Nginx: instalasi RTMP - Revision history

Onnowpurbo at 01:29, 31 August 2014

2014-08-31T01:29:30Z

← Older revision		Revision as of 01:29, 31 August 2014
Line 35:		Line 35:
	Now a bit of info about nginx (pronounced "engine-X"). nginx is an extremely lightweight web server, but someone wrote a RTMP module for it, so it can host RTMP streams too. However, to add the RTMP module, we have to compile nginx from source rather than use the apt package. Don't worry, it's really easy. Just follow these instructions. :)		Now a bit of info about nginx (pronounced "engine-X"). nginx is an extremely lightweight web server, but someone wrote a RTMP module for it, so it can host RTMP streams too. However, to add the RTMP module, we have to compile nginx from source rather than use the apt package. Don't worry, it's really easy. Just follow these instructions. :)

	~~Downlooad~~ nginx source code		Download nginx source code

			cd /usr/local/src
	wget http://nginx.org/download/nginx-1.7.4.tar.gz		wget http://nginx.org/download/nginx-1.7.4.tar.gz
	wget http://nginx.org/download/nginx-1.6.1.tar.gz		wget http://nginx.org/download/nginx-1.6.1.tar.gz
			wget https://github.com/arut/nginx-rtmp-module/archive/master.zip

	~~Download RTMP module source code dari git~~		buka

	~~wget https://github.com/arut/nginx-rtmp-module/archive/master.zip~~

	~~Unpack~~/unzip ~~them both, and enter the nginx directory:~~		cd /usr/loca/src
			tar -zxvf nginx-1.6.1.tar.gz
			unzip master.zip

	~~$ tar -zxvf nginx-1.5.2.tar.gz~~
	~~$ unzip master.zip~~
	~~$ cd nginx-1.5.2~~

	~~Now we build nginx:~~		Compile

	$ ./configure --with-http_ssl_module --add-module=../nginx-rtmp-module-master		cd /usr/local/src/nginx-1.6.1
	$ make		./configure --with-http_ssl_module --add-module=../nginx-rtmp-module-master
	$ sudo make install		make
			sudo make install

	And nginx is installed! By default it installs to /usr/local/nginx, so to start the server run the following command:		And nginx is installed! By default it installs to /usr/local/nginx, so to start the server run the following command:

Onnowpurbo at 23:23, 25 August 2014

2014-08-25T23:23:14Z

← Older revision		Revision as of 23:23, 25 August 2014
Line 35:		Line 35:
	Now a bit of info about nginx (pronounced "engine-X"). nginx is an extremely lightweight web server, but someone wrote a RTMP module for it, so it can host RTMP streams too. However, to add the RTMP module, we have to compile nginx from source rather than use the apt package. Don't worry, it's really easy. Just follow these instructions. :)		Now a bit of info about nginx (pronounced "engine-X"). nginx is an extremely lightweight web server, but someone wrote a RTMP module for it, so it can host RTMP streams too. However, to add the RTMP module, we have to compile nginx from source rather than use the apt package. Don't worry, it's really easy. Just follow these instructions. :)

	~~From your home directory, download the~~ nginx source code:		Downlooad nginx source code

	$ wget http://nginx.org/download/nginx-1.5.2.tar.gz		wget http://nginx.org/download/nginx-1.7.4.tar.gz
			wget http://nginx.org/download/nginx-1.6.1.tar.gz

	~~As of this writing, the latest stable version of nginx is 1.5.2. You can find the latest version on the nginx download page.~~		Download RTMP module source code dari git

	~~Next, get the RTMP module source code from git:~~		wget https://github.com/arut/nginx-rtmp-module/archive/master.zip

	$ wget https://github.com/arut/nginx-rtmp-module/archive/master.zip

	Unpack/unzip them both, and enter the nginx directory:		Unpack/unzip them both, and enter the nginx directory:

Onnowpurbo at 02:10, 25 August 2014

2014-08-25T02:10:19Z

← Older revision		Revision as of 02:10, 25 August 2014
Line 2:		Line 2:


	Most people who stream enjoy using services such as Twitch.tv or Ustream to deliver video to viewers, and that works well enough. But sometimes you want some more control over your stream, or you want other people to be able to stream to you, or you want to stream to multiple places, or any number of things that requires you to have access to an actual RTMP stream from an RTMP server~~. This guide will cover the very basics of setting up a simple RTMP server on a~~ Linux ~~computer~~. ~~Don't worry~~, ~~it's not too complicated~~, ~~but having familiarity with Linux will certainly help~~.		Tulisan ini akan membahas konfigurasi dasar RTMP server di Linux. Dengan kemampuan tersebut kita dapat lebih mengontrol stream kita, membuka kemungkinan orang untuk men-stream kita, kita ingin menstream ke banyak lokasi dll.

	~~A couple things you can do with your own~~ RTMP server ~~that you might be interested in~~:		Beberapa hal yang dapat dilakukan oleh RTMP server yang mungkin kita inginkan:

			* Stream ke banyak kanal
			* Import stream orang lain ke stream kita.

