Teknik Mengkonfigurasi IP address

Ubuntu 20.04

Edit

vi /etc/netplan/00-installer-config.yaml

Contoh isi:

# This is the network config written by 'subiquity'
network:
  ethernets:
    enp0s3:
      dhcp4: true
  version: 2

Untuk IP Static

network:
  version: 2
  ethernets:
    enp0s3:
      addresses: [192.168.20.160/24]
      gateway4: 192.168.20.2
      nameservers:
        addresses: [192.168.20.2, 8.8.8.8]

Kemudian lakukan

sudo netplan apply
sudo reboot

Ubuntu <18.04

Edit file /etc/network/interfaces

# vi /etc/network/interfaces

Contoh isi

IP Dynamic

iface eth0 inet dhcp

IP Static

iface eth0 inet static
address 192.168.0.2
netmask 255.255.255.0
gateway 192.168.0.1

IPv6

### Start IPV6 static configuration
iface eth0 inet6 static
pre-up modprobe ipv6
address 2607:f0d0:2001:000a:0000:0000:0000:0010
netmask 64
gateway 2607:f0d0:2001:000a:0000:0000:0000:0001
### END IPV6 configuration

Pranala Menarik

• Linux Howto
• Mengkonfigurasi Interface di Ubuntu Shell