Onnowpurbo: New page: 1. CASE PRINCIPLE We will test in this third example a medium difficulty level environment where two routers (Cisco 3750 & Quagga B) are linked together with two OPSF areas, one OSPF area...

2012-05-01T07:24:00Z

New page: 1. CASE PRINCIPLE We will test in this third example a medium difficulty level environment where two routers (Cisco 3750 & Quagga B) are linked together with two OPSF areas, one OSPF area...

New page

1. CASE PRINCIPLE

We will test in this third example a medium difficulty level environment where two routers (Cisco 3750 & Quagga B) are linked together with two OPSF areas, one OSPF area is tagged as stub area.

The Quagga B router and the Cisco 2651 are located in a stub area. They have OPSF intra (O) and inter-area routes (OIA) in their routing tables but no external OSPF route. To route these external OPSF networks like 10.200.1.1 (see next paragraph), there is a default OSPF route to the border router (Quagga A router) on the routers inside area 1.
Quagga A is a border router because it is in area 0 or backbone area and in area 1.

For the purpose of our case study, the 10.200.1.1 static route is redistributed into OSPF on the Quagga A router to "artificially" create an external OPSF network tagged as OE2. Because of the stub area, this network should not be propagated on the Quagga B router and the Cisco 2651.

2. PICTURE

quagga cisco case study opsf advanced 3750 2651 Functionalities tested:

(click on the web links to have more details about a protocol)

Interface settings
OSPF - backbone area
OSPF - multi area
OSPF - stub area
Static routing
Redistribution - static to OSPF
Telnet access

3. CONFIGURATIONS

You must set your Linux system correctly to launch Quagga successfully.
See the Quagga tutorial for help about this.
LINUX CONFIGURATIONS

Check that the zebra and ospfd daemons are activated:

#vim /etc/quagga/daemons
zebra=yes
bgpd=no
ospfd=yes
ospf6d=no
ripd=no
ripngd=no
isisd=no

If you changed your daemons file, restart the quagga service:

#vim /etc/init.d/quagga restart
Stopping Quagga daemons (prio:0): ospfd zebra (bgpd) (ripd) (ripngd) (ospf6= d) (isisd).
Removing all routes made by zebra.
Nothing to flush.
Loading capability module if not yet done.
Starting Quagga daemons (prio:10): zebra ospfd.

Set the Quagga A hostname in the /etc/quagga/vtysh.conf file:

#vim /etc/quagga/vtysh.conf
!
! Sample
!
! service integrated-vtysh-config
hostname Quagga_A
username root nopassword
!

Set the Quagga B hostname in the /etc/quagga/vtysh.conf file:

#vim /etc/quagga/vtysh.conf
!
! Sample
!
! service integrated-vtysh-config
hostname Quagga_B
username root nopassword
!

Don't forget to activate the ip forwarding on the Quagga A router!
It is not necessary to activate ip forwarding on the Quagga B router because it has only one network interface.

ROUTERS CONFIGURATIONS

CISCO ROUTER 2651 IOS: 12.2-23a QUAGGA ROUTER A 0.99.6
interface FastEthernet0/1
ip address 10.1.3.2 255.255.255.0
no shutdown interface eth0
ip address 10.1.3.1/24
link-detect
interface FastEthernet0/0
ip address 10.1.4.2 255.255.255.0
no shutdown interface eth1
ip address 10.1.1.1/24
link-detect
interface Loopback 1
ip address 10.200.1.3 255.255.255.255
interface lo
ip address 10.200.1.2/32
link-detect
hostname Cisco-2651
ip route 10.200.1.1/32 10.1.1.2
router ospf 1
area 1 stub
network 10.1.3.0 0.0.0.255 area 1
network 10.1.4.0 0.0.0.255 area 1
network 10.200.1.3 0.0.0.0 area 1 router ospf
area 1 stub
network 10.1.3.0/24 area 1
network 10.1.1.0/24 area 0
network 10.200.1.2/32 area 0
line vty 0 4
no login
line vty
no login
enable secret password enable password password