			Langkah yang perlu dilakukan ..


			==Step 1: Siapkan Box Server==

	~~Stream to multiple external channels~~
	~~Import other people's streams to incorporate for your own purposes (I use it in my casts for multiple camera angles, like in this video I did of a Tribes Ascend broadcast with multiple camera angles)~~

	~~Alright, so how do you do these kinds of things?~~

	~~Step 1: Get a Server Box~~

	Believe it or not, RTMP is actually extremely light on system resources. Essentially it just grabs data from the input and forwards it on to the output, simple data transfer. Don't believe me? My RTMP server for a long time was a Raspberry Pi, a $35 mini-computer, sitting under my desk, and it was capable of hosting at least 3 simultaneous streams, and I never even stressed it to see how many more it could handle. So I assure you, even a cheap old box would suffice.		Believe it or not, RTMP is actually extremely light on system resources. Essentially it just grabs data from the input and forwards it on to the output, simple data transfer. Don't believe me? My RTMP server for a long time was a Raspberry Pi, a $35 mini-computer, sitting under my desk, and it was capable of hosting at least 3 simultaneous streams, and I never even stressed it to see how many more it could handle. So I assure you, even a cheap old box would suffice.
Line 23:		Line 27:
	If you are hosting your server in your home, you will have to forward TCP port 1935 to the box...this varies by router, so look up how to set up port forwarding for your router. Also, I recommend using a service like DynDNS to overcome dynamic IP issues that come up with residential hosting.		If you are hosting your server in your home, you will have to forward TCP port 1935 to the box...this varies by router, so look up how to set up port forwarding for your router. Also, I recommend using a service like DynDNS to overcome dynamic IP issues that come up with residential hosting.

	Step 2: Installing nginx with RTMP module		==Step 2: Installing nginx with RTMP module==

	Log into your box, and make sure you have the necessary tools to build nginx using the following command:		Log into your box, and make sure you have the necessary tools to build nginx using the following command:
Line 59:		Line 63:
	And to test to make sure nginx is running, point your browser to http://<your server ip>/ and you should get the "Welcome to nginx!" page.		And to test to make sure nginx is running, point your browser to http://<your server ip>/ and you should get the "Welcome to nginx!" page.

	Step 3: Configuring nginx to use RTMP		==Step 3: Configuring nginx to use RTMP==

	Open your config file, located by default at /usr/local/nginx/conf/nginx.conf and add the following at the very end of the file:		Open your config file, located by default at /usr/local/nginx/conf/nginx.conf and add the following at the very end of the file:
Line 65:		Line 69:
	Code \| Analyze		Code \| Analyze

	rtmp {		rtmp {
	server {		server {
	listen 1935;		listen 1935;
	chunk_size 4096;		chunk_size 4096;

	application live {		application live {
	live on;		live on;
	record off;		record off;
	}		}
	}		}
	}		}

	This is an extremely basic configuration with a "live" application that simply forwards the RTMP stream on to whoever requests it. You can play with it some more later. Here's the whole configuration guide, which shows you how to forward streams to other places (such as Twitch), save recordings of uploads, output stats, etc.		This is an extremely basic configuration with a "live" application that simply forwards the RTMP stream on to whoever requests it. You can play with it some more later. Here's the whole configuration guide, which shows you how to forward streams to other places (such as Twitch), save recordings of uploads, output stats, etc.
Line 84:		Line 88:
	$ sudo /usr/local/nginx/sbin/nginx		$ sudo /usr/local/nginx/sbin/nginx

	Step 4: Testing!		==Step 4: Testing!==

	Your server should now be ready to accept RTMP streams! Let's try it out.		Your server should now be ready to accept RTMP streams! Let's try it out.

Onnowpurbo: New page: Sumber: https://obsproject.com/forum/resources/how-to-set-up-your-own-private-rtmp-server-using-nginx.50/ Most people who stream enjoy using services such as Twitch.tv or Ustream to deli...

2014-08-24T01:46:26Z

New page: Sumber: https://obsproject.com/forum/resources/how-to-set-up-your-own-private-rtmp-server-using-nginx.50/ Most people who stream enjoy using services such as Twitch.tv or Ustream to deli...

New page

Sumber: https://obsproject.com/forum/resources/how-to-set-up-your-own-private-rtmp-server-using-nginx.50/

Most people who stream enjoy using services such as Twitch.tv or Ustream to deliver video to viewers, and that works well enough. But sometimes you want some more control over your stream, or you want other people to be able to stream to you, or you want to stream to multiple places, or any number of things that requires you to have access to an actual RTMP stream from an RTMP server. This guide will cover the very basics of setting up a simple RTMP server on a Linux computer. Don't worry, it's not too complicated, but having familiarity with Linux will certainly help.

A couple things you can do with your own RTMP server that you might be interested in:

Stream to multiple external channels
Import other people's streams to incorporate for your own purposes (I use it in my casts for multiple camera angles, like in this video I did of a Tribes Ascend broadcast with multiple camera angles)

Alright, so how do you do these kinds of things?

