Cisco: Konfigurasi Dasar: Difference between revisions

From OnnoCenterWiki
Jump to navigationJump to search
Onnowpurbo (talk | contribs)
69,477 edits
Onnowpurbo (talk | contribs)
69,477 edits
New page: Sumber: http://www.cisco.com/c/en/us/td/docs/routers/access/1800/1801/software/configuration/guide/scg/routconf.html#65645 ==Configure Global Parameters== Perform these steps to configu...
 
Onnowpurbo (talk | contribs)
69,477 edits
 
(5 intermediate revisions by the same user not shown)
Line 3: Line 3:


==Configure Global Parameters==
==Configure Global Parameters==
Perform these steps to configure selected global parameters for your router:
Command
Purpose
Step 1
configure terminal
Example:


  Router> enable
  Router> enable
  Router# configure terminal
  Router# configure terminal
  Router(config)#
  Router(config)#
Enters global configuration mode, when using the console port.
If you are connecting to the router using a remote terminal, use the following:
telnet router name or address
Login: login id
Password: *********
Router> enable
Step 2
hostname name
Example:


  Router(config)# hostname Router
  Router(config)# hostname Router
  Router(config)#
  Router(config)#
Specifies the name for the router.
Step 3
enable secret password


Example:
  Router(config)# no ip domain-lookup
 
  Router(config)# enable secret cr1ny5ho
  Router(config)#
  Router(config)#
Specifies an encrypted password to prevent unauthorized access to the router.
Step 4
no ip domain-lookup
Example:
Router(config)# no ip domain-lookup Router(config)#


==Configure the Fast Ethernet WAN Interface==
==Configure the Fast Ethernet WAN Interface==


This procedure applies only to the Cisco 1811 and Cisco 1812 router models. Perform these steps to configure the Fast Ethernet interfaces, beginning in global configuration mode.
Command
Purpose
Step 1
interface type number
Example:


  Router(config)# interface fastethernet 0
  Router(config)# interface fastethernet 0
  Router(config-int)#
  Router(config-int)#
   
   
Enters the configuration mode for a Fast Ethernet WAN interface on the router.
Note Fast Ethernet WAN ports are numbered 0–1 on the Cisco 1800 series routers.
Step 2
ip address ip-address mask
Example:
  Router(config-int)# ip address 192.1.12.2 255.255.255.0
  Router(config-int)# ip address 192.1.12.2 255.255.255.0
  Router(config-int)#
  Router(config-int)#
   
   
Sets the IP address and subnet mask for the specified Fast Ethernet interface.
Step 3
no shutdown
Example:


  Router(config-int)# no shutdown
  Router(config-int)# no shutdown
  Router(config-int)#
  Router(config-int)#
   
   
Router(config-int)# exit
Router(config)#


Enables the Ethernet interface, changing its state from administratively down to administratively up.


Step 4
==Konfigurasi Routing==


exit
Router(config)# ip route 192.168.1.0 255.255.0.0 10.10.10.2
Router(config)#


Example:
  Router(config)# end
  Router(config-int)# exit
  Router#
  Router(config)#  
 
==Menyimpan Konfigurasi==


show running-config
copy running-config startup-config
write memory


==Referensi==
==Referensi==


* http://www.cisco.com/c/en/us/td/docs/routers/access/1800/1801/software/configuration/guide/scg/routconf.html#65645
* http://www.cisco.com/c/en/us/td/docs/routers/access/1800/1801/software/configuration/guide/scg/routconf.html#65645
==Pranala Menarik==
* [[TCP/IP: Advanced Routing]]
* [[Quagga]]
* [[Mikrotik]]
* [[Cisco]]
* [[Juniper]]
* [[BIRD: Routing]]
* [[IPv6]]

Latest revision as of 11:01, 28 December 2018

Sumber: http://www.cisco.com/c/en/us/td/docs/routers/access/1800/1801/software/configuration/guide/scg/routconf.html#65645


Configure Global Parameters

Router> enable
Router# configure terminal
Router(config)#

Router(config)# hostname Router
Router(config)#

Router(config)# no ip domain-lookup
Router(config)#

Configure the Fast Ethernet WAN Interface

Router(config)# interface fastethernet 0
Router(config-int)#

Router(config-int)# ip address 192.1.12.2 255.255.255.0
Router(config-int)#


Router(config-int)# no shutdown
Router(config-int)#

Router(config-int)# exit
Router(config)#


Konfigurasi Routing

Router(config)# ip route 192.168.1.0 255.255.0.0 10.10.10.2
Router(config)#

Router(config)# end
Router#

Menyimpan Konfigurasi

show running-config
copy running-config startup-config
write memory

Referensi

Pranala Menarik

Retrieved from "https://lms.onnocenter.or.id/wiki/index.php?title=Cisco:_Konfigurasi_Dasar&oldid=53841"