Free5GC: Install - Revision history

Unknown user: /* Appendix A: Program the SIM Card */

2022-12-21T02:14:27Z

Appendix A: Program the SIM Card

← Older revision		Revision as of 02:14, 21 December 2022
Line 398:		Line 398:
	==Appendix A: Program the SIM Card==		==Appendix A: Program the SIM Card==

	Install ~~packages~~:		Install package:

	sudo apt-get install pcscd pcsc-tools libccid python-dev swig python-setuptools python-pip libpcsclite-dev		sudo apt-get install pcscd pcsc-tools libccid python-dev swig python-setuptools python-pip libpcsclite-dev
Line 407:		Line 407:
	git clone git://git.osmocom.org/pysim.git		git clone git://git.osmocom.org/pysim.git

	~~Change to~~ pyscard ~~folder and~~ install		CD ke folder pyscard dan install

	cd <pyscard-path>		cd <pyscard-path>
	sudo /usr/bin/python setup.py build_ext install		sudo /usr/bin/python setup.py build_ext install

	Verify ~~your~~ reader ~~is ready~~		Verify bahwa reader kita sudah siap

	sudo pcsc_scan		sudo pcsc_scan

	~~Check whether your~~ reader ~~can read the~~ SIM card		Cek apakah reader kita dapat membaca SIM card

	cd <pysim-path>		cd <pysim-path>
	./pySim-read.py –p 0		./pySim-read.py –p 0

	Program ~~your~~ SIM card information		Program / isi SIM card dengan information

	./pySim-prog.py -p 0 -x 208 -y 93 -t sysmoUSIM-SJS1 -i 208930000000003 --op=8e27b6af0e692e750f32667a3b14605d -k 8baf473f2f8fd09487cccbd7097c6862 -s 8988211000000088313 -a 23605945		./pySim-prog.py -p 0 -x 208 -y 93 -t sysmoUSIM-SJS1 -i 208930000000003 --op=8e27b6af0e692e750f32667a3b14605d -k 8baf473f2f8fd09487cccbd7097c6862 -s 8988211000000088313 -a 23605945

	~~You can get your~~ SIM ~~card from~~ sysmocom. ~~You also need a card reader to write your~~ SIM ~~card~~. ~~You can get a card reader from here or equivalent device will do~~.		Anda bisa mendapatkan kartu SIM Anda dari sysmocom. Anda juga memerlukan pembaca kartu untuk menulis kartu SIM Anda. Anda bisa mendapatkan pembaca kartu dari sini atau perangkat yang setara akan melakukannya.

	==Referensi==		==Referensi==

Unknown user: /* Troubleshooting */

2022-12-21T02:12:31Z

Troubleshooting

← Older revision		Revision as of 02:12, 21 December 2022
Line 345:		Line 345:
	==Troubleshooting==		==Troubleshooting==

	~~Note for modifying configuration~~ file		Catatan untuk memodifikasi file konfigurasi
	~~Use space for~~ indent. ~~DO NOT use~~ tab.		* Gunakan spasi untuk indent. JANGAN gunakan tab.
	~~A white space must be added between the colon and value after the~~ item ~~name~~, ~~e.g~~. addr: 192.188.2.2		* Spasi harus ditambahkan di antara titik dua dan nilai setelah nama item, mis. addr: 192.188.2.2

			Jalankan,


	./test/testngc test failure		./test/testngc test failure

	~~Make sure all configuration files and environment settings are correct~~.		Pastikan semua file konfigurasi dan pengaturan lingkungan sudah benar.

			Kill semua proses testngc yang tidak selesai dengan benar

	~~Kill testngc process which didn’t finish correctly~~

	killall -9 testngc		killall -9 testngc

	~~Remove~~ test subscriber ~~left by previous failed test~~ (NextEPC issue #57)
			Hapus test subscriber yang ditinggalkan oleh pengujian gagal sebelumnya (NextEPC issue #57)

	$ mongo		$ mongo
Line 366:		Line 371:
	./free5gc-ngcd errors		./free5gc-ngcd errors

	ERRR: - ~~The~~ certificate ~~is expired~~ (NextEPC issue #94)		ERRR: - certificate expire (NextEPC issue #94)

	cd support/freeDiameter		cd support/freeDiameter
Line 373:		Line 378:
	make install		make install

	Address ~~already in use~~		Address telah digunakan

	$ killall -9 testngc		$ killall -9 testngc

	or		atau

	$ killall -9 free5gc-ngcd		$ killall -9 free5gc-ngcd

	Rebuild ~~failure~~		Kegagalan Rebuild

	config.status: error: cannot find input file: `Makefile.in' (NextEPC issue #68)		config.status: error: cannot find input file: `Makefile.in' (NextEPC issue #68)