Step 1: Get a Server Box

Believe it or not, RTMP is actually extremely light on system resources. Essentially it just grabs data from the input and forwards it on to the output, simple data transfer. Don't believe me? My RTMP server for a long time was a Raspberry Pi, a $35 mini-computer, sitting under my desk, and it was capable of hosting at least 3 simultaneous streams, and I never even stressed it to see how many more it could handle. So I assure you, even a cheap old box would suffice.

If you don't have your own box, a VPS can also work. I recommend Linode as a provider, if you can afford it. This is what I am currently using, and thus far it has worked out well. Just make sure you have enough bandwidth...remember that bandwidth usage will be (the size of a stream) * (the number of people uploading + the number of people downloading). So when I have 2 streamers stream to my server, and I download both of them, I can chew up 10GB of bandwidth in 2 hours.

I recommend using Ubuntu for the server software for the sake of ease, but you can obviously use whatever you want. As long as you get the dependencies for nginx somewhere besides apt, you can follow this guide just fine.

Note to Windows users: This guide focuses on using Linux. If you want to use Windows, you can find Windows binaries for nginx with the RTMP module already included here: http://nginx-win.ecsds.eu/

If you are hosting your server in your home, you will have to forward TCP port 1935 to the box...this varies by router, so look up how to set up port forwarding for your router. Also, I recommend using a service like DynDNS to overcome dynamic IP issues that come up with residential hosting.

Step 2: Installing nginx with RTMP module

Log into your box, and make sure you have the necessary tools to build nginx using the following command:

$ sudo apt-get install build-essential libpcre3 libpcre3-dev libssl-dev

Now a bit of info about nginx (pronounced "engine-X"). nginx is an extremely lightweight web server, but someone wrote a RTMP module for it, so it can host RTMP streams too. However, to add the RTMP module, we have to compile nginx from source rather than use the apt package. Don't worry, it's really easy. Just follow these instructions. :)

From your home directory, download the nginx source code:

$ wget http://nginx.org/download/nginx-1.5.2.tar.gz

As of this writing, the latest stable version of nginx is 1.5.2. You can find the latest version on the nginx download page.

Next, get the RTMP module source code from git:

$ wget https://github.com/arut/nginx-rtmp-module/archive/master.zip

Unpack/unzip them both, and enter the nginx directory:

$ tar -zxvf nginx-1.5.2.tar.gz
$ unzip master.zip
$ cd nginx-1.5.2

Now we build nginx:

$ ./configure --with-http_ssl_module --add-module=../nginx-rtmp-module-master
$ make
$ sudo make install

And nginx is installed! By default it installs to /usr/local/nginx, so to start the server run the following command:

$ sudo /usr/local/nginx/sbin/nginx

And to test to make sure nginx is running, point your browser to http://<your server ip>/ and you should get the "Welcome to nginx!" page.

Step 3: Configuring nginx to use RTMP

Open your config file, located by default at /usr/local/nginx/conf/nginx.conf and add the following at the very end of the file:

Code | Analyze

rtmp {
server {
listen 1935;
chunk_size 4096;

application live {
live on;
record off;
}
}
}

This is an extremely basic configuration with a "live" application that simply forwards the RTMP stream on to whoever requests it. You can play with it some more later. Here's the whole configuration guide, which shows you how to forward streams to other places (such as Twitch), save recordings of uploads, output stats, etc.

Restart nginx with:

$ sudo /usr/local/nginx/sbin/nginx -s stop
$ sudo /usr/local/nginx/sbin/nginx

Step 4: Testing!

Your server should now be ready to accept RTMP streams! Let's try it out.

Create a new profile in OBS, and change your Broadcast Settings thusly:

Streaming Service: Custom
Server: rtmp://<your server ip>/live
Play Path/Stream Key: test

You may be wondering where that play path "test" came from. Well, we just made it up, just now. You can basically make up any play path and stream to it, and put that path into an RTMP player, and it will play back. For simple purposes, authentication isn't necessary in my experience. However, authentication IS supported...instructions coming soon!

You should now be able to start streaming to your server. If you hit "Start Streaming" and don't get an error from OBS, that's a good sign.

So how do you watch it? Personally, I have been using vMix to play back RTMP streams and incorporate them into my own stream. If you just want to play back the stream that's being uploaded, you can do so with VLC 2.1.0 (which, as of this writing, is in pre-release, and you can get from the nightlies page). Just Open a Newtork Stream and enter in rtmp://<your server ip>/live/test as the URL. If it all worked right, then you should now be seeing your stream in VLC!

You now have a working RTMP server! Congrats!

What now?

OBS currently doesn't have a way (yet) to import RTMP streams directly. You can capture a VLC window, I suppose, with Window Capture. Once VLC 2.1.0 is released, Faruton will be able to add RTMP support to his video source plugin.

You can also use your RTMP server to forward to other streaming services and channels! Underneath the "record off;" line in your nginx.conf, add the following:

push rtmp://<other streaming service rtmp url>/<stream key>

And any stream streamed to that application will be forwarded on to the other service, as well as being served up from the server! You can add multiple "pushes" to forward the stream to multiple locations.