WiFi: HotSpot - Instalasi CoovaChilli - Revision history

Onnowpurbo: /* Pranala Menarik */

2010-05-11T02:19:03Z

Pranala Menarik

← Older revision		Revision as of 02:19, 11 May 2010
Line 192:		Line 192:
	* [[WiFi: HotSpot - CoovaChilli Fitur dan Keterangan Tambahan]]		* [[WiFi: HotSpot - CoovaChilli Fitur dan Keterangan Tambahan]]
	* [[WiFi: HotSpot]]		* [[WiFi: HotSpot]]

			[[Category: WiFi]]
			[[Category: HotSpot]]
			[[Category: CoovaChilli]]

Onnowpurbo: /* Menginstalasi CoovaChilli dari Source Code */

2010-04-09T07:35:45Z

Menginstalasi CoovaChilli dari Source Code

← Older revision		Revision as of 07:35, 9 April 2010
Line 56:		Line 56:

	sudo apt-get install build-essential linux-headers-server		sudo apt-get install build-essential linux-headers-server
	wget http://ap.coova.org/chilli/coova-chilli-1.0.13.tar.gz		wget http://ap.coova.org/chilli/coova-chilli-1.2.2.tar.gz
	tar xzf coova-chilli-1.0.13.tar.gz && cd coova-chilli-1.0.13		cp coova-chilli-1.2.2.tar.gz /usr/local/src
			cd /usr/local/src
			tar xzf coova-chilli-1.2.2.tar.gz && cd coova-chilli-1.2.2
	./configure		./configure
	make		make
Line 97:		Line 99:

	chmod +x /etc/init.d/chilli		chmod +x /etc/init.d/chilli


	==Konfigurasi Dasar==		==Konfigurasi Dasar==

Onnowpurbo at 12:57, 8 April 2010

2010-04-08T12:57:08Z

← Older revision		Revision as of 12:57, 8 April 2010
Line 8:		Line 8:
	==Instalasi CoovaChilli menggunakan paket==		==Instalasi CoovaChilli menggunakan paket==

	~~To install the~~ CoovaChilli ~~package~~, ~~first~~ download ~~it (or the latest version available from~~ http://www.coova.org/CoovaChilli):		Untuk menginstalasi paket CoovaChilli, pertama-tama kita perlu men-download versi terakhir yag tersedia dari http://www.coova.org/CoovaChilli, misalnya:

	sudo wget http://ap.coova.org/chilli/coova-chilli_1.0.13-1_i386.deb		sudo wget http://ap.coova.org/chilli/coova-chilli_1.0.13-1_i386.deb

	~~Then install it:~~		Kemudian menginstallnya menggunakan perintah

	sudo dpkg -i coova-chilli_1.0.13-1_i386.deb		sudo dpkg -i coova-chilli_1.0.13-1_i386.deb

	Copy ~~the~~ default ~~configuration files and~~ Apache ~~site configuration~~:		Copy file konfigurasi default dan konfigurasi Apache melalui perintah:

	cp /etc/chilli/defaults /etc/chilli/config		cp /etc/chilli/defaults /etc/chilli/config
Line 29:		Line 29:
	wget http://ap.coova.org/js/chilli.js		wget http://ap.coova.org/js/chilli.js

	~~Change~~ Host Address		===Ubah Host Address===

	Edit index.html ~~to use~~ chilli.js ~~from local~~ (~~this example uses the~~ host IP address as 10.1.0.1)		Edit index.html untuk menggunakan chilli.js dari mesin lokal (dalam contoh ini menggunakan host [[IP address]] 10.1.0.1)

	sed -i 's/ap.coova.org\/js\/chilli.js/10.1.0.1\/uam\/chilli.js/g' /var/www/hotspot/uam/index.html		sed -i 's/ap.coova.org\/js\/chilli.js/10.1.0.1\/uam\/chilli.js/g' /var/www/hotspot/uam/index.html