Unknown user: /* Rebuild Project */

2022-12-21T02:07:40Z

Rebuild Project

← Older revision		Revision as of 02:07, 21 December 2022
Line 330:		Line 330:
	==Rebuild Project==		==Rebuild Project==

	~~To completely rebuild the project after modifying~~ source code		Untuk sepenuhnya membangun kembali proyek setelah memodifikasi source code


	(Control-C kill free5gc-ngcd)		(Control-C kill free5gc-ngcd)

Unknown user: /* Add subscriber (UE) */

2022-12-21T02:06:57Z

Add subscriber (UE)

← Older revision		Revision as of 02:06, 21 December 2022
Line 309:		Line 309:
	tac: <eNB TAC: 1>		tac: <eNB TAC: 1>

	==~~Add~~ subscriber (UE)==		==Tambahkan subscriber (UE)==

	~~Add a~~ subscriber ~~by the~~ Web UI		Tambahkan subscriber melalui Web UI
	Run ~~the~~ web server:		Run web server:

	cd ./webui && npm run dev		cd ./webui && npm run dev

	~~Visit~~ http://localhost:3000		Masuk ke http://localhost:3000
	- Username : admin		* Username : admin
	- Password : 1423		* Password : 1423
	~~Add a subscriber with IMSI, K, OPc~~
	~~- Go to Subscriber Menu.~~
	~~- Click `+` Button to add a new subscriber.~~
	~~- Fill the IMSI, security context(K, OPc, AMF), and APN of the subscriber.~~
	~~- Click `SAVE` Button~~

	~~This addition will take effect immediately on~~ free5GC ~~without restaring any~~ daemon.		Tambahkan subscriber dengan IMSI, K, OPc
			* Masuk ke menu Subscriber.
			* Click Tombol `+` untuk menambahkan subscriber baru.
			* Isi IMSI, security context(K, OPc, AMF), dan APN dari subscriber.
			* Click Tombol `SAVE`

			Penambahan ini akan langsung berlaku di free5GC tanpa perlu me-restart daemon apa pun.

	==Rebuild Project==		==Rebuild Project==

Unknown user: /* Core Network Configuration */

2022-12-21T02:04:18Z

Core Network Configuration

← Older revision		Revision as of 02:04, 21 December 2022
Line 273:		Line 273:
	Sekarang server web berjalan di http://localhost:3000. username dan password default adalah "admin" dan "1423".		Sekarang server web berjalan di http://localhost:3000. username dan password default adalah "admin" dan "1423".

	==Core Network ~~Configuration~~==		==Konfigurasi Core Network==

	free5GC ~~configuration file~~		file konfigurasi free5GC
	~~Modify~~ ./install/etc/free5gc/free5gc.conf		Ubah ./install/etc/free5gc/free5gc.conf

	amf-slap address (line 67)		amf-slap address (line 67)

	amf:		amf:
	s1ap:		s1ap:
	addr: <IP of GW NIC to eNB: 192.188.2.2>		addr: <IP of GW NIC to eNB: 192.188.2.2>

	upf-gtpu address (line 162)		upf-gtpu address (line 162)

	smf:		smf:
	upf:		upf:
	addr: <IP of GW NIC to eNB: 192.188.2.2>		addr: <IP of GW NIC to eNB: 192.188.2.2>

	AMF GUMMEI (line 91)		AMF GUMMEI (line 91)

	amf:		amf:
	gummei:		gummei:
	plmn_id:		plmn_id:
	mcc: <eNB MCC: 208>		mcc: <eNB MCC: 208>
	mnc: <eNB MNC: 93>		mnc: <eNB MNC: 93>
	mme_gid: <eNB MME GID: 1>		mme_gid: <eNB MME GID: 1>
	mme_code: <eNB MME Code: 1>		mme_code: <eNB MME Code: 1>

	AMF TAI (line 130)		AMF TAI (line 130)

	amf:		amf:
	tai:		tai:
	plmn_id:		plmn_id:
	mcc: <eNB MCC: 208>		mcc: <eNB MCC: 208>
	mnc: <eNB MNC: 93>		mnc: <eNB MNC: 93>
	tac: <eNB TAC: 1>		tac: <eNB TAC: 1>

	==Add subscriber (UE)==		==Add subscriber (UE)==

Unknown user: /* Part D. Web User Interface */

2022-12-21T02:02:54Z

Part D. Web User Interface

← Older revision		Revision as of 02:02, 21 December 2022
Line 255:		Line 255:
	===Part D. Web User Interface===		===Part D. Web User Interface===

	Install Node.js ~~and~~ NPM		Install Node.js dan NPM

	sudo apt-get -y install curl		sudo apt-get -y install curl
Line 261:		Line 261:
	sudo apt-get -y install nodejs		sudo apt-get -y install nodejs

	Install ~~the dependencies to~~ run WebUI (~~first time~~)		Install dependency untuk run WebUI (pertama kali)

	cd webui		cd webui
Line 271:		Line 271:
	npm run dev		npm run dev

	~~Now the~~ web ~~server is running on~~ http://localhost:3000. ~~The default~~ username ~~and~~ password ~~are “admin” and “1423”~~.		Sekarang server web berjalan di http://localhost:3000. username dan password default adalah "admin" dan "1423".

