OLSR - di Ubuntu: Difference between revisions

From OnnoCenterWiki
Jump to navigationJump to search
← Older edit
Onnowpurbo (talk | contribs)
69,477 edits
Onnowpurbo (talk | contribs)
69,477 edits
Onnowpurbo (talk | contribs)
69,477 edits
 
(46 intermediate revisions by the same user not shown)
Line 1: Line 1:
Sumber: http://wmunguiam.blogspot.com/2009/01/olsr-over-ubuntu-804.html
Sumber: http://wmunguiam.blogspot.com/2009/01/olsr-over-ubuntu-804.html


Pada dasarnya ada dua (2) cara utk mengaktifkan OLSR di Ubuntu
Pada dasarnya ada dua (2) cara utk mengaktifkan [[OLSR]] di [[Ubuntu]], yaitu


* Install dari repository
* Install dari repository
* Compile dari source code
* Compile dari [[source code]]


==Instalasi OLSRD dari repository==
==Instalasi OLSRD dari repository==


OLSR dapat di instalasi langsung menggunakan perintah
[[OLSR]] dapat di instalasi langsung dari [[repository]] menggunakan perintah


  sudo apt-get install olsrd olsrd-plugins
  sudo apt-get install olsrd olsrd-plugins
hanya saja ini biasanya bukan versi bleeding edge :)
tapi lumayan stabil lah untuk ngoprek.
Masalah dengan olsrd hasil apt-get adalah
* olsrd dengan /etc/init.d/olsrd mencari /etc/olsrd.conf bukan /etc/olsrd/olsrd.conf. Akibatnya akan abort karena tidak menemukan file konfigurasi.
* olsrd akan melaporan error, buang LinkQualityDijkstraLimit dan LinkQualityWinSize di olsrd.conf. Caranya edit
vi /etc/olsrd.conf
Remark line 124
# LinkQualityDijkstraLimit 3 3.0
Remark line 240
# LinkQualityWinSize    100


==Compile dari Source Code==
==Compile dari Source Code==
Line 21: Line 39:
Download [[source code]] dari
Download [[source code]] dari


  http://www.olsr.org/?q=download
  http://www.olsr.org/mediawiki/index.php/Releases


Copy, Extract dan Compile
Copy, Extract dan Compile


  cp olsrd-0.6.2.tar.bz2 /usr/local/src/
wget http://www.olsr.org/releases/0.9/olsrd-0.9.0.2.tar.bz2
  cp olsrd-0.9.0.2.tar.bz2 /usr/local/src/
  cd /usr/local/src
  cd /usr/local/src
  tar jxvf olsrd-0.6.2.tar.bz2  
  tar jxvf olsrd-0.9.0.2.tar.bz2  
  cd /usr/local/src/olsrd-0.6.2
  cd /usr/local/src/olsrd-0.9.0.2
  make all
  make all
  make install
  make install
make libs
make install_libs
mkdir -p /etc
cp -i files/olsrd.conf.default.lq /etc/olsrd.conf


4.-Edit /etc/olsrd/olsrd.conf as below as example (Modify if you need)
Sedikit catatan tentang olsrd
wmunguiam@server:~$ sudo cp /etc/olsrd/olsrd.conf /etc/olsrd/olsrd.conf.original
wmunguiam@server:~$ sudo vim /etc/olsrd/olsrd.conf


    DebugLevel 1
========= C O N F I G U R A T I O N - F I L E ============
    Interface "wlan1"
olsrd uses the configfile /etc/olsrd.conf
    {
a default configfile. A sample RFC-compliance aimed
configfile can be found in olsrd.conf.default.rfc.
However none of the larger OLSRD using networks use that
so install a configfile with activated link quality exstensions
per default.
can be found at files/olsrd.conf.default.lq
==========================================================
mkdir -p /etc
cp -i files/olsrd.conf.default.lq /etc/olsrd.conf
-------------------------------------------
Edit /etc/olsrd.conf before running olsrd!!
-
 
==Edit OLSRD.CONF==
 
Edit olsrd.conf
 
sudo cp /etc/olsrd.conf /etc/olsrd.conf.original
sudo vi /etc/olsrd.conf
 
Pastikan ada interface yang aktif menggunakan OLSR, misalnya eth1, wlan0 dll.
Contoh konfigurasi sederhana
 