	Edit ChilliLibrary.js ~~to use the correct host~~ IP address (~~again, example uses~~ 10.1.0.1):		Edit ChilliLibrary.js untuk menggunakan IP address host yang benar (dalam contoh ini menggunakan 10.1.0.1):

	sed -i 's/192.168.182.1/10.1.0.1/g' /etc/chilli/www/ChilliLibrary.js		sed -i 's/192.168.182.1/10.1.0.1/g' /etc/chilli/www/ChilliLibrary.js
	sed -i 's/192.168.182.1/10.1.0.1/g' /var/www/hotspot/ChilliLibrary.js		sed -i 's/192.168.182.1/10.1.0.1/g' /var/www/hotspot/ChilliLibrary.js

	~~To enable~~ coovachilli ~~change~~ START_CHILLI to 1		Untuk bisa mengaktifkan coovachilli ubah START_CHILLI menjadi 1

	~~nano -w~~ /etc/default/chilli		vi /etc/default/chilli

	~~To enable on reboot~~		Pastikan

	START_CHILLI=1		START_CHILLI=1
	CONFFILE="/etc/chilli.conf"		CONFFILE="/etc/chilli.conf"

	~~To enable without a reboot~~		Untuk me-restart kita bisa melakukan melalui

	sudo /etc/init.d/chilli start		sudo /etc/init.d/chilli start

	==Menginstalasi CoovaChilli dari Source Code==		==Menginstalasi CoovaChilli dari Source Code==


	sudo apt-get install build-essential linux-headers-server		sudo apt-get install build-essential linux-headers-server
Line 63:		Line 62:
	sudo make install		sudo make install

	Copy ~~the~~ default ~~configuration files and~~ Apache ~~site configuration~~:		Copy file konfigurasi default dan konfigurasi Apache:

	cp /etc/chilli/defaults /etc/chilli/config		cp /etc/chilli/defaults /etc/chilli/config
Line 74:		Line 73:
	wget http://ap.coova.org/js/chilli.js		wget http://ap.coova.org/js/chilli.js

	Edit index.html ~~to use~~ chilli.js ~~from local~~ (default is 192.168.2.1 ~~for few networks and many hosts~~)		Edit index.html untuk menggunakan chilli.js dari mesin lokal (default adalah 192.168.2.1 untuk jaringan kecil dengan banyak host)

	sed -i 's/ap.coova.org\/js\/chilli.js/192.168.2.1\/uam\/chilli.js/g' /var/www/hotspot/uam/index.html		sed -i 's/ap.coova.org\/js\/chilli.js/192.168.2.1\/uam\/chilli.js/g' /var/www/hotspot/uam/index.html

	~~The~~ startup ~~script~~:		Script untuk startup adalah sebagai berikut:

	cd /etc/init.d/		cd /etc/init.d/
Line 85:		Line 84:
	sed '21,30s/**/# &/' chilli > chilli.tmp && mv chilli.tmp chilli && chmod 755 chilli		sed '21,30s/**/# &/' chilli > chilli.tmp && mv chilli.tmp chilli && chmod 755 chilli

	~~the last command comments out the lines~~ 21 to 30		perintah terakhir untuk meng-remarks line 21 sampai 30

	~~please check the startup file for your special paths and start~~ chilli ~~with~~		Check konfigurasi dengan menjalankan chilli melalui perintah

	sudo /etc/init.d/chilli start		sudo /etc/init.d/chilli start

	~~To enable our~~ chilli ~~start up~~ script ~~at boot.~~		Untuk mengaktifkan chilli script saat booting kita dapat menggunakan perintah

	update-rc.d chilli defaults		update-rc.d chilli defaults

	~~We also need to make our~~ chilli ~~file executable by using the following command.~~		Kita perlu memastikan bahwa file chilli dapat dijalankan menggunakan perintah

	chmod +x /etc/init.d/chilli		chmod +x /etc/init.d/chilli
Line 101:		Line 100:

	==Konfigurasi Dasar==		==Konfigurasi Dasar==

	~~Basic Configuration~~		Lihat file /etc/chilli/defaults untuk melihat kemungkinan konfigurasi. Copy file ini ke file baru dengan nama "config" (di directory yang sama) dan edit setting-an jika di perlukan. Untuk menghasilkan settingan yang di perlukan dan menjalankan chilli, jalankan perintah "/etc/init.d/chilli start". Perintah ini akan menghasilkan file main.conf, local.conf, dan hs.conf di /etc/chilli/. Jika ingin membuat perubahan In order to make changes to the settings at a later date, rerun chilli start.