CISCO SWITCH L3 3750 IOS: 12.2-25.SEE2
QUAGGA ROUTER B 0.99.6
interface vlan 1
ip address 10.1.1.2 255.255.255.0
no shutdown interface eth0
ip address 10.1.4.1/24
link-detect
interface Loopback 1
ip address 10.200.1.1 255.255.255.255
interface lo
ip address 10.200.1.4/32
link-detect
hostname 3750_L3
router ospf 1

network 10.1.1.0 0.0.0.255 area 0
router ospf
area 1 stub
network 10.1.4.0/24 area 1
network 10.200.1.4/32 area 1
line vty 0 4
no login
line vty 0 4
no login
enable secret password
enable password password

ip routing
ip multicast-routing distributed
SEE THE ENTIRE CONFIGURATION OF THE DEVICES:

Quagga A
Quagga B
Cisco 2651
Cisco 3750 L3

4. SHOW COMMANDS

CISCO 3750 L3 QUAGGA A ROUTER CISCO 2651 QUAGGA B ROUTER
CISCO 3750 LAYER 3

3750_L3##show interface vlan 1

Vlan1 is up, line protocol is up
Hardware is EtherSVI, address is 0011.2233.4444 (bia 0011.2233.4444)
Internet address is 10.1.1.2/24
MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:00:00, output 00:00:00, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
2120 packets input, 159981 bytes, 0 no buffer
Received 0 broadcasts (57 IP multicast)
0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
1425 packets output, 139335 bytes, 0 underruns
0 output errors, 0 interface resets
0 output buffer failures, 0 output buffers swapped out
3750_L3#show ip route

Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static route

Gateway of last resort is not set

10.0.0.0/8 is variably subnetted, 7 subnets, 2 masks
C 10.200.1.1/32 is directly connected, Loopback1
C 10.1.1.0/24 is directly connected, Vlan1
O 10.200.1.2/32 [110/11] via 10.1.1.1, 01:40:19, Vlan1
O IA 10.1.3.0/24 [110/11] via 10.1.1.1, 01:40:19, Vlan1
O IA 10.1.4.0/24 [110/12] via 10.1.1.1, 01:40:19, Vlan1
O IA 10.200.1.3/32 [110/12] via 10.1.1.1, 01:40:19, Vlan1
O IA 10.200.1.4/32 [110/22] via 10.1.1.1, 01:40:19, Vlan1
3750_L3#show ip ospf interface

Vlan1 is up, line protocol is up
Internet Address 10.1.1.2/24, Area 0
Process ID 1, Router ID 10.200.1.1, Network Type BROADCAST, Cost: 1
Transmit Delay is 1 sec, State BDR, Priority 1
Designated Router (ID) 10.200.1.2, Interface address 10.1.1.1
Backup Designated router (ID) 10.200.1.1, Interface address 10.1.1.2
Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
oob-resync timeout 40
Hello due in 00:00:07
Supports Link-local Signaling (LLS)
Index 1/1, flood queue length 0
Next 0x0(0)/0x0(0)
Last flood scan length is 1, maximum is 1
Last flood scan time is 0 msec, maximum is 0 msec
Neighbor Count is 1, Adjacent neighbor count is 1
Adjacent with neighbor 10.200.1.2 (Designated Router)
Suppress hello for 0 neighbor(s)
3750_L3#show ip ospf database

OSPF Router with ID (10.200.1.1) (Process ID 1)

Router Link States (Area 0)

Link ID ADV Router Age Seq# Checksum Link count
10.200.1.1 10.200.1.1 117 0x8000001D 0x000A48 1
10.200.1.2 10.200.1.2 731 0x8000001D 0x000A48 2

Net Link States (Area 0)

Link ID ADV Router Age Seq# Checksum
10.1.1.1 10.200.1.2 731 0x80000004 0x00C009

Summary Net Link States (Area 0)

Link ID ADV Router Age Seq# Checksum
10.1.3.0 10.200.1.2 1543 0x80000008 0x005E0A
10.1.4.0 10.200.1.2 743 0x80000009 0x005B0A
10.200.1.3 10.200.1.2 623 0x80000009 0x00019C
10.200.1.4 10.200.1.2 923 0x8000000A 0x005938

Type-5 AS External Link States

Link ID ADV Router Age Seq# Checksum Tag
10.200.1.1 10.200.1.2 773 0x8000000 0x008A73 0
3750_L3#show ip ospf neighbor

