Onnowpurbo: New page: An '''analog telephony adapter''', or '''analog telephone adapter''', ('''ATA''') is a device used to connect one or more standard analog telephones to a digital telephone system (such as ...

2012-03-11T00:55:25Z

New page: An '''analog telephony adapter''', or '''analog telephone adapter''', ('''ATA''') is a device used to connect one or more standard analog telephones to a digital telephone system (such as ...

New page

An '''analog telephony adapter''', or '''analog telephone adapter''', ('''ATA''') is a device used to connect one or more standard analog telephones to a digital telephone system (such as [[Voice over IP]]) or a non-standard telephone system.

An ATA usually takes the form of a small box with a power adapter, one [[Ethernet]] port, one or more [[Foreign exchange station|FXS]] telephone ports and may also have a [[Foreign exchange office|FXO]] link. Users can plug one or more standard analog [[telephone]] devices into the ATA and the [[analog device]](s) will operate, usually transparently, on a [[Voice over IP|VoIP]] network.

The most common ATA is a box with at least one [[Foreign eXchange Station]] (which includes a [[telephone jack]]), used to connect a conventional telephone, and an Ethernet jack used to connect the adapter to a [[LAN]]. Using such an ATA, it is possible to connect a conventional telephone to a remote VoIP server. The ATA communicates with the server using a protocol such as [[H.323]], [[Session Initiation Protocol|SIP]], [[MGCP]], [[Skinny Client Control Protocol|SCCP]] or [[Inter-Asterisk eXchange|IAX]], and encodes and decodes the voice signal using a voice codec such as [[G.711]], [[G.729]], [[GSM]], [[iLBC]] or others. Since the ATA communicates directly with the VoIP server, it does not require a personal computer or any software such as a [[softphone]]. It uses approximately 3 to 5 watts of electricity, depending on model and brand.

==Purpose==
An ATA is connected between an [[IP network]] (such as a broadband connection) and an existing [[telephone jack]] in order to provide service nearly indistinguishable from [[Public switched telephone network|PSTN]] providers on all the other telephone jacks in the residence. ATAs are used by many VoIP companies selling a telco-alternative VoIP service, where the device is used to replace a user's connection to a traditional telephone company. When sold in connection with a VoIP service, the ATA is often locked so it cannot be used with a competing service, and the user can only partly change its configuration. Some providers do sell devices that are not locked and can be used with any compatible provider. This type of service, which is fixed to one location, is generally offered by broadband Internet providers such as cable companies and telephone companies as a cheaper flat-rate traditional phone service.

Analog Telephone Adapter - Revision history

Onnowpurbo: New page: An '''analog telephony adapter''', or '''analog telephone adapter''', ('''ATA''') is a device used to connect one or more standard analog telephones to a digital telephone system (such as ...