Arduino: PCM Audio Play - Revision history

Onnowpurbo: /* Code */

2018-05-29T04:46:42Z

Code

@@ Line 45: / Line 45: @@
   void loop() {
+  }
 ==Fungsi TMPpcm==

Onnowpurbo: /* Code */

2018-05-29T04:45:05Z

Code

← Older revision		Revision as of 04:45, 29 May 2018
Line 19:		Line 19:


	~~#include "SD.h"~~
	~~#define SD_ChipSelectPin 4~~
	#include "TMRpcm.h"		#include "TMRpcm.h"
	#include "SPI.h"		#include <SPI.h>
			#include <SD.h>

	TMRpcm ~~tmrpcm~~;		char mychar;
			const int CS_PIN = 4;
			TMRpcm audio;

	void setup(){		void setup() {
	~~tmrpcm~~.speakerPin = 9;		audio.speakerPin = 9;
	Serial.begin(9600);		audio.setVolume(3); // volume 3 supaya suara tidak pecah
	if (!SD.begin(~~SD_ChipSelectPin~~)) {		// put your setup code here, to run once:
	Serial.println("~~SD fail~~");		Serial.begin(9600);
	return;		Serial.println("Initializing Card");
			pinMode(CS_PIN, OUTPUT);
			if(!SD.begin(CS_PIN)) {
			Serial.println("Card Failure");
			return;
	}		}
			Serial.println("Card Ready");
			audio.play("MORAT.WAV");
			Serial.println("Done");
			}

	~~tmrpcm.quality~~(1);		void loop() {
	~~tmrpcm.setVolume(2);~~
	~~tmrpcm.play("morat.wav");~~
	}		}

	~~void loop(){~~
	~~if( tmrpcm.isPlaying()==1 ) Serial.println("is playing");~~
	}

	==Code==		==Code==

Onnowpurbo: /* Code */

2018-05-29T04:06:14Z

Code

@@ Line 42: / Line 42: @@
     if( tmrpcm.isPlaying()==1 ) Serial.println("is playing");
+    }
 ==Fungsi TMPpcm==

Onnowpurbo at 10:45, 28 May 2018

2018-05-28T10:45:37Z

← Older revision		Revision as of 10:45, 28 May 2018
Line 58:		Line 58:
	audio.setVolume(0); 0 to 7. Set volume level		audio.setVolume(0); 0 to 7. Set volume level
	audio.loop(1); 0 or 1. Can be changed during playback for full control of looping.		audio.loop(1); 0 or 1. Can be changed during playback for full control of looping.


			Pada saat lagu dimainkan aplikasi loop akan jalan terus.

Onnowpurbo: /* Code */

2018-05-28T10:42:25Z

Code

← Older revision		Revision as of 10:42, 28 May 2018
Line 38:		Line 38:
	tmrpcm.play("morat.wav");		tmrpcm.play("morat.wav");
	}		}

	void loop(){		void loop(){
	if( tmrpcm.isPlaying()==1 ) Serial.println("is playing");		if( tmrpcm.isPlaying()==1 ) Serial.println("is playing");
	}		}


	==Fungsi TMPpcm==		==Fungsi TMPpcm==

Onnowpurbo at 10:41, 28 May 2018

2018-05-28T10:41:45Z

← Older revision		Revision as of 10:41, 28 May 2018
Line 42:		Line 42:
	if( tmrpcm.isPlaying()==1 ) Serial.println("is playing");		if( tmrpcm.isPlaying()==1 ) Serial.println("is playing");
	}		}


			==Fungsi TMPpcm==


			TMRpcm audio;
			audio.play("filename"); plays a file
			audio.play("filename",30); plays a file starting at 30 seconds into the track
			audio.speakerPin = 11; set to 5,6,11 or 46 for Mega, 9 for Uno, Nano, etc.
			audio.disable(); disables the timer on output pin and stops the music
			audio.stopPlayback(); stops the music, but leaves the timer running
			audio.isPlaying(); returns 1 if music playing, 0 if not
			audio.pause(); pauses/unpauses playback
			audio.quality(1); Set 1 for 2x oversampling
			audio.volume(0); 1(up) or 0(down) to control volume
			audio.setVolume(0); 0 to 7. Set volume level
			audio.loop(1); 0 or 1. Can be changed during playback for full control of looping.

Onnowpurbo at 10:33, 28 May 2018

2018-05-28T10:33:48Z

← Older revision		Revision as of 10:33, 28 May 2018
Line 5:		Line 5:
	unzip master.zip		unzip master.zip
	mv TMRpcm-master/ TMRpcm		mv TMRpcm-master/ TMRpcm

			Edit

			cd ~/Arduino/libraries/TMRpcm
			vi pcmConfig.h

			Pastikan,

			#define DISABLE_SPEAKER2


	==Code==		==Code==


	#include "SD.h"		#include "SD.h"
Line 19:		Line 30:
	Serial.begin(9600);		Serial.begin(9600);
	if (!SD.begin(SD_ChipSelectPin)) {		if (!SD.begin(SD_ChipSelectPin)) {
	Serial.println("SD fail");		Serial.println("SD fail");
	return;		return;
	}		}

	tmrpcm.setVolume(6);		tmrpcm.quality(1);
	tmrpcm.play("~~rain~~.wav");		tmrpcm.setVolume(2);
			tmrpcm.play("morat.wav");
	}		}

	void loop(){ }		void loop(){
			if( tmrpcm.isPlaying()==1 ) Serial.println("is playing");
			}

Onnowpurbo: Created page with "Install TMRpcm library cd ~/Arduino/libraries/ wget https://github.com/TMRh20/TMRpcm/archive/master.zip unzip master.zip mv TMRpcm-master/ TMRpcm ==Code== #include "SD..."

2018-05-27T05:58:13Z

Created page with "Install TMRpcm library cd ~/Arduino/libraries/ wget https://github.com/TMRh20/TMRpcm/archive/master.zip unzip master.zip mv TMRpcm-master/ TMRpcm ==Code== #include "SD..."

New page

Install TMRpcm library

cd ~/Arduino/libraries/
wget https://github.com/TMRh20/TMRpcm/archive/master.zip
unzip master.zip
mv TMRpcm-master/ TMRpcm

==Code==

#include "SD.h"
#define SD_ChipSelectPin 4
#include "TMRpcm.h"
#include "SPI.h"

TMRpcm tmrpcm;

void setup(){
tmrpcm.speakerPin = 9;
Serial.begin(9600);
if (!SD.begin(SD_ChipSelectPin)) {
Serial.println("SD fail");
return;
}

tmrpcm.setVolume(6);
tmrpcm.play("rain.wav");
}

void loop(){ }