Neighbor ID Pri State Dead Time Address Interface
10.200.1.2 1 FULL/DR 00:00:34 10.1.1.1 Vlan1

Top of the page Show Commands Menu

QUAGGA A ROUTER

Quagga_A#show interface description

Interface Status Protocol Description
eth0 up up
eth1 up up
lo up up
Quagga_A#show interface eth0

Interface eth0 is up, line protocol is up
index 2 metric 1 mtu 1500
flags: <UP,BROADCAST,RUNNING,MULTICAST>
HWaddr: 00:02:11:22:33:99
inet 10.1.3.1/24 broadcast 10.1.3.255
inet6 fe80::201:66ff:1122:3399/64
2598 input packets (0 multicast), 213456 bytes, 0 dropped
0 input errors, 0 length, 0 overrun, 0 CRC, 0 frame
0 fifo, 0 missed
2491 output packets, 229815 bytes, 0 dropped
0 output errors, 0 aborted, 0 carrier, 0 fifo, 0 heartbeat
0 window, 0 collisions
Quagga_A (Linux level)#route -n

Kernel IP routing table
Destination Gateway Genmask Indic Metric Ref Use Iface
10.200.1.1 10.1.1.2 255.255.255.255 UGH 0 0 0 eth1
10.200.1.3 10.1.3.2 255.255.255.255 UGH 11 0 0 eth0
10.200.1.4 10.1.3.2 255.255.255.255 UGH 21 0 0 eth0
10.1.4.0 10.1.3.2 255.255.255.0 UG 11 0 0 eth0
10.1.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1
10.1.3.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
Quagga_A#show ip route

Codes: K - kernel route, C - connected, S - static, R - RIP, O - OSPF,
I - ISIS, B - BGP, > - selected route, * - FIB route

C>* 127.0.0.0/8 is directly connected, lo
C>* 10.200.1.2/32 is directly connected, lo
C>* 10.1.3.0/24 is directly connected, eth0
C>* 10.1.1.0/24 is directly connected, eth1
S>* 10.200.1.1/32 [1/0] via 10.1.1.2, eth1
O 10.1.1.0/24 [110/10] is directly connected, eth1, 03:30:30
O 10.1.3.0/24 [110/10] is directly connected, eth0, 03:30:39
O 10.200.1.2/32 [110/10] is directly connected, lo, 03:30:39
O>* 10.1.4.0/24 [110/11] via 10.1.3.2, eth0, 03:30:29
O>* 10.200.1.3/32 [110/11] via 10.1.3.2, eth0, 03:30:29
O>* 10.200.1.4/32 [110/21] via 10.1.3.2, eth0, 03:30:29
Quagga_A#show ip ospf interface

eth0 is up
ifindex 2, MTU 1500 bytes, BW 0 Kbit <UP,BROADCAST,RUNNING,MULTICAST>
Internet Address 10.1.3.1/24, Broadcast 10.1.3.255, Area 0.0.0.1 [Stub]
MTU mismatch detection:enabled
Router ID 10.200.1.2, Network Type BROADCAST, Cost: 10
Transmit Delay is 1 sec, State Backup, Priority 1
Designated Router (ID) 10.1.4.2, Interface Address 10.1.3.2
Backup Designated Router (ID) 10.200.1.2, Interface Address 10.1.3.1
Multicast group memberships: OSPFAllRouters OSPFDesignatedRouters
Timer intervals configured, Hello 10s, Dead 40s, Wait 40s, Retransmit 5
Hello due in 6.220s
Neighbor Count is 1, Adjacent neighbor count is 1
eth1 is up
ifindex 3, MTU 1500 bytes, BW 0 Kbit <UP,BROADCAST,RUNNING,MULTICAST>
Internet Address 10.1.1.1/24, Broadcast 10.1.1.255, Area 0.0.0.0
MTU mismatch detection:enabled
Router ID 10.200.1.2, Network Type BROADCAST, Cost: 10
Transmit Delay is 1 sec, State DR, Priority 1
Designated Router (ID) 10.200.1.2, Interface Address 10.1.1.1
Backup Designated Router (ID) 10.200.1.1, Interface Address 10.1.1.2
Multicast group memberships: OSPFAllRouters OSPFDesignatedRouters
Timer intervals configured, Hello 10s, Dead 40s, Wait 40s, Retransmit 5
Hello due in 5.460s
Neighbor Count is 1, Adjacent neighbor count is 1
lo is up
ifindex 1, MTU 16436 bytes, BW 0 Kbit <UP,LOOPBACK,RUNNING>
Internet Address 10.200.1.2/32, Area 0.0.0.0
MTU mismatch detection:enabled
Router ID 10.200.1.2, Network Type LOOPBACK, Cost: 10
Transmit Delay is 1 sec, State Loopback, Priority 1
No designated router on this network
No backup designated router on this network
Multicast group memberships: <None>
Timer intervals configured, Hello 10s, Dead 40s, Wait 40s, Retransmit 5
Hello due in inactive
Neighbor Count is 0, Adjacent neighbor count is 0
Quagga_A#show ip ospf database

