Open5gs: docker: Difference between revisions

From OnnoCenterWiki
Jump to navigationJump to search
← Older edit
Unknown user (talk)
No edit summary
 
(23 intermediate revisions by the same user not shown)
Line 1: Line 1:
Sumber: https://github.com/herlesupreeth/docker_open5gs
Sumber: https://github.com/herlesupreeth/docker_open5gs


 
Berbeda dengan nama repositorinya, repositori ini berisi file buruh docker untuk deploy jaringan 4G/5G simulasi Over-The-Air (OTA) atau RF menggunakan proyek berikut:
Quite contrary to the name of the repository, this repository contains docker files to deploy an Over-The-Air (OTA) or RF simulated 4G/5G network using following projects:


* Core Network (4G/5G) - open5gs - https://github.com/open5gs/open5gs
* Core Network (4G/5G) - open5gs - https://github.com/open5gs/open5gs
Line 12: Line 11:
* UERANSIM (5G) - https://github.com/aligungr/UERANSIM
* UERANSIM (5G) - https://github.com/aligungr/UERANSIM


==Tested Setup==
==Test Setup==
 
Docker host machine
Docker host machine
* Ubuntu 20.04 or 22.04
* Ubuntu 20.04 or 22.04


Over-The-Air setups:
Over-The-Air (OTA) setup:
* srsRAN (eNB/gNB) using Ettus USRP B210
* srsRAN (eNB/gNB) menggunakan Ettus USRP B210
* srsRAN eNB using LimeSDR Mini v1.3
* srsRAN eNB menggunakan LimeSDR Mini v1.3
* srsRAN eNB using LimeSDR-USB
* srsRAN eNB menggunakan LimeSDR-USB


RF simulated setups:
RF simulasi setup:
* srsRAN (gNB + UE) simulation over ZMQ
* srsRAN (gNB + UE) simulasi menggunakan ZMQ
* UERANSIM (gNB + UE) simulator
* UERANSIM (gNB + UE) simulator
Build and Execution Instructions
Mandatory requirements:
docker-ce - Version 22.0.5 or above
docker-compose - Version 2.14 or above




==Statik IP==
Persyaratan wajib:
docker-ce - Version 22.0.5 atau yang lebih tinggi
docker-compose - Version 2.14 atau yang lebih tinggi
 
 
==Setup IP Statik==


Edit
Edit
sudo su
apt update
apt -y install net-tools


  vi /etc/netplan/00-installer-config.yaml
  vi /etc/netplan/00-installer-config.yaml
Line 50: Line 56:
     renderer: networkd
     renderer: networkd
     ethernets:
     ethernets:
         enp0s3:
         enp0s31f6:
             addresses:
             addresses:
                 - 192.168.0.5/24
                 - 192.168.0.5/24
Line 58: Line 64:
                 - to: default
                 - to: default
                   via: 192.168.0.222
                   via: 192.168.0.222
==Install docker==
Install pendukung
sudo apt update
sudo apt upgrade
sudo apt -y install apt-transport-https ca-certificates curl software-properties-common
Add GPG Key Docker Repo & Sources List
curl -fsSL https://download.docker.com/linux/ubuntu/gpg | sudo gpg --dearmor -o /usr/share/keyrings/docker-archive-keyring.gpg
echo "deb [arch=$(dpkg --print-architecture) signed-by=/usr/share/keyrings/docker-archive-keyring.gpg] https://download.docker.com/linux/ubuntu $(lsb_release -cs) stable" | sudo tee /etc/apt/sources.list.d/docker.list > /dev/null
sudo apt update
Install
sudo apt -y install docker-ce docker-compose




==Install==
==Install==


Clone repository and build base docker image of open5gs, kamailio, ueransim
Clone repositori dan buat image docker dari open5gs, kamailio, ueransim


sudo su
  cd /usr/local/src/
  cd /usr/local/src/
  git clone https://github.com/herlesupreeth/docker_open5gs
  git clone https://github.com/herlesupreeth/docker_open5gs
  cd docker_open5gs/base
  cd /usr/local/src/docker_open5gs/base
  docker build --no-cache --force-rm -t docker_open5gs .
  docker build --no-cache --force-rm -t docker_open5gs .


  cd ../ims_base
  cd /usr/local/src/docker_open5gs/ims_base
  docker build --no-cache --force-rm -t docker_kamailio .
  docker build --no-cache --force-rm -t docker_kamailio .


  cd ../srslte
  cd /usr/local/src/docker_open5gs/srslte
  docker build --no-cache --force-rm -t docker_srslte .
  docker build --no-cache --force-rm -t docker_srslte .


  cd ../srsran
  cd /usr/local/src/docker_open5gs/srsran
  docker build --no-cache --force-rm -t docker_srsran .
  docker build --no-cache --force-rm -t docker_srsran .


  cd ../ueransim
  cd /usr/local/src/docker_open5gs/ueransim
  docker build --no-cache --force-rm -t docker_ueransim .
  docker build --no-cache --force-rm -t docker_ueransim .