InterfaceDefaults {
    Ip4Broadcast      255.255.255.255
}
Interface "eth1" {
     # Ip4Broadcast 255.255.255.255
     # Ip4Broadcast 255.255.255.255
     # Ip6AddrType site-local
     # Ip6AddrType site-local
     # Ip6MulticastSite ff05::11
     # Ip6MulticastSite ff05::11
     # Ip6MulticastGlobal ff0e::1
     # Ip6MulticastGlobal ff0e::1
 
     HelloInterval 6.0
     HelloInterval 6.0
     HelloValidityTime 600.0
     HelloValidityTime 600.0
Line 54: Line 101:
     # Weight 0
     # Weight 0
     # LinkQualityMult 192.168.0.1 0.5
     # LinkQualityMult 192.168.0.1 0.5
    }


    }
 
    LinkQualityFishEye 1
Tambahkan untuk Plugin txtinfo
    LinkQualityDijkstraLimit 3 3.0
 
    IpVersion 4
LoadPlugin "olsrd_txtinfo.so.0.1"
    ClearScreen yes
    Hna4
     {
     {
     # Internet gateway:
     PlParam "port" "8080"
    # Agregado WALTER
     PlParam "Host" "127.0.0.1"
     # 10.10.10.0 255.255.255.0
     # PlParam "Net" "0.0.0.0 0.0.0.0"
     # 0.0.0.0 0.0.0.0
     # PlParam "Host" "80.23.53.22"
     # more entries can be added:
     # # PlParam "Net" "192.168.0.0 255.255.0.0" 
     # 192.168.1.0 255.255.255.0
     }
     }
    Hna6
    {
    # Internet gateway:
    # :: 0
    # more entries can be added:
    # fec0:2200:106:: 48
    }
    AllowNoInt no
    #TosValue 16
    Willingness 7
    IpcConnect
    {
    MaxConnections 1
    Host 127.0.0.1
    Host 10.10.10.11
    Net 10.10.10.0 255.255.255.0
    }
    UseHysteresis no
    #HystScaling 0.50
    #HystThrHigh 0.80
    #HystThrLow 0.30
    LinkQualityLevel 2
    LinkQualityWinSize 100
    Pollrate 0.1
    TcRedundancy 2
    MprCoverage 5
    #LoadPlugin "olsrd_httpinfo.so.0.1"
    #{
    # # defaults to 1978
    # PlParam "Port" "8080"
    # #PlParam "Host" "80.23.53.22"
    # #PlParam "Net" "10.0.0.0 255.0.0.0"
    # #PlParam "Net" "0.0.0.0 0.0.0.0"
    #}
    #LoadPlugin "olsrd_dyn_gw.so.0.4"
    #{
    # PlParam "Interval" "40"
    # PlParam "Ping" "141.1.1.1"
    # PlParam "Ping" "194.25.2.129"
    #}
    #LoadPlugin "olsrd_nameservice.so.0.2"
    #{
    #PlParam "name" "xxx"
    #PlParam "a.b.c.d" "xxx-eth"
    #PlParam "a.b.c.e" "xxx-bbb"
    #PlParam "a.b.c.f" "xxx-olsr"
    #PlParam "suffix" ".olsr"
    #}


    #LoadPlugin "olsrd_dot_draw.so.0.3"
    #{
    #PlParam "accept" "192.168.0.5"
    #PlParam "port" "2004"
    #}


Kadang kala pada saat kita jalankan olsrd akan melaporan error, buang LinkQualityDijkstraLimit dan LinkQualityWinSize di olsrd.conf. Caranya edit
vi /etc/olsrd.conf
Remark line 124
# LinkQualityDijkstraLimit 3 3.0
Remark line 240
# LinkQualityWinSize    100
==Cek konfigurasi==
Sebaiknya cek konfigurasi menggunakan perintah
sudo olsrd -d 2
atau bagi yang menginstall menggunakan apt-get bisa
sudo olsrd -d 2 -f /etc/olsrd/olsrd.conf
Kayanya menggunakan apt-get ada beberapa error, di beri # aja di line yang error. Biasanya setelah di # error yang ada maka olsrd akan jalan.
===IPv6===
Menjalankan OLSR Untuk IPv6
sudo olsrd -d 2 -ipv6