OSPF Router with ID (10.200.1.2)

Router Link States (Area 0.0.0.0)

Link ID ADV Router Age Seq# CkSum Link count
10.200.1.1 10.200.1.1 1496 0x8000001c 0x0c47 1
10.200.1.2 10.200.1.2 67 0x80000010 0xdfa2 2

Net Link States (Area 0.0.0.0)

Link ID ADV Router Age Seq# CkSum
10.1.1.1 10.200.1.2 67 0x80000004 0xc009

Summary Link States (Area 0.0.0.0)

Link ID ADV Router Age Seq# CkSum Route
10.1.3.0 10.200.1.2 909 0x80000008 0x5e0a 10.1.3.0/24
10.1.4.0 10.200.1.2 79 0x80000009 0x5b0a 10.1.4.0/24
10.200.1.3 10.200.1.2 1790 0x80000008 0x039b 10.200.1.3/32
10.200.1.4 10.200.1.2 259 0x8000000a 0x5938 10.200.1.4/32

Router Link States (Area 0.0.0.1 [Stub])

Link ID ADV Router Age Seq# CkSum Link count
10.1.4.2 10.1.4.2 736 0x80000010 0x8742 3
10.200.1.2 10.200.1.2 59 0x8000000c 0xe98b 1
10.200.1.4 10.200.1.4 470 0x8000000a 0x5927 2

Net Link States (Area 0.0.0.1 [Stub])

Link ID ADV Router Age Seq# CkSum
10.1.3.2 10.1.4.2 736 0x80000007 0xea43
10.1.4.2 10.1.4.2 736 0x80000008 0xf930

Summary Link States (Area 0.0.0.1 [Stub])

Link ID ADV Router Age Seq# CkSum Route
0.0.0.0 10.200.1.2 179 0x80000009 0xcfb0 0.0.0.0/0
10.1.1.0 10.200.1.2 1309 0x80000007 0x94d8 10.1.1.0/24
10.200.1.2 10.200.1.2 309 0x80000009 0x1f82 10.200.1.2/32

AS External Link States

10.200.1.1 10.200.1.2 109 0x80000009 0x8a73 E2 10.200.1.1/32 [0x0]
Quagga_A#show ip border-routers

============ OSPF router routing table =============

Quagga_A#show ip neighbor

Neighbor ID Pri State Dead Time Address Interface RXmtL RqstL DBsmL
10.200.1. 1 Full/Backup 32.136s 10.1.1.2 eth1:10.1.1.1 1 0 0
10.1.4.2 1 Full/DR 36.102s 10.1.3.2 eth0:10.1.3.1 0 0 0
Quagga_A#show ip ospf route

============ OSPF network routing table ============
N 10.1.1.0/24 [10] area: 0.0.0.0
directly attached to eth1
N 10.1.3.0/24 [10] area: 0.0.0.1
directly attached to eth0
N 10.1.4.0/24 [11] area: 0.0.0.1
via 10.1.3.2, eth0
N 10.200.1.2/32 [10] area: 0.0.0.0
directly attached to lo
N 10.200.1.3/32 [11] area: 0.0.0.1
via 10.1.3.2, eth0
N 10.200.1.4/32 [21] area: 0.0.0.1
via 10.1.3.2, eth0

============ OSPF router routing table =============

============ OSPF external routing table ===========
Quagga_A#show ip forwarding

IP forwarding is on
See explanation about Linux IP forwarding.

