View source for Stk1160

This article covers all the tunerless USB 2.0 video and audio capture devices which are based on the STK1160 chip from [http://www.stk.com.tw/product-01.asp?Product_Type=32 Syntec Semiconductor.co.ltd.]. This device is convenient for capturing from cameras, VHS-tapes, receivers ... and even for small surveillance installation (4 inputs model).

Many but not all of these devices are branded as [[Easycap]]. Althought this device is sold with different names and labels, in many forums and blogs this device is called "EasyCAP DC60".

==Overview/Features==
* USB ID 05e1:0408
* USB 2.0 interface (USB 1.1 will not work, it's too slow).
* Video capturing up to 720x576px @ 25fps (PAL) and 720x480px @ 30fps (NTSC) 
* Inputs: (Model 001) CVBS, S-VIDEO, AUDIO(L), AUDIO(R)
* Inputs: (Model 002) 4 yellow input cables (CVBS) labelled 1, 2, 3, 4 and one white unlabelled audio cable
* Audioquality: Model 001 has AC'97 audio (48000 Hz samplerate), model 002 (and some models 001 where the AC'97 chip is missing) has mono microphone audio (8000 Hz samplerate).

===Components Used===
* Syntek STK1160 (USB video bridge)
* [http://www.silan.com.cn/english/product/ProductItemDetail.aspx?id=18&pid=20090706092630633824691909652010&c=%E8%A7%86%E9%A2%91%E7%94%B5%E8%B7%AF Silan SC8113] or GM7113 (Philips SAA7113 compatible video decoder chips)
* AC'97 audio processor (from different manufacturers. In models where this chip is missing (2 chip stk1160 Easycaps) audio capturing is done by the STK1160 chips built-in 8 bit ADC for mono microphone audio recording.) 

===Other Images===
<gallery>
 Image:Easycap.png|STK1160 based capture devices: Model 001 (left) Model 002 (right)
 Image:dc60-front.jpg|Front side of board
 Image:dc60-back.jpg|Back side of board
</gallery>

===Identification===
 # lsusb
 Bus 001 Device 003: ID 05e1:0408 Syntek Semiconductor Co., Ltd STK1160 Video Capture Device

[[Stk1160#Full_lsusb_-v_output|lsusb -v see below]]

==== Identify the audiotype of your device ====

The following shell command reports the audiorate (sampling frequency) of your STK1160 based device: 

 lsusb -v -d 05e1:0408 | grep tSamFreq | sed -e "s,^.* ,,"

* 48000 = Model with AC'97 chip
* 8000 = Model without AC'97 chip (currently not supported by the stk1160 driver)


==Making it Work==
STK1160 based devices ar supported under Linux since kernel 2.6.38

===Drivers===

==== stk1160 driver ====
The stk1160 driver is in the mainline kernel since version 3.7. It is the successor of the legacy easycap driver (see below). 

The stk1160 module supports:
* V4L2 video capturing
* audio capturing via ALSA (only the 48000Hz Easycap is supported)

====== Enable sound capture  ======

The stk1160 module registers a control-only alsa soundcard. This sound card is called '''stk1160-mixer'''.
The real sound capture is done through the '''Controlle''' soundcard which is created after plugging in the STK1160 device by the '''snd_usb_audio''' module.

On a fresh installed system, or if you have installed the driver by yourself, you once (!) need to enable sound capture from '''stk1160-mixer''' in the mixer settings.

To enable sound capture you have to select in alsamixer the '''Line''' item on the capture menu for stk1160-mixer when the STK1160 device is plugged in:
You can do this in the terminal as well with this command:

 # amixer -c stk1160mixer sset Line unmute cap 

Note! In the viewing- or capturing program you must then select the '''Controlle''' soundcard or its number to hear sound!

===== Limitations  =====

====== AC'97 audio only ======

The stk1160 module only supports audio capturing from the CVBS + S-Video Easycap with builtin AC'97 chip (3 chip stk1160 Easycap; 48000Hz model). Adding support for the 8 bit ADC in the stk1160 chip is planned in the future.