Build and Run using docker-compose
Build dan Run menggunakan docker-compose
 
sudo su
apt-get install -y linux-tools-common linux-tools-6.2.0-32-generic linux-cloud-tools-6.2.0-32-generic linux-tools-generic linux-cloud-tools-generic


  cd ..
  cd /usr/local/src/docker_open5gs/
  set -a
  set -a
  source .env
  source .env
Line 91: Line 123:
  sudo sysctl -w net.ipv4.ip_forward=1
  sudo sysctl -w net.ipv4.ip_forward=1
  sudo cpupower frequency-set -g performance
  sudo cpupower frequency-set -g performance
==Deployment==


4G deployment
4G deployment
cd /usr/local/src/docker_open5gs/


  # 4G Core Network + IMS + SMS over SGs
  # 4G Core Network + IMS + SMS over SGs
Line 107: Line 143:


5G SA deployment
5G SA deployment
cd /usr/local/src/docker_open5gs/


  # 5G Core Network
  # 5G Core Network
Line 126: Line 164:
  docker-compose -f nr-ue.yaml up -d && docker container attach nr_ue
  docker-compose -f nr-ue.yaml up -d && docker container attach nr_ue


Configuration
==Konfigurasi==
For the quick run (eNB/gNB, CN in same docker network), edit only the following parameters in .env as per your setup
 
Untuk quick run (eNB/gNB, CN berada dalam docker network yang sama), edit hanya parameter berikut di .env sesuai setup kita
 
cd /usr/local/src/docker_open5gs
vi .env
 
Parametery yang di ubah,
 
* MCC
* MNC
* TEST_NETWORK --> Ubah ini hanya jika bentrok dengan jaringan internal di rumah/kantor Anda
* DOCKER_HOST_IP --> Ini adalah alamat IP dari host yang menjalankan pengaturan docker Anda
* SGWU_ADVERTISE_IP --> Ubah ini ke nilai DOCKER_HOST_IP yang ditetapkan di atas hanya jika eNB tidak menjalankan jaringan/host docker yang sama
* UPF_ADVERTISE_IP --> Ubah ini ke nilai DOCKER_HOST_IP yang ditetapkan di atas hanya jika gNB tidak menjalankan jaringan/host docker yang sama
* UE_IPV4_INTERNET --> Ubah ini ke rentang ip jaringan UE yang Anda inginkan (agar tidak konflik) untuk APN internet
* UE_IPV4_IMS --> Ubah ini ke rentang ip jaringan UE yang Anda inginkan (agar tidak konflik) untuk ims APN
 
Jika eNB/gNB TIDAK berjalan di jaringan/host docker yang sama dengan host yang menjalankan Core/IMS yang melakukan docker, ikuti langkah-langkah tambahan di bawah ini
 
===Contoh .env===
 
vi /usr/local/src/docker_open5gs/.env
 
MCC=001
MNC=01
TEST_NETWORK=172.22.0.0/24
DOCKER_HOST_IP=192.168.0.5
UE_IPV4_INTERNET=10.45.0.0/24
UE_IPV4_IMS=10.46.0.0/24
# SGW
SGWC_IP=172.22.0.5
SGWU_IP=172.22.0.6
SGWU_ADVERTISE_IP=172.22.0.6
# SMF
SMF_IP=172.22.0.7
SMF_DNS1=8.8.8.8
SMF_DNS2=8.8.4.4
# UPF
UPF_IP=172.22.0.8
UPF_ADVERTISE_IP=172.22.0.8
 