Top of the page Show Commands Menu

CISCO 2651

Cisco_2651#show ip interface brief

Interface IP-Address OK? Method Status Protocol
FastEthernet0/0 10.1.4.2 YES NVRAM up up
FastEthernet0/1 10.1.3.2 YES NVRAM up up
Loopback1 10.200.1.3 YES manual up up
Cisco-2651#show interface FastEthernet 0/0

FastEthernet0/0 is up, line protocol is up
Hardware is AmdFE, address is 0011.2211.3345 (bia 0011.2211.3345)
Internet address is 10.1.4.2/24
MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Full-duplex, 100Mb/s, 100BaseTX/FX
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:01:20, output 00:00:09, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
477 packets input, 46396 bytes
Received 303 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 watchdog
0 input packets with dribble condition detected
603 packets output, 58014 bytes, 0 underruns
0 output errors, 0 collisions, 1 interface resets
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier
0 output buffer failures, 0 output buffers swapped out
Cisco-2651#show ip route

Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static route

Gateway of last resort is 10.1.3.1 to network 0.0.0.0

10.0.0.0/8 is variably subnetted, 6 subnets, 2 masks
C 10.1.4.0/24 is directly connected, FastEthernet0/0
C 10.1.3.0/24 is directly connected, FastEthernet0/1
C 10.200.1.3/32 is directly connected, Loopback1
O 10.200.1.4/32 [110/11] via 10.1.4.1, 02:06:38, FastEthernet0/0
O IA 10.1.1.0/24 [110/11] via 10.1.3.1, 02:06:38, FastEthernet0/1
O IA 10.200.1.2/32 [110/11] via 10.1.3.1, 02:06:38, FastEthernet0/1
O*IA 0.0.0.0/0 [110/2] via 10.1.3.1, 02:06:40, FastEthernet0/1
Cisco-2651#show ip ospf border-routers

OSPF Process 1 internal Routing Table

Codes: i - Intra-area route, I - Inter-area route

i 10.200.1.2 [1] via 10.1.3.1, FastEthernet0/1, ABR, Area 1, SPF 12
Cisco-2651#show ip ospf database

OSPF Router with ID (10.1.4.2) (Process ID 1)

Router Link States (Area 1)

Link ID ADV Router Age Seq# Checksum Link count
10.1.4.2 10.1.4.2 1800 0x8000000D 0x008D3F 3
10.200.1.2 10.200.1.2 414 0x80000009 0x00EF88 1
10.200.1.4 10.200.1.4 821 0x80000007 0x005F24 2

Net Link States (Area 1)

Link ID ADV Router Age Seq# Checksum
10.1.3.2 10.1.4.2 1800 0x80000004 0x00F040
10.1.4.2 10.1.4.2 1800 0x80000005 0x00FF2D

Summary Net Link States (Area 1)

Link ID ADV Router Age Seq# Checksum
0.0.0.0 10.200.1.2 595 0x80000006 0x00D5AD
10.1.1.0 10.200.1.2 79 0x80000004 0x009AD5
10.200.1.2 10.200.1.2 1790 0x80000006 0x00257F
Cisco-2651#show ip ospf interface