==Edit Interface==
==Edit Interface==
Kita dapat melakukannya menggunakan
* iwconfig di console
* edit /etc/network/interface
Dengan asumsi eth1 adalah interface [[wireless]].
Edit di console
iwconfig wlan0 mode ad-hoc
iwconfig wlan0 essid MESH
iwconfig wlan0 ap 02:ca:ff:ee:ba:be
iwconfig wlan0 channel 1
ifconfig wlan0 10.1.1.1
ifconfig wlan0 netmask 255.0.0.0
atau
iwconfig wlan0 mode ad-hoc essid MESH ap 02:ca:ff:ee:ba:be channel 1
ifconfig wlan0 10.1.1.1 netmask 255.0.0.0


Edit  
Edit  
Line 135: Line 177:
     auto lo
     auto lo
     iface lo inet loopback
     iface lo inet loopback
 
    auto wlan0
    allow-hot plug wlan0
    iface wlan0 inet static
    address 10.1.1.1
    broadcast 10.255.255.255
    netmask 255.0.0.0
    wireless-mode ad-hoc
    wireless-channel 1
    wireless-essid MESH
    wireless-bssid 02:ca:ff:ee:ba:be
     auto wlan0
     auto wlan0
     allow-hot plug wlan0
     allow-hot plug wlan0
Line 145: Line 198:
     wireless-key s:12345
     wireless-key s:12345
     wireless-essid mesh
     wireless-essid mesh
 
     #auto eth0
     #auto eth0
     #iface eth0 inet dhcp
     #iface eth0 inet dhcp
   
    # Konfigurasi IPv6
    iface wlan0 inet6 static
    address 2001:123:127::127
    netmask 128
    wireless-mode ad-hoc
    wireless-channel 1
    wireless-essid MESH
    wireless-bssid 02:ca:ff:ee:ba:be
==Restart Networking==
networking and OLSR
sudo /etc/init.d/networking restart
sudo /etc/init.d/olsrd start
Jika pada saat melakukan
sudo /etc/init.d/network restart
Keluar error berikut
Error for wireless request "Set Mode" (8B06) :
SET failed on device wlan0 ; Invalid argument.
Error for wireless request "Set Mode" (8B06) :
SET failed on device wlan0 ; Device or resource busy.
Kemungkinan wireless interface / hardware yang anda gunakan tidak mendukung mode ad-hoc. Kita perlu menggunakan USB wireless card lain.
==Verifikasi Jaringan==
Asumsinya eth1 adalah interface [[WLAN]].


6.-Restart services: networking and OLSR
ifconfig eth1
wmunguiam@server:~$ sudo /etc/init.d/network restart
wmunguiam@server:~$ sudo /etc/init.d/olsrd start


OBS: If you get this:
eth1      Link encap:Ethernet  HWaddr 00:21:00:50:a3:90 
wmunguiam@server:~$ sudo /etc/init.d/network restart
          inet addr:172.16.1.2  Bcast:172.16.255.255  Mask:255.255.0.0
          inet6 addr: fe80::221:ff:fe50:a390/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:52 errors:0 dropped:0 overruns:0 frame:188
          TX packets:88 errors:11 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:3356 (3.3 KB)  TX bytes:14387 (14.3 KB)
          Interrupt:17


    Error for wireless request "Set Mode" (8B06) :
Cek wireless
    SET failed on device wlan0 ; Invalid argument.
    Error for wireless request "Set Mode" (8B06) :
    SET failed on device wlan0 ; Device or resource busy.


Means your wireless Interface (Hardware) does not support working on Ad-hoc mode. You have to use (recommended) an USB Wireless Card.
iwconfig eth1


eth1      IEEE 802.11bg  ESSID:"MESH" 
          Mode:Ad-Hoc  Frequency:2.412 GHz  Cell: 02:CA:FF:EE:BA:BE 
          Bit Rate=54 Mb/s  Tx-Power:24 dBm 
          Retry min limit:7  RTS thr:off  Fragment thr:off
          Power Management:off
          Link Quality=5/5  Signal level=-21 dBm  Noise level=-57 dBm
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0  Missed beacon:0