If you have the 4 CVBS model or the CVBS + S-Video model without AC'97 chip the dmesg messages look like this:
 # dmesg 
 [12677.625434] usb 2-2: new high-speed USB device number 8 using ehci-pci
 [12677.740513] usb 2-2: New device Syntek Semiconductor USB 2.0 Video
 Capture Controller @ 480 Mbps (05e1:0408, interface 0, class 0)
 [12677.740517] usb 2-2: video interface 0 found
 [12678.217418] stk1160: driver ver 0.9.5 successfully loaded
 [12678.220618] '''AC'97 0 access is not valid [0x0], removing mixer.'''
 [12678.220623] stk1160: registers to NTSC like standard
 [12678.221681] stk1160 2-2:1.0: V4L2 device registered as video1
In this case you maybe can get some crappy sound through the '''Controlle''' soundcard created by the '''snd_usb_audio''' module, but if you want to capture hight quality sound you need to plug in the audio source to the Line in plug of your built-in soundcard. (You only need to change the number of the sound device in the capturing program if you want to watch/ record video with sound.)

====== Framescaling is not supported  ======

Unlike the legacy easycapdriver the stk1160 driver doesn't support framescaling. 
This is important for some programs where setting width and height of the video stream (e.g. Zonemeinder) is necessary. Other settings than 720x576 PAL or 720x480 NTSC may cause proplems with those programs.

===== Known issues =====

* Easycap devices which have the gm7113 video decoder chip (saa7113 clone) inside don't work on stk1160 in kernel under 3.11, but do work on the legacy easycap driver.
* There is an unresolved problem with the sound capture. It is expressed in a constant background noise. Sound much worse in stereo. [http://marc.info/?l=linux-sound&m=139223599126215&w=2 Issue link.]
* Audio chip is not recognized properly by the snd_usb_audio driver. But the default settings apply and it does not affect the issue with the sound.
* To one root hub port can connect only one device. Can connect multiple, but at the same time only one operate. This not an power supply issue, since the device consumes only 200mA in operation mode. Number of devices that can simultaneously connect to PC depends on the amount root hub ports.
* The xhci_hcd driver in charge of USB 3.0 very often crashes when using the stk1160 driver. This happens when the video turn on or off.

===== Sourcecode =====

If you want to use the stk1160 driver under previous kernels (3.2, 3.4 or 3.6 kernel only !), you can get the sourcecode frome here:

[https://github.com/ezequielgarcia/stk1160-standalone stk1160 github repository]

Select the svideo2_for_3.2 version if you want to use the s-video input of yout stk1160 device.

[http://easycap.blogspot.co.at/2012/07/new-driver-for-easycap-dc60-stk1160.html Additional installation instructions]



==== legacy easycap driver ====
The easycap driver is part of the kernel from  2.6.38 up to 3.6.x and supports all the features of the STK1160 based devices but has some limitations (framedropping, stability, sound issues).

===== easycap audio support =====

The eascap module supports audio from the 48000Hz and the 8000Hz models.

The easycap module creates an additional ALSA soundcard '''EasyALSA0'''. 

Often when the STK1160 device is plugged in the '''snd_usb_audio''' module conflicts with the easycap module and the EasyALSA0 soundcard is not created. As a workaround you need to unplug the device, unload the module (rmmod snd_usb_audio) and then plug in the device again.

If you encounter audio problems while capturing you need to specify the correct audiorate of your model (48000 or 8000) in the capturing program. 