Loopback1 is up, line protocol is up
Internet Address 10.200.1.3/32, Area 1
Process ID 1, Router ID 10.1.4.2, Network Type LOOPBACK, Cost: 1
Loopback interface is treated as a stub Host
FastEthernet0/0 is up, line protocol is up
Internet Address 10.1.4.2/24, Area 1
Process ID 1, Router ID 10.1.4.2, Network Type BROADCAST, Cost: 1
Transmit Delay is 1 sec, State DR, Priority 1
Designated Router (ID) 10.1.4.2, Interface address 10.1.4.2
Backup Designated router (ID) 10.200.1.4, Interface address 10.1.4.1
Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
Hello due in 00:00:02
Index 2/2, flood queue length 0
Next 0x0(0)/0x0(0)
Last flood scan length is 1, maximum is 4
Last flood scan time is 0 msec, maximum is 0 msec
Neighbor Count is 1, Adjacent neighbor count is 1
Adjacent with neighbor 10.200.1.4 (Backup Designated Router)
Suppress hello for 0 neighbor(s)
FastEthernet0/1 is up, line protocol is up
Internet Address 10.1.3.2/24, Area 1
Process ID 1, Router ID 10.1.4.2, Network Type BROADCAST, Cost: 1
Transmit Delay is 1 sec, State DR, Priority 1
Designated Router (ID) 10.1.4.2, Interface address 10.1.3.2
Backup Designated router (ID) 10.200.1.2, Interface address 10.1.3.1
Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
Hello due in 00:00:01
Index 1/1, flood queue length 0
Next 0x0(0)/0x0(0)
Last flood scan length is 1, maximum is 3
Last flood scan time is 0 msec, maximum is 0 msec
Neighbor Count is 1, Adjacent neighbor count is 1
Adjacent with neighbor 10.200.1.2 (Backup Designated Router)
Suppress hello for 0 neighbor(s)
Top of the page Show Commands Menu

QUAGGA B ROUTER

Quagga_B#show interface description

Interface Status Protocol Description
eth0 up up
lo up up
Quagga_B#show interface eth0

Interface eth0 is up, line protocol is up
index 2 metric 1 mtu 1500
flags: <UP,BROADCAST,RUNNING,MULTICAST>
HWaddr: 00:02:11:22:88:88
inet 10.1.4.1/24 broadcast 10.1.4.255
inet6 fe80::201:66ff:1122:8888/64
2598 input packets (0 multicast), 213456 bytes, 0 dropped
0 input errors, 0 length, 0 overrun, 0 CRC, 0 frame
0 fifo, 0 missed
2491 output packets, 229815 bytes, 0 dropped
0 output errors, 0 aborted, 0 carrier, 0 fifo, 0 heartbeat
0 window, 0 collisions
Quagga_B (Linux level)#route -n

Kernel IP routing table
Destination Gateway Genmask Indic Metric Ref Use Iface
10.200.1.3 10.1.4.2 255.255.255.255 UGH 11 0 0 eth0
10.200.1.2 10.1.4.2 255.255.255.255 UGH 21 0 0 eth0
10.1.4.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
10.1.1.0 10.1.4.2 255.255.255.0 UG 21 0 0 eth0
10.1.3.0 10.1.4.2 255.255.255.0 UG 11 0 0 eth0
0.0.0.0 10.1.4.2 0.0.0.0 UG 12 0 0 eth0
Quagga_B#show ip route

Codes: K - kernel route, C - connected, S - static, R - RIP, O - OSPF,
I - ISIS, B - BGP, > - selected route, * - FIB route

C>* 10.1.4.0/24 is directly connected, eth0
C>* 10.200.1.4/32 is directly connected, lo
C>* 127.0.0.0/8 is directly connected, lo
O 10.1.4.0/24 [110/10] is directly connected, eth0, 01:04:26
O 10.200.1.4/32 [110/10] is directly connected, lo, 01:04:26
O 10.1.1.0/24 [110/21] via 10.1.4.2, eth0, 00:28:00
O>* 10.1.3.0/24 [110/11] via 10.1.4.2, eth0, 00:52:54
O>* 10.200.1.2/32 [110/21] via 10.1.4.2, eth0, 00:28:04
O>* 10.200.1.3/32 [110/11] via 10.1.4.2, eth0, 01:04:17
O>* 0.0.0.0/0 [110/12] via 10.1.4.2, eth0, 00:28:04
Quagga_B#show ip ospf border-routers

============ OSPF router routing table =============
R 10.200.1.2 [11] area: 0.0.0.1, ABR
via 10.1.4.2, eth0
Quagga_B#show ip ospf database

OSPF Router with ID (10.200.1.4)

Router Link States (Area 0.0.0.1 [Stub])

Link ID ADV Router Age Seq# CkSum Link count
10.1.4.2 10.1.4.2 1718 0x8000000a 0x933c 3
10.200.1.2 10.200.1.2 1690 0x80000005 0xf784 1
10.200.1.4 10.200.1.4 294 0x80000004 0x6521 2

Net Link States (Area 0.0.0.1 [Stub])