7.-Verify services
Cek Routing
wmunguiam@server:~$ ifconfig wlan1
wlan1 Link encap:Ethernet direcciónHW 00:e0:4c:00:39:1d
inet dirección:10.10.10.11 Difusión:10.10.10.255 Máscara:255.255.255.0
dirección inet6: fe80::2e0:4cff:fe00:391d/64 Alcance:Vínculo
ARRIBA DIFUSIÓN CORRIENDO MULTICAST MTU:1500 Métrica:1
RX packets:0 errors:17 dropped:0 overruns:0 frame:0
TX packets:181 errors:0 dropped:0 overruns:0 carrier:0
colisiones:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:10918 (10.6 KB)


wmunguiam@server:~$ iwconfig
netstat -nr
wlan1 802.11b/g linked ESSID:"MESH"
Mode:Ad-Hoc Channel=1 Cell: B2:EF:82:A6:57:82
Bit Rate=54 Mb/s
Retry:on Fragment thr:off
Link Quality=0/100 Signal level=0 dBm Noise level=0 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0


wmunguiam@server:~$ route
Kernel IP routing table
Tabla de rutas IP del núcleo
Destination    Gateway        Genmask         Flags  MSS Window  irtt Iface
Destino Pasarela Genmask Indic Métric Ref Uso Interfaz
0.0.0.0        172.16.1.1      0.0.0.0         UG        0 0         0 eth1
192.168.1.0 * 255.255.255.0 U 0 0 0 wlan0
172.16.0.0     0.0.0.0        255.255.0.0     U         0 0         0 eth1
10.10.10.0 * 255.255.255.0 U 0 0 0 wlan1
172.16.1.1      172.16.1.1      255.255.255.255 UGH      0 0         0 eth1
link-local * 255.255.0.0 U 1000 0 0 wlan1
172.16.1.2      172.16.1.2      255.255.255.255 UGH      0 0         0 eth1
default 192.168.1.1 0.0.0.0 UG 0 0 0 wlan0


OBS: WLAN0 interface to connect to internet (GW)
Perhatikan host dengan netmask 255.255.255.255, ini merupakan host yang di tambahkan secara automatis oleh [[OLSR]].


==Referensi==
==Referensi==
Line 200: Line 280:
==Pranala Menarik==
==Pranala Menarik==


* [[WiFi: HotSpot - Linksys WRT54GL]]
* [[WiFi: HotSpot - Linksys WRT54GL Konfigurasi Orginal]]
* [[WiFi: HotSpot - Linksys WRT54GL Upgrade dd-wrt]]
* [[WiFi: HotSpot - Linksys WRT54GL Upgrade dd-wrt]]
* [[WiFi: HotSpot - Linksys WRT54GL Upgrade dd-wrt OLSR]]
* [[WiFi: HotSpot - Linksys WRT54GL Upgrade dd-wrt OLSR]]
* [[WiFi: HotSpot - DD-WRT WRT54GL Mengaktifkan OLSR]]
* [[WiFi: HotSpot - DD-WRT WRT54GL Mengaktifkan OLSR]]
* [[WiFi: HotSpot - Linksys WRT54GL Upgrade FreiFunk Firmware]]
* [[WiFi: HotSpot - Linksys WRT54GL Konfigurasi FreiFunk]]
* [[WiFi: HotSpot - Linksys WRT54GL FreiFunk Setelah Upgrade Software]]
* [[WiFi: HotSpot - Linksys WRT54GL FreiFunk Peta Mesh Network]]
* [[De-Bricking WRT54GL v.1.1]]
* [[OLSR]]
* [[OLSR]]
* [[OLSR - di Ubuntu]]
* [[WNDW: Jaringan Mesh dengan OLSR]]
* [[WNDW: Jaringan Mesh dengan OLSR]]
* [[OLSR - di Ubuntu]]
* [[WiFi: HotSpot]]
* [[Wireless Internet Berbasis WiFi]]
 
[[Category: WiFi]]
[[Category: HotSpot]]

Latest revision as of 03:34, 9 August 2015

Sumber: http://wmunguiam.blogspot.com/2009/01/olsr-over-ubuntu-804.html

Pada dasarnya ada dua (2) cara utk mengaktifkan OLSR di Ubuntu, yaitu

Instalasi OLSRD dari repository

OLSR dapat di instalasi langsung dari repository menggunakan perintah 

sudo apt-get install olsrd olsrd-plugins

hanya saja ini biasanya bukan versi bleeding edge :) tapi lumayan stabil lah untuk ngoprek.