===Sample Kernel Output===

==== easycap module ====
 # dmesg 
 [  250.728092] usb 1-2: new high speed USB device number 4 using ehci_hcd
 [  254.681355] easycap::0adjust_standard: selected standard: PAL_BGHIN
 [  254.992254] easycap::0adjust_format: sought:    640x480,UYVY(0x59565955),1=field,0x00=std mask
 [  254.992263] easycap::0adjust_format: sought:    V4L2_FIELD_NONE
 [  254.992273] easycap::0adjust_format: actioning: 640x480 PAL_BGHIN_AT_640x480_FMT_UYVY-n
 [  255.016137] easycap::0adjust_brightness: adjusting brightness to  0x7F
 [  255.040149] easycap::0adjust_contrast: adjusting contrast to  0x3F
 [  255.064162] easycap::0adjust_saturation: adjusting saturation to  0x2F
 [  255.088173] easycap::0adjust_hue: adjusting hue to  0x00
 [  255.089557] easycap::0easycap_usb_probe: registered with videodev: 0=minor
 [  255.089565] easycap::0easycap_usb_probe: ends successfully for interface 0
 [  255.089713] easycap::0easycap_usb_probe: ends successfully for interface 1
 [  255.090017] easycap::0easycap_usb_probe: audio hardware is AC'97
 [  255.090485] easycap::0easycap_alsa_probe: registered EasyALSA0
 [  255.090492] easycap::0easycap_usb_probe: ends successfully for interface 2
 [  255.091910] easycap:: easycap_open: ==========OPEN=========
 [  255.161078] easycap::0audio_setup: 0x414C:0x4760 is audio vendor id
 [  255.181331] easycap::0audio_setup: 0x414C:0x4760 is audio vendor id
 [  255.263624] easycap::0audio_setup: 0x414C:0x4760 is audio vendor id
 [  255.345927] easycap::0audio_setup: 0x414C:0x4760 is audio vendor id
 [  255.432975] easycap::0audio_setup: 0x414C:0x4760 is audio vendor id
 [  255.525395] easycap::0audio_setup: 0x414C:0x4760 is audio vendor id
 [  255.631195] snd_pcm_update_hw_ptr0: 24 callbacks suppressed
 [  256.341308] easycap::0adjust_standard: selected standard: PAL_BGHIN
 [  256.652338] easycap::0adjust_format: sought:    640x480,UYVY(0x59565955),1=field,0x00=std mask
 [  256.652346] easycap::0adjust_format: sought:    V4L2_FIELD_NONE
 [  256.652355] easycap::0adjust_format: actioning: 640x480 PAL_BGHIN_AT_640x480_FMT_UYVY-n
 [  256.676218] easycap::0adjust_brightness: adjusting brightness to  0x7F
 [  256.700233] easycap::0adjust_contrast: adjusting contrast to  0x3F
 [  256.724242] easycap::0adjust_saturation: adjusting saturation to  0x2F
 [  256.748129] easycap::0adjust_hue: adjusting hue to  0x00 

==== stk1160 module  ====
 
 # dmesg
 [16873.944081] usb 1-2: new high-speed USB device number 2 using ehci_hcd
 [16874.892446] Linux video capture interface: v2.00
 [16875.012940] usb 1-2: New device Syntek Semiconductor USB 2.0 Video Capture Controller @ 480 Mbps (05e1:0408, interface 0, class 0)
 [16875.012949] usb 1-2: video interface 0 found
 [16875.836259] saa7115 14-0025: saa7113 found (1f7113d0e100000) @ 0x4a (stk1160)
 [16877.372155] stk1160: driver ver 0.9.3 successfully loaded
 [16877.469999] stk1160: registers to NTSC like standard
 [16877.792436] stk1160 1-2:1.0: V4L2 device registered as video0
 [16877.793733] usbcore: registered new interface driver snd-usb-audio
 [16877.795409] usbcore: registered new interface driver stk1160


== Usage ==

The STK1160 device needs a USB 2.0 capable USB port. USB 1.1 will not work (it's too slow). 

The driver for the STK1160 device creates a /dev/video'''N''' node and an ALSA soundcard, The different video-inputs of the device can be accessed by their inputnumber (starting at 0). <br/>
''From the two or four video cables on the device only one (!) can be used at the same time. If you want to switch through the different inputs of your card you need to start the capturing program again with the next input number.''