	~~See~~ /etc/chilli/defaults ~~file for details on possible configurations~~. Copy ~~this to a new~~ file ~~called~~ "config" (~~in the same~~ directory) ~~and~~ edit ~~the settings~~. ~~To load the settings and start~~ chilli, ~~run~~ "/etc/init.d/chilli start". ~~This will generate~~ main.conf, local.conf, ~~and~~ hs.conf ~~files in~~ /etc/chilli/ ~~for you~~. In order to make changes to the settings at a later date, rerun chilli start.

	NOTE: the chilli config file only generates the main.conf if the service is restarted by /etc/init.d/chilli which we start to configure now. When you start chilli in debug mode by entering "chilli --debug --fg" then coovachilli gets started with the main.conf. If you change the config file and restart chilli in debug mode nothing would change. So you can ether edit the main.conf and edit in debug mode or edit the config file and restart the service		NOTE: the chilli config file only generates the main.conf if the service is restarted by /etc/init.d/chilli which we start to configure now. When you start chilli in debug mode by entering "chilli --debug --fg" then coovachilli gets started with the main.conf. If you change the config file and restart chilli in debug mode nothing would change. So you can ether edit the main.conf and edit in debug mode or edit the config file and restart the service
Line 110:		Line 107:
	Per default, it is assumed that Ethernet device eth0 is your connection to the Internet and eth1 is the interface you want to have clients (subscribers) on. If this is not the case, then change the HS_WANIF configuration to be your Internet connected device and HS_LANIF to be your WiFi device, for example. With the right devices configured, restart chilli and you are on your way.		Per default, it is assumed that Ethernet device eth0 is your connection to the Internet and eth1 is the interface you want to have clients (subscribers) on. If this is not the case, then change the HS_WANIF configuration to be your Internet connected device and HS_LANIF to be your WiFi device, for example. With the right devices configured, restart chilli and you are on your way.

	~~nano~~ /etc/chilli/config		vi /etc/chilli/config

	Edit the first 63 lines of the file to the following until the HS_UAMSERVICE url is defined.		Edit the first 63 lines of the file to the following until the HS_UAMSERVICE url is defined.

Onnowpurbo at 06:24, 7 April 2010

2010-04-07T06:24:15Z

Show changes

Onnowpurbo at 02:45, 7 April 2010

2010-04-07T02:45:51Z

← Older revision		Revision as of 02:45, 7 April 2010
Line 183:		Line 183:
	#		#
	HS_UAMSERVICE=https://10.1.0.1/cgi-bin/hotspotlogin.cgi		HS_UAMSERVICE=https://10.1.0.1/cgi-bin/hotspotlogin.cgi



			==Pranala Menarik==

			* [[WiFi: HotSpot - CoovaChilli Pendahuluan]]
			* [[WiFi: HotSpot - CoovaChilli Kebutuhan Hardware dan Software]]
			* [[WiFi: HotSpot - CoovaChilli Instalasi Radius Server]]
			* [[WiFi: HotSpot - Instalasi CoovaChilli]]
			* [[WiFi: HotSpot - CoovaChilli Instalasi Firewall]]
			* [[WiFi: HotSpot - CoovaChilli Instalasi Apache dan SSL]]
			* [[WiFi: HotSpot - CoovaChilli Fitur dan Keterangan Tambahan]]
			* [[WiFi: HotSpot]]

Onnowpurbo: New page: Install CoovaChilli There are two methods of installing coovachilli on ubuntu. * Package * Source Both methods are listed below CoovaChilli Package Installation To install th...