Masalah dengan olsrd hasil apt-get adalah

  • olsrd dengan /etc/init.d/olsrd mencari /etc/olsrd.conf bukan /etc/olsrd/olsrd.conf. Akibatnya akan abort karena tidak menemukan file konfigurasi.
  • olsrd akan melaporan error, buang LinkQualityDijkstraLimit dan LinkQualityWinSize di olsrd.conf. Caranya edit
vi /etc/olsrd.conf

Remark line 124 

# LinkQualityDijkstraLimit 3 3.0

Remark line 240 

# LinkQualityWinSize    100

Compile dari Source Code

Siapkan aplikasi pendukung 

sudo apt-get install kernel-package libncurses5-dev fakeroot wget \
bzip2 g++ libssl-dev libxml2-dev doxygen bison flex libc6

Download source code dari 

http://www.olsr.org/mediawiki/index.php/Releases

Copy, Extract dan Compile 

wget http://www.olsr.org/releases/0.9/olsrd-0.9.0.2.tar.bz2
cp olsrd-0.9.0.2.tar.bz2 /usr/local/src/
cd /usr/local/src
tar jxvf olsrd-0.9.0.2.tar.bz2 
cd /usr/local/src/olsrd-0.9.0.2
make all
make install
make libs
make install_libs
mkdir -p /etc
cp -i files/olsrd.conf.default.lq /etc/olsrd.conf

Sedikit catatan tentang olsrd 

========= C O N F I G U R A T I O N - F I L E ============
olsrd uses the configfile /etc/olsrd.conf
a default configfile. A sample RFC-compliance aimed
configfile can be found in olsrd.conf.default.rfc.
However none of the larger OLSRD using networks use that
so install a configfile with activated link quality exstensions
per default.
can be found at files/olsrd.conf.default.lq
==========================================================
mkdir -p /etc
cp -i files/olsrd.conf.default.lq /etc/olsrd.conf
-------------------------------------------
Edit /etc/olsrd.conf before running olsrd!!
-

Edit OLSRD.CONF

Edit olsrd.conf 

sudo cp /etc/olsrd.conf /etc/olsrd.conf.original
sudo vi /etc/olsrd.conf

Pastikan ada interface yang aktif menggunakan OLSR, misalnya eth1, wlan0 dll. Contoh konfigurasi sederhana 

InterfaceDefaults {
    Ip4Broadcast      255.255.255.255
}
Interface "eth1" {
   # Ip4Broadcast 255.255.255.255
   # Ip6AddrType site-local
   # Ip6MulticastSite ff05::11
   # Ip6MulticastGlobal ff0e::1

   HelloInterval 6.0
   HelloValidityTime 600.0
   TcInterval 0.5
   TcValidityTime 300.0
   MidInterval 10.0
   MidValidityTime 300.0
   HnaInterval 10.0
   HnaValidityTime 300.0
   # Weight 0
   # LinkQualityMult 192.168.0.1 0.5
   }


Tambahkan untuk Plugin txtinfo 

LoadPlugin "olsrd_txtinfo.so.0.1"
   {
   PlParam "port" "8080"
   PlParam "Host" "127.0.0.1"
   # PlParam "Net" "0.0.0.0 0.0.0.0"
   # PlParam "Host" "80.23.53.22"
   # # PlParam "Net" "192.168.0.0 255.255.0.0"  
   }


Kadang kala pada saat kita jalankan olsrd akan melaporan error, buang LinkQualityDijkstraLimit dan LinkQualityWinSize di olsrd.conf. Caranya edit 

vi /etc/olsrd.conf

Remark line 124 

# LinkQualityDijkstraLimit 3 3.0

Remark line 240 

# LinkQualityWinSize    100

Cek konfigurasi

Sebaiknya cek konfigurasi menggunakan perintah 

sudo olsrd -d 2

atau bagi yang menginstall menggunakan apt-get bisa 

sudo olsrd -d 2 -f /etc/olsrd/olsrd.conf

Kayanya menggunakan apt-get ada beberapa error, di beri # aja di line yang error. Biasanya setelah di # error yang ada maka olsrd akan jalan.