In the viewing/ capturing program (e.g. mplayer) you must specify
* the videodevicenode of the STK1160 card (/dev/video'''N'''), 
* the input number of the cable where the source is plugged in, 
* the TV norm of the videosource and (e.g. PAL, NTSC)
* the ALSA sounddevice if you want to capture audio. Get a list of ALSA soundcards with this command:
 # cat /proc/asound/cards

''If you encounter audio problems while capturing you need to specify the [[Stk1160#Identify_the_audiotype_of_your_device|correct audiorate]] of your model in the capturing program.''

=== Example for mplayer ===
Assumed that your STK1160 device is the second videodevice (the first is your webcam) and the second soundcard on your system, and that on the first CVBS input a PAL camera is plugged in and sound also comes from the STK1160 device, the mplayer command for viewing would look like this:

 mplayer tv:// -tv driver=v4l2:norm=PAL:width=720:height=576:outfmt=uyvy:device=/dev/video1:input=0:\
 alsa:adevice=hw.1:audiorate=48000:forceaudio:immediatemode=0 -ao sdl

=== More programs ===
These programs are known to be useful for analogue audio- and videocapturing with STK1160 based (and similar) devices.

* qv4l2 - useful for testing
* mplayer and mencoder
* [http://code.google.com/p/mtvcgui/ mtvcgui] - Python GUI for mplayer and mencoder
* VLC
* TVtime
* avconv (libav; formerly ffmpeg)
* Zoneminder - Linux surveillance suite
* Any other program which is capable of analogue video- and audiocapturing will probably work with STK1160 devices.


== Short linux driver history ==
In early 2010 [http://sourceforge.net/projects/easycapdc60/ Mike Thomas] started developing a driver for the STK1160 based video capture device which is sold as EasyCAP DC60. He used the [http://sourceforge.net/projects/syntekdriver/ stk11xx] driver and some existing [http://ubuntuforums.org/showthread.php?t=924504&page=3 patches] for the "05e1:0408" Syntek device as a basis for his project. Since the easycapdriver (version 0.9) has been added to the staging directory of the Linux kernel in November 2011 Mike Thomas stopped his development and support.

Some people added changes in order to clean up the sourcecode. These changes didn't hardly affect the limitations (framedropping, stability) of the driver.

At the middle of 2012 [https://github.com/ezequielgarcia/stk1160-standalone Ezequiel Garcia] decided to rework the easycapdriver. He changed the drivers name to "stk1160". 

In the 3.7 kernel release the legacy easycapdriver has been replaced by the stk1160 driver.


== Summary ==
stk1160
* audio: poor
* video: good
* stability: poor

easycap
* audio: good
* video: poor
* stability: good (not tested fully)


==External Links==

* [http://easycap.blogspot.co.at easycap.blogspot.co.at]  Blog supporting STK1160 based EasyCAP devices 