2010-03-01T23:40:01Z

New page: Install CoovaChilli There are two methods of installing coovachilli on ubuntu. * Package * Source Both methods are listed below CoovaChilli Package Installation To install th...

New page

Install CoovaChilli

There are two methods of installing coovachilli on ubuntu.

* Package
* Source

Both methods are listed below

CoovaChilli Package Installation

To install the CoovaChilli package, first download it (or the latest version available from http://www.coova.org/CoovaChilli):

sudo wget http://ap.coova.org/chilli/coova-chilli_1.0.13-1_i386.deb

Then install it:

sudo dpkg -i coova-chilli_1.0.13-1_i386.deb

Copy the default configuration files and Apache site configuration:

cp /etc/chilli/defaults /etc/chilli/config
mkdir /var/www/hotspot
cd /var/www/hotspot
cp /etc/chilli/www/* /var/www/hotspot
mkdir /var/www/hotspot/images
cp /var/www/hotspot/coova.jpg /var/www/hotspot/images/
mkdir /var/www/hotspot/uam
cd /var/www/hotspot/uam
wget http://ap.coova.org/uam/
wget http://ap.coova.org/js/chilli.js

Change Host Address

Edit index.html to use chilli.js from local (this example uses the host IP address as 10.1.0.1)

sed -i 's/ap.coova.org\/js\/chilli.js/10.1.0.1\/uam\/chilli.js/g' /var/www/hotspot/uam/index.html

Edit ChilliLibrary.js to use the correct host IP address (again, example uses 10.1.0.1):

sed -i 's/192.168.182.1/10.1.0.1/g' /etc/chilli/www/ChilliLibrary.js
sed -i 's/192.168.182.1/10.1.0.1/g' /var/www/hotspot/ChilliLibrary.js

To enable coovachilli change START_CHILLI to 1

nano -w /etc/default/chilli

To enable on reboot

START_CHILLI=1
CONFFILE="/etc/chilli.conf"

To enable without a reboot

sudo /etc/init.d/chilli start

CoovaChilli Source Installation

To build from source:

sudo apt-get install build-essential linux-headers-server
wget http://ap.coova.org/chilli/coova-chilli-1.0.13.tar.gz
tar xzf coova-chilli-1.0.13.tar.gz && cd coova-chilli-1.0.13
./configure
make
sudo make install

Copy the default configuration files and Apache site configuration:

cp /etc/chilli/defaults /etc/chilli/config
mkdir /var/www/hotspot
cd /var/www/hotspot
cp /etc/chilli/www/* /var/www/hotspot
mkdir /var/www/hotspot/uam
cd /var/www/hotspot/uam
wget http://ap.coova.org/uam/
wget http://ap.coova.org/js/chilli.js

Edit index.html to use chilli.js from local (default is 192.168.2.1 for few networks and many hosts)

sed -i 's/ap.coova.org\/js\/chilli.js/192.168.2.1\/uam\/chilli.js/g' /var/www/hotspot/uam/index.html

The startup script:

cd /etc/init.d/
wget http://dev.coova.org/svn/coova-chilli/debian/coova-chilli.chilli.init
mv chilli chilli.bak && mv coova-chilli.chilli.init chilli && chmod 755 chilli
sed '21,30s/**/# &/' chilli > chilli.tmp && mv chilli.tmp chilli && chmod 755 chilli

the last command comments out the lines 21 to 30

please check the startup file for your special paths and start chilli with

sudo /etc/init.d/chilli start

To enable our chilli start up script at boot.

update-rc.d chilli defaults

We also need to make our chilli file executable by using the following command.

chmod +x /etc/init.d/chilli

Basic Configuration

See /etc/chilli/defaults file for details on possible configurations. Copy this to a new file called "config" (in the same directory) and edit the settings. To load the settings and start chilli, run "/etc/init.d/chilli start". This will generate main.conf, local.conf, and hs.conf files in /etc/chilli/ for you. In order to make changes to the settings at a later date, rerun chilli start.