IPv6

Menjalankan OLSR Untuk IPv6 

sudo olsrd -d 2 -ipv6

Edit Interface

Kita dapat melakukannya menggunakan

  • iwconfig di console
  • edit /etc/network/interface

Dengan asumsi eth1 adalah interface wireless. Edit di console 

iwconfig wlan0 mode ad-hoc
iwconfig wlan0 essid MESH
iwconfig wlan0 ap 02:ca:ff:ee:ba:be
iwconfig wlan0 channel 1
ifconfig wlan0 10.1.1.1
ifconfig wlan0 netmask 255.0.0.0

atau 

iwconfig wlan0 mode ad-hoc essid MESH ap 02:ca:ff:ee:ba:be channel 1
ifconfig wlan0 10.1.1.1 netmask 255.0.0.0


Edit 

vi /etc/network/interfaces

Isi kira-kira sebagi berikut 

   auto lo
   iface lo inet loopback

   auto wlan0
   allow-hot plug wlan0
   iface wlan0 inet static
   address 10.1.1.1
   broadcast 10.255.255.255
   netmask 255.0.0.0
   wireless-mode ad-hoc
   wireless-channel 1
   wireless-essid MESH
   wireless-bssid 02:ca:ff:ee:ba:be

   auto wlan0
   allow-hot plug wlan0
   iface wlan0 inet static
   address 10.10.10.11
   netmask 255.255.255.0
   wireless-mode ad-hoc
   wireless-channel 11
   wireless-key s:12345
   wireless-essid mesh

   #auto eth0
   #iface eth0 inet dhcp
   
   # Konfigurasi IPv6
   iface wlan0 inet6 static
   address 2001:123:127::127
   netmask 128
   wireless-mode ad-hoc
   wireless-channel 1
   wireless-essid MESH
   wireless-bssid 02:ca:ff:ee:ba:be

Restart Networking

networking and OLSR 

sudo /etc/init.d/networking restart
sudo /etc/init.d/olsrd start


Jika pada saat melakukan 

sudo /etc/init.d/network restart

Keluar error berikut 

Error for wireless request "Set Mode" (8B06) :
SET failed on device wlan0 ; Invalid argument.
Error for wireless request "Set Mode" (8B06) :
SET failed on device wlan0 ; Device or resource busy.

Kemungkinan wireless interface / hardware yang anda gunakan tidak mendukung mode ad-hoc. Kita perlu menggunakan USB wireless card lain.

Verifikasi Jaringan

Asumsinya eth1 adalah interface WLAN. 

ifconfig eth1

eth1      Link encap:Ethernet  HWaddr 00:21:00:50:a3:90  
          inet addr:172.16.1.2  Bcast:172.16.255.255  Mask:255.255.0.0
          inet6 addr: fe80::221:ff:fe50:a390/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:52 errors:0 dropped:0 overruns:0 frame:188
          TX packets:88 errors:11 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:3356 (3.3 KB)  TX bytes:14387 (14.3 KB)
          Interrupt:17

Cek wireless 

iwconfig eth1

eth1      IEEE 802.11bg  ESSID:"MESH"  
          Mode:Ad-Hoc  Frequency:2.412 GHz  Cell: 02:CA:FF:EE:BA:BE   
          Bit Rate=54 Mb/s   Tx-Power:24 dBm   
          Retry min limit:7   RTS thr:off   Fragment thr:off
          Power Management:off
          Link Quality=5/5  Signal level=-21 dBm  Noise level=-57 dBm
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0

Cek Routing 

netstat -nr

Kernel IP routing table
Destination     Gateway         Genmask         Flags   MSS Window  irtt Iface
0.0.0.0         172.16.1.1      0.0.0.0         UG        0 0          0 eth1
172.16.0.0      0.0.0.0         255.255.0.0     U         0 0          0 eth1
172.16.1.1      172.16.1.1      255.255.255.255 UGH       0 0          0 eth1
172.16.1.2      172.16.1.2      255.255.255.255 UGH       0 0          0 eth1

Perhatikan host dengan netmask 255.255.255.255, ini merupakan host yang di tambahkan secara automatis oleh OLSR.

Referensi

Pranala Menarik

Retrieved from "https://lms.onnocenter.or.id/wiki/index.php?title=OLSR_-_di_Ubuntu&oldid=44268"