== Full lsusb -v output ==

The following lsusb -v output is from the STK1160 based model 001 with builtin AC'97 audio processor:
 # lsusb -v
 Bus 001 Device 002: ID 05e1:0408 Syntek Semiconductor Co., Ltd STK1160 Video Capture Device
 Couldn't open device, some information will be missing
 Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  idVendor           0x05e1 Syntek Semiconductor Co., Ltd
  idProduct          0x0408 STK1160 Video Capture Device
  bcdDevice            0.05
  iManufacturer           1 
  iProduct                2 
  iSerial                 0 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength          251
    bNumInterfaces          3
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0x80
      (Bus Powered)
    MaxPower              500mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol    255 Vendor Specific Protocol
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0000  1x 0 bytes
        bInterval               5
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            1
          Transfer Type            Isochronous
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0000  1x 0 bytes
        bInterval               1
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       1
      bNumEndpoints           2
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol    255 Vendor Specific Protocol
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0002  1x 2 bytes
        bInterval               5
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            1
          Transfer Type            Isochronous
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0300  1x 768 bytes
        bInterval               1
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       2
      bNumEndpoints           2
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol    255 Vendor Specific Protocol
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0002  1x 2 bytes
        bInterval               5
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            1
          Transfer Type            Isochronous
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x03fc  1x 1020 bytes
        bInterval               1
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       3
      bNumEndpoints           2
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol    255 Vendor Specific Protocol
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0002  1x 2 bytes
        bInterval               5
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            1
          Transfer Type            Isochronous
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               1
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       4
      bNumEndpoints           2
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol    255 Vendor Specific Protocol
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0002  1x 2 bytes
        bInterval               5
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            1
          Transfer Type            Isochronous
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0c00  2x 1024 bytes
        bInterval               1
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       5
      bNumEndpoints           2
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol    255 Vendor Specific Protocol
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0002  1x 2 bytes
        bInterval               5
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            1
          Transfer Type            Isochronous
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x1400  3x 1024 bytes
        bInterval               1
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       0
      bNumEndpoints           0
      bInterfaceClass         1 Audio
      bInterfaceSubClass      1 Control Device
      bInterfaceProtocol      0 
      iInterface             11 
      AudioControl Interface Descriptor:
        bLength                 9
        bDescriptorType        36
        bDescriptorSubtype      1 (HEADER)
        bcdADC               1.00
        wTotalLength           38
        bInCollection           1
        baInterfaceNr( 0)       2
      AudioControl Interface Descriptor:
        bLength                12
        bDescriptorType        36
        bDescriptorSubtype      2 (INPUT_TERMINAL)
        bTerminalID             1
        wTerminalType      0x0602 Digital Audio Interface
        bAssocTerminal          0
        bNrChannels             2
        wChannelConfig     0x0003
          Left Front (L)
          Right Front (R)
        iChannelNames           0 
        iTerminal               0 
      AudioControl Interface Descriptor:
        bLength                 9
        bDescriptorType        36
        bDescriptorSubtype      3 (OUTPUT_TERMINAL)
        bTerminalID             2
        wTerminalType      0x0101 USB Streaming
        bAssocTerminal          0
        bSourceID               3
        iTerminal               0 
      AudioControl Interface Descriptor:
        bLength                 8
        bDescriptorType        36
        bDescriptorSubtype      6 (FEATURE_UNIT)
        bUnitID                 3
        bSourceID               1
        bControlSize            1
        bmaControls( 0)      0x01
          Mute Control
        iFeature                0 
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        2
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         1 Audio
      bInterfaceSubClass      2 Streaming
      bInterfaceProtocol      0 
      iInterface             11 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x84  EP 4 IN
        bmAttributes            5
          Transfer Type            Isochronous
          Synch Type               Asynchronous
          Usage Type               Data
        wMaxPacketSize     0x0000  1x 0 bytes
        bInterval               1
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        2
      bAlternateSetting       1
      bNumEndpoints           1
      bInterfaceClass         1 Audio
      bInterfaceSubClass      2 Streaming
      bInterfaceProtocol      0 
      iInterface             11 
      AudioStreaming Interface Descriptor:
        bLength                 7
        bDescriptorType        36
        bDescriptorSubtype      1 (AS_GENERAL)
        bTerminalLink           2
        bDelay                  1 frames
        wFormatTag              1 PCM
      AudioStreaming Interface Descriptor:
        bLength                11
        bDescriptorType        36
        bDescriptorSubtype      2 (FORMAT_TYPE)
        bFormatType             1 (FORMAT_TYPE_I)
        bNrChannels             2
        bSubframeSize           2
        bBitResolution         16
        bSamFreqType            1 Discrete
        tSamFreq[ 0]        48000
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x84  EP 4 IN
        bmAttributes            5
          Transfer Type            Isochronous
          Synch Type               Asynchronous
          Usage Type               Data
        wMaxPacketSize     0x0100  1x 256 bytes
        bInterval               4
        AudioControl Endpoint Descriptor:
          bLength                 7
          bDescriptorType        37
          bDescriptorSubtype      1 (EP_GENERAL)
          bmAttributes         0x00
          bLockDelayUnits         0 Undefined
          wLockDelay              0 Undefined





[[Category:Analog USB Devices]] [[Category:Capture Devices]] [[Category:Hardware]] [[Category:Drivers]]