	==Core Network Configuration==		==Core Network Configuration==

Unknown user: /* Run functions separately */

2022-12-21T01:58:48Z

Run functions separately

← Older revision		Revision as of 01:58, 21 December 2022
Line 229:		Line 229:
	* Kita dapat menggunakan argumen -f untuk menentukan config file yang akan digunakan.		* Kita dapat menggunakan argumen -f untuk menentukan config file yang akan digunakan.

	====~~Run functions separately~~====		====Fungsi 5GC di jalankan terpisah====

	~~We also provide~~ 5GC ~~functions running separately~~.		Sebetulnya fungsi 5GC dapat dijalankan secara terpisah.

	./free5gc-upfd		./free5gc-upfd
Line 239:		Line 239:
	./nextepc-pcrfd		./nextepc-pcrfd

	~~Note~~: ~~We also provide a reference for~~ 5GC ~~functions running in separate machines~~.		Catatan: kita juga dapat menjalankan fungsi 5GC yang di mesin terpisah.

	[Optional] Self-test		'''[Optional] Self-test'''
	~~We provide a~~ program ~~that checks whether the installation is correct~~. ~~After running the~~ wireshark, ~~select~~ loopback ~~interface~~, ~~and then~~ filter s1ap \|\| diameter \|\| gtpv2 \|\| gtp ~~and run~~ ./test/testngc~~. You can see the packets virtually created.~~
			Pengembang 5GC juga menyediakan program yang memeriksa apakah penginstalan sudah benar. Setelah menjalankan wireshark, pilih interface loopback, lalu filter s1ap \|\| diameter \|\| gtpv2 \|\| gtp dan jalankan,

			./test/testngc

			atau

	./test/testngc -f install/etc/free5gc/test/free5gc.testngc.conf		./test/testngc -f install/etc/free5gc/test/free5gc.testngc.conf

			Kita dapat melihat paket-paket dibuat secara virtual.

	===Part D. Web User Interface===		===Part D. Web User Interface===

Unknown user: /* Run in all-in-one mode */

2022-12-21T01:54:15Z

Run in all-in-one mode

← Older revision		Revision as of 01:54, 21 December 2022
Line 218:		Line 218:
	====Run in all-in-one mode====		====Run in all-in-one mode====

	~~The~~ daemon free5gc-ngcd ~~includes~~ AMF, SMF, UPF, HSS, ~~and~~ PCRF. ~~Thus~~, ~~instead of running all~~ 5 ~~daemons~~, ~~you can just run~~ free5gc-ngcd ~~in your~~ development environment.		Aplikasi (daemon) free5gc-ngcd termasuk di dalamnya AMF, SMF, UPF, HSS, dan PCRF. Jadi, daripada menjalankan semua 5 daemon, kita bisa menjalankan free5gc-ngcd di development environment kita.


	./free5gc-ngcd		./free5gc-ngcd

	~~While~~ running free5gc-ngcd		Saat running free5gc-ngcd
	~~All logs for~~ AMF, SMF, UPF, HSS, ~~and~~ PCRF ~~are written to~~ ./install/var/log/free5gc/free5gc.log.		* Semua log dari AMF, SMF, UPF, HSS, dan PCRF akan di tulis ke ./install/var/log/free5gc/free5gc.log.
	~~All settings are~~ managed ~~in one place for~~ ./install/etc/free5gc/free5gc.conf.		* Semua setting akan di managed dari satu file ./install/etc/free5gc/free5gc.conf.
	~~You can find the~~ log/conf ~~path at the beginning of the~~ running ~~screen~~.		* Kita akan melihat path log/conf di awal screen saat running.
	~~You can user~~ -f ~~argument to specify~~ config file ~~to be used~~.		* Kita dapat menggunakan argumen -f untuk menentukan config file yang akan digunakan.

	====Run functions separately====		====Run functions separately====

Unknown user: /* Instalasi */

2022-12-14T06:07:22Z

Instalasi

Show changes

Unknown user: /* USIM information (in this example) */

2022-12-14T05:54:53Z

USIM information (in this example)

← Older revision		Revision as of 05:54, 14 December 2022
Line 64:		Line 64:
	TAC: 1		TAC: 1

	===USIM ~~information~~ (~~in this example~~)===		===Informasi USIM (dalam contoh ini)===

	IMSI 208930000000003		IMSI 208930000000003