Link ID ADV Router Age Seq# CkSum
10.1.3.2 10.1.4.2 1718 0x80000001 0xf63d
10.1.4.2 10.1.4.2 1887 0x80000002 0x062a

Summary Link States (Area 0.0.0.1 [Stub])

Link ID ADV Router Age Seq# CkSum Route
0.0.0.0 10.200.1.2 163 0x80000003 0xdbaa 0.0.0.0/0
10.1.1.0 10.200.1.2 1715 0x80000001 0xa0d2 10.1.1.0/24
10.200.1.2 10.200.1.2 143 0x80000003 0x2b7c 10.200.1.2/32
Quagga_B#show ip ospf route

============ OSPF network routing table ============
N IA 0.0.0.0/0 [12] area: 0.0.0.1
via 10.1.4.2, eth0
N IA 10.1.1.0/24 [21] area: 0.0.0.1
via 10.1.4.2, eth0
N 10.1.3.0/24 [11] area: 0.0.0.1
via 10.1.4.2, eth0
N 10.1.4.0/24 [10] area: 0.0.0.1
directly attached to eth0
N IA 10.200.1.2/32 [21] area: 0.0.0.1
via 10.1.4.2, eth0
N 10.200.1.3/32 [11] area: 0.0.0.1
via 10.1.4.2, eth0
N 10.200.1.4/32 [10] area: 0.0.0.1
directly attached to lo

============ OSPF router routing table =============
R 10.200.1.2 [11] area: 0.0.0.1, ABR
via 10.1.4.2, eth0

============ OSPF external routing table ===========
Quagga_B#show ip ospf neighbor

Neighbor ID Pri State Dead Time Address Interface RXmtL RqstL DBsmL
10.1.4.2 1 Full/DR 33.812s 10.1.4.2 eth0:10.1.4.1 0 0 0
Quagga_B#show ip forwarding

IP forwarding is off
See for explanation on Linux IP forwarding.

Quagga_B#show ip ospf interface

eth0 is up
ifindex 2, MTU 1500 bytes, BW 0 Kbit <UP,BROADCAST,RUNNING,MULTICAST>
Internet Address 10.1.4.1/24, Broadcast 10.1.4.255, Area 0.0.0.1 [Stub]
MTU mismatch detection:enabled
Router ID 10.200.1.4, Network Type BROADCAST, Cost: 10
Transmit Delay is 1 sec, State Backup, Priority 1
Designated Router (ID) 10.1.4.2, Interface Address 10.1.4.2
Backup Designated Router (ID) 10.200.1.4, Interface Address 10.1.4.1
Multicast group memberships: OSPFAllRouters OSPFDesignatedRouters
Timer intervals configured, Hello 10s, Dead 40s, Wait 40s, Retransmit 5
Hello due in 6.517s
Neighbor Count is 1, Adjacent neighbor count is 1
lo is up
ifindex 1, MTU 16436 bytes, BW 0 Kbit <UP,LOOPBACK,RUNNING>
Internet Address 10.200.1.4/32, Area 0.0.0.1 [Stub]
MTU mismatch detection:enabled
Router ID 10.200.1.4, Network Type LOOPBACK, Cost: 10
Transmit Delay is 1 sec, State Loopback, Priority 1
No designated router on this network
No backup designated router on this network
Multicast group memberships: <None>
Timer intervals configured, Hello 10s, Dead 40s, Wait 40s, Retransmit 5
Hello due in inactive
Neighbor Count is 0, Adjacent neighbor count is 0
Quagga_B#traceroute 10.200.1.1

traceroute to 10.200.1.1 (10.200.1.1), 30 hops max, 40 byte packets
1 10.1.4.2 0.918 ms 0.960 ms 0.951 ms
2 10.1.3.1 0.416 ms 0.336 ms 0.340 ms
3 10.1.1.2 0.790 ms * 0.834 ms
Traceroute must be installed on your operational system to be used under the Quagga router. See the Quagga tutorial for help.

TCP/IP: Quagga OSPF lanjut - Revision history

Onnowpurbo at 23:54, 2 January 2019

Onnowpurbo: New page: 1. CASE PRINCIPLE We will test in this third example a medium difficulty level environment where two routers (Cisco 3750 & Quagga B) are linked together with two OPSF areas, one OSPF area...