Mikrotik: OSPF Sederhana distribute default routing - Revision history

Onnowpurbo: /* Setup OSPF */

2019-01-02T01:08:20Z

Setup OSPF

← Older revision		Revision as of 01:08, 2 January 2019
Line 60:		Line 60:
	/routing ospf network add network=10.0.1.0/24 area=backbone		/routing ospf network add network=10.0.1.0/24 area=backbone
	/routing ospf network add network=10.1.1.0/30 area=area1		/routing ospf network add network=10.1.1.0/30 area=area1
			/routing ospf interface
			add interface=ether1 authentication=md5 authentication-key=$AP7i1 authentication-key-id=1
			/routing ospf interface
			add interface=ether2 authentication=md5 authentication-key=$AP7i1 authentication-key-id=1

	R2:		R2:
Line 67:		Line 71:
	/routing ospf network add network=10.0.1.0/24 area=backbone		/routing ospf network add network=10.0.1.0/24 area=backbone
	/routing ospf network add network=10.1.2.0/30 area=area2		/routing ospf network add network=10.1.2.0/30 area=area2
			/routing ospf interface
			add interface=ether1 authentication=md5 authentication-key=$AP7i1 authentication-key-id=1
			/routing ospf interface
			add interface=ether2 authentication=md5 authentication-key=$AP7i1 authentication-key-id=1


	/routing ospf instance set distribute-default=if-installed-as-type-1 numbers=0		/routing ospf instance set distribute-default=if-installed-as-type-1 numbers=0
Line 77:		Line 86:
	/routing ospf network add network=10.1.1.0/30 area=area1		/routing ospf network add network=10.1.1.0/30 area=area1
	/routing ospf network add network=192.168.1.0/24 area=area1		/routing ospf network add network=192.168.1.0/24 area=area1
			/routing ospf interface
			add interface=ether1 authentication=md5 authentication-key=$AP7i1 authentication-key-id=1

	R4 configuration:		R4 configuration:
Line 85:		Line 95:
	/routing ospf network add network=10.1.2.0/30 area=area2		/routing ospf network add network=10.1.2.0/30 area=area2
	/routing ospf network add network=192.168.2.0/24 area=area2		/routing ospf network add network=192.168.2.0/24 area=area2
			/routing ospf interface
			add interface=ether1 authentication=md5 authentication-key=$AP7i1 authentication-key-id=1

	==Cek route==		==Cek route==

Onnowpurbo at 00:53, 2 January 2019

2019-01-02T00:53:57Z

Show changes

Onnowpurbo: /* Pranala Menarik */

2018-12-27T22:25:03Z

Pranala Menarik

← Older revision		Revision as of 22:25, 27 December 2018
Line 91:		Line 91:
	==Pranala Menarik==		==Pranala Menarik==

			* [[TCP/IP: Advanced Routing]]
			* [[Quagga]]
	* [[Mikrotik]]		* [[Mikrotik]]
			* [[Cisco]]
			* [[Juniper]]
			* [[BIRD: Routing]]
			* [[IPv6]]

Onnowpurbo: /* Tambahan untuk distribute default routing */

2018-11-13T08:20:31Z

Tambahan untuk distribute default routing

← Older revision		Revision as of 08:20, 13 November 2018
Line 47:		Line 47:
	R1:		R1:

	~~/interface bridge~~
	~~add name=Loopback~~
	/routing ospf instance		/routing ospf instance
	set [ find default=yes ] distribute-default=always-as-type-1 \		set [ find default=yes ] distribute-default=always-as-type-1 \
Line 66:		Line 64:
	set [ find default=yes ] router-id=10.10.1.2		set [ find default=yes ] router-id=10.10.1.2
	/ip dns set servers=8.8.8.8		/ip dns set servers=8.8.8.8



	==Verify==		==Verify==

Onnowpurbo: Created page with "thumb Router1: /ip address add address=10.10.1.1/30 interface=ether1 /ip address add address=10.10.1.5/30 interface=ether2 /ip dhcp-c..."

2018-11-13T08:16:14Z

Created page with "center|400px|thumb Router1: /ip address add address=10.10.1.1/30 interface=ether1 /ip address add address=10.10.1.5/30 interface=ether2 /ip dhcp-c..."

New page

[[File:Image6005.gif|center|400px|thumb]]

Router1:

/ip address add address=10.10.1.1/30 interface=ether1
/ip address add address=10.10.1.5/30 interface=ether2
/ip dhcp-client add interface=ether3 disabled=no
/ip firewall nat add chain=srcnat out-interface=ether3 action=masquareade
/ip firewall nat print
/routing ospf network add network=10.10.1.0/24 area=backbone

Router2:

/ip address add address=10.10.1.6/30 interface=ether1
/ip address add address=10.10.1.9/30 interface=ether2
/ip address add address=172.16.1.1/16 interface=ether3
/routing ospf network add network=172.16.0.0/16 area=backbone
/routing ospf network add network=10.10.1.0/24 area=backbone

Router3:

/ip address add address=10.10.1.2/30 interface=ether1
/ip address add address=10.10.1.10/30 interface=ether2
/ip address add address=192.168.1.1/24 interface=ether3
/routing ospf network add network=192.168.1.0/24 area=backbone
/routing ospf network add network=10.10.1.0/24 area=backbone

Cek

/routing ospf instance print

Flags: X - disabled
0 name="default" router-id=0.0.0.0 distribute-default=never
redistribute-connected=as-type-1 redistribute-static=as-type-1
redistribute-rip=no redistribute-bgp=no redistribute-other-ospf=no
metric-default=1 metric-connected=20 metric-static=20 metric-rip=20
metric-bgp=auto metric-other-ospf=auto in-filter=ospf-in
out-filter=ospf-out

Catatan: Ingat bahwa backbone area-id adalah 0.0.0.0.

==Tambahan untuk distribute default routing==

R1:

/interface bridge
add name=Loopback
/routing ospf instance
set [ find default=yes ] distribute-default=always-as-type-1 \
redistribute-connected=as-type-1 router-id=10.10.1.1
/ip dns set servers=8.8.8.8

R2:

/routing ospf instance
set [ find default=yes ] router-id=10.10.1.6
/ip dns set servers=8.8.8.8

R3:

/routing ospf instance
set [ find default=yes ] router-id=10.10.1.2
/ip dns set servers=8.8.8.8

==Verify==

Cek

R1:

/routing ospf interface print
/routing ospf neighbor print
/ip route print

Lakukan yang sama untuk R2, R3

==Referensi==

* https://wiki.mikrotik.com/wiki/Manual:OSPF-examples

==Pranala Menarik==

* [[Mikrotik]]