NOTE: the chilli config file only generates the main.conf if the service is restarted by /etc/init.d/chilli which we start to configure now. When you start chilli in debug mode by entering "chilli --debug --fg" then coovachilli gets started with the main.conf. If you change the config file and restart chilli in debug mode nothing would change. So you can ether edit the main.conf and edit in debug mode or edit the config file and restart the service

Per default, it is assumed that Ethernet device eth0 is your connection to the Internet and eth1 is the interface you want to have clients (subscribers) on. If this is not the case, then change the HS_WANIF configuration to be your Internet connected device and HS_LANIF to be your WiFi device, for example. With the right devices configured, restart chilli and you are on your way.

nano /etc/chilli/config

Edit the first 63 lines of the file to the following until the HS_UAMSERVICE url is defined.

# -*- /bin/sh -*-
#
# Coova-Chilli Default Configurations.
# To customize, copy this file to /etc/chilli/config
# and edit to your liking. This is included in shell scripts
# that configure chilli and related programs before file 'config'.

# HS_WANIF=eth0 # WAN Interface toward the Internet
HS_LANIF=eth1 # Subscriber Interface for client devices
HS_NETWORK=10.1.0.0 # HotSpot Network (must include HS_UAMLISTEN)
HS_NETMASK=255.255.255.0 # HotSpot Network Netmask
HS_UAMLISTEN=10.1.0.1 # HotSpot IP Address (on subscriber network)
HS_UAMPORT=3990 # HotSpot Port (on subscriber network)

# Allow some additional local ports (used in the up.sh script when
# setting the firewall for the created tun/tap)
HS_TCP_PORTS="80 443"

# HS_DYNIP=
# HS_DYNIP_MASK=255.255.255.0
# HS_STATIP=
# HS_STATIP_MASK=255.255.255.0
# HS_DNS_DOMAIN=
# if your interface eth0 for example has the ip 192.168.5.2
# and your router where your internet connection is established has the address
# 192.168.5.1 than you are allowed to access the router from your wlan network 192.168.2.0/24
# so you have don't have to define the dns servers below
#
# HS_DNS2=62.72.64.237
# HS_DNS1=192.168.2.1

###
# HotSpot settings for simple Captive Portal
#
HS_NASID=nas01
HS_UAMSECRET=uamsecret
HS_RADIUS=127.0.0.1
HS_RADIUS2=127.0.0.1
HS_RADSECRET=radiussecret
# please provide here the address for your router too.
# From the example above it has the address 192.168.0.1 (comma separated)
HS_UAMALLOW=10.1.0.0/24,192.168.0.1

# Put entire domains in the walled-garden with DNS inspection
# HS_UAMDOMAINS=".paypal.com,.paypalobjects.com"

# Optional initial redirect and RADIUS settings
# HS_SSID=<ssid> # To send to the captive portal
# HS_NASMAC=<mac address> # To explicitly set Called-Station-Id
# HS_NASIP=<ip address> # To explicitly set NAS-IP-Address

# The server to be used in combination with HS_UAMFORMAT to
# create the final chilli 'uamserver' url configuration.
HS_UAMSERVER=10.1.0.1

# Use HS_UAMFORMAT to define the actual captive portal url.
# Shell variable replacement takes place when evaluated, so here
# HS_UAMSERVER is escaped and later replaced by the pre-defined
# HS_UAMSERVER to form the actual "--uamserver" option in chilli.
HS_UAMFORMAT=https://\$HS_UAMSERVER/uam/

# Same principal goes for HS_UAMHOMEPAGE.
HS_UAMHOMEPAGE=http://\$HS_UAMLISTEN:\$HS_UAMPORT/www/coova.html

# This option will be configured to be the WISPr LoginURL as well
# as provide "uamService" to the ChilliController. The UAM Service is
# described in: http://coova.org/wiki/index.php/CoovaChilli/UAMService
#
HS_UAMSERVICE=https://10.1.0.1/cgi-bin/hotspotlogin.cgi