View source for VirtualBox: Mengatasi vboxdrv yang tidak bisa jalan

sumber: https://askubuntu.com/questions/760671/could-not-load-vboxdrv-after-upgrade-to-ubuntu-16-04-and-i-want-to-keep-secur

==BIOS==

Pastikan

* VT (Virtualization Technology) '''ENABLED'''
* SecureBoot '''DISABLED'''


==MOK==

	

On my system I did the following to make it work:

Run mokutil:

 sudo mokutil --disable-validation

Then mokutil asked me to set a password for the MOK Manager. After rebooting the PC the BIOS showed a dialog to configure the MOK Manager. I disabled SecureBoot from this dialog, it asked for several characters from the password (ie. enter character (5), etc).

After booting up the vboxdrv modules loaded correctly.

 lsmod | grep vboxdrv
 vboxdrv               454656  3 vboxnetadp,vboxnetflt,vboxpci

Curiously, mokutil still shows SecureBoot is enabled:

 sudo mokutil --sb-state
 SecureBoot enabled

==Alternatif Lain==

Lakukan

 sudo apt-get install build-essential libssl-dev linux-headers-`uname -r`
 sudo apt-get --reinstall install virtualbox-dkms


==Alternatif Lain==

Set alias

 alias dkms-buildall='sudo ./wherever/your/script/is'

Script

 #!/bin/env python
 #
 # NOTE: This assumes that all modules and versions are built for at
 #       least one kernel. If that's not the case, adapt parsing as needed.
 import os
 import subprocess 
 
 # Permission check.
 if os.geteuid() != 0:
     print "You need to be root to run this script."
     exit(1)
 
 # Get DKMS status output.
 cmd = ['dkms', 'status']
 process = subprocess.Popen(cmd, stdout=subprocess.PIPE)
 dkms_status = process.communicate()[0].strip('\n').split('\n')
 dkms_status = [x.split(', ') for x in dkms_status]
 
 # Get kernel versions (probably crap).
 cmd = ['ls', '/var/lib/initramfs-tools/']
 # Alternative (for use with Arch Linux for example)
 # cmd = ['ls', '/usr/lib/modules/']
 process = subprocess.Popen(cmd, stdout=subprocess.PIPE)
 kernels = process.communicate()[0].strip('\n').split('\n')
 
 # Parse output, 'modules' will contain all modules pointing to a set
 # of versions.
 modules = {}
 
 for entry in dkms_status:
    module = entry[0]
    version = entry[1].split(': ')[0]
    try:
       modules[module].add(version)
    except KeyError:
       # We don't have that module, add it.
       modules[module] = set([version])
 
 # For each module, build all versions for all kernels.
 for module in modules:
    for version in modules[module]:
       for kernel in kernels:
          cmd = ['dkms', 'build', '-m', module, '-v', version, '-k', kernel]
          ret = subprocess.call(cmd)

Cek

 dkms status
 sudo python dkms.py


==Alternatif==

 sudo apt-get install linux-headers-`uname -r`
 sudo dpkg-reconfigure virtualbox-dkms

 sudo apt-get install linux-headers-generic
 sudo dpkg-reconfigure virtualbox-dkms

 sudo dpkg-reconfigure virtualbox-dkms
 sudo dpkg-reconfigure virtualbox
 sudo modprobe vboxdrv
 sudo modprobe vboxnetflt

==Referensi==

* https://askubuntu.com/questions/760671/could-not-load-vboxdrv-after-upgrade-to-ubuntu-16-04-and-i-want-to-keep-secur
* https://askubuntu.com/questions/506405/how-do-i-fix-a-vboxdrv-setup-failure-in-virtualbox
* https://askubuntu.com/questions/53364/command-to-rebuild-all-dkms-modules-for-all-installed-kernels