Alternatif contoh
 
vi /usr/local/src/docker_open5gs/.env


  MCC
  MCC=999
  MNC
  MNC=70
  TEST_NETWORK --> Change this only if it clashes with the internal network at your home/office
  TEST_NETWORK=172.22.0.0/24
  DOCKER_HOST_IP --> This is the IP address of the host running your docker setup
  DOCKER_HOST_IP=192.168.0.5
  SGWU_ADVERTISE_IP --> Change this to value of DOCKER_HOST_IP set above only if eNB is not running the same docker network/host
UE_IPV4_INTERNET=10.45.0.0/24
  UPF_ADVERTISE_IP --> Change this to value of DOCKER_HOST_IP set above only if gNB is not running the same docker network/host
UE_IPV4_IMS=10.46.0.0/24
  UE_IPV4_INTERNET --> Change this to your desired (Not conflicted) UE network ip range for internet APN
# SGW
  UE_IPV4_IMS --> Change this to your desired (Not conflicted) UE network ip range for ims APN
SGWC_IP=172.22.0.5
SGWU_IP=172.22.0.6
  SGWU_ADVERTISE_IP=172.22.0.6
# SMF
SMF_IP=172.22.0.7
SMF_DNS1=8.8.8.8
SMF_DNS2=8.8.4.4
# UPF
UPF_IP=172.22.0.8
  UPF_ADVERTISE_IP=172.22.0.8
# UERANSIM
NR_GNB_IP=172.22.0.23
NR_UE_IP=172.22.0.24
UE1_IMEI=356938035643803
UE1_IMEISV=4370816125816151
UE1_IMSI=999701234567895
UE1_KI=11111111111111111111111111111111
  UE1_OP=11111111111111111111111111111111
  UE1_AMF=8000


If eNB/gNB is NOT running in the same docker network/host as the host running the dockerized Core/IMS then follow the below additional steps
===4G deployment===


4G deployment
Di bawah mme section di docker compose file (4g-volte-deploy.yaml), uncomment bagian berikut,
Under mme section in docker compose file (4g-volte-deploy.yaml), uncomment the following part


  ...
  ...
Line 148: Line 248:
  ...
  ...


Then, uncomment the following part under sgwu section
Kemudian, uncomment bagian berikut di bawah sgwu section


  ...
  ...
Line 155: Line 255:
  ...
  ...


5G SA deployment
===5G SA deployment===
Under amf section in docker compose file (sa-deploy.yaml), uncomment the following part
 
Di bawah amf section di docker compose file (sa-deploy.yaml), uncomment bagian berikut,


  ...
  ...
Line 163: Line 264:
  ...
  ...


Then, uncomment the following part under upf section
Kemudian, uncomment bagian berikut dibawah upf section


  ...
  ...
Line 170: Line 271:
  ...
  ...


Provisioning of SIM information
==Provisioning SIM information==
Provisioning of SIM information in open5gs HSS as follows:
 
Open (http://<DOCKER_HOST_IP>:3000) in a web browser, where <DOCKER_HOST_IP> is the IP of the machine/VM running the open5gs containers. Login with following credentials
Provisioning SIM information di open5gs HSS sebagai berikut:
 
* Buka (http://<DOCKER_HOST_IP>:3000) di web browser, dimana <DOCKER_HOST_IP> adalah IP dari machine/VM yang menjalankan open5gs container. Login dengan credential berikut,


  Username : admin
  Username : admin
  Password : 1423
  Password : 1423


Using Web UI, add a subscriber
* Gunakan Web UI, tambahkan subscriber
 
Provisioning IMSI dan MSISDN dengan OsmoHLR sebagai berikut,
 
* Pertama-tama, login ke osmohlr container


Provisioning of IMSI and MSISDN with OsmoHLR as follows:
docker exec -it osmohlr /bin/bash
First, login to the osmohlr container
docker exec -it osmohlr /bin/bash
Then, telnet to localhost


  $ telnet localhost 4258
* Kemudian, telnet ke localhost
 
  telnet localhost 4258


  OsmoHLR> enable
  OsmoHLR> enable
  OsmoHLR#
  OsmoHLR#


Finally, register the subscriber information as in following example:
* Akhirnya, register subscriber information contoh berikut,


  OsmoHLR# subscriber imsi 001010123456790 create
  OsmoHLR# subscriber imsi 001010123456790 create
  OsmoHLR# subscriber imsi 001010123456790 update msisdn 9076543210
  OsmoHLR# subscriber imsi 001010123456790 update msisdn 9076543210


Replace IMSI and MSISDN as per your programmed SIM
* Ganti IMSI dan MSISDN seperti SIM yang kita program.


Provisioning of SIM information in pyHSS is as follows:
Provisioning SIM information di pyHSS sebagai berikut,
Goto http://172.22.0.18:8080/docs/
 
Select apn -> Create new APN -> Press on Try it out. Then, in payload section use the below JSON and then press Execute
* Akses  http://172.22.0.18:8080/docs/
* Pilih apn -> Create new APN -> Press Try it out. Kemudian, di payload section gunakan contoh JSON berikut dan tekan Execute


  {
  {
Line 206: Line 313:
  }
  }


Take note of apn_id specified in Response body under Server response for internet APN
* Catat apn_id yang di set di Response body dibawah Server response untuk internet APN
 
* Ulangi creation step untuk payload berikut,
Repeat creation step for following payload


  {
  {
Line 216: Line 322:
  }
  }


Take note of apn_id specified in Response body under Server response for ims APN
* Catat apn_id yang di set di Response body dibawah Server response untuk ims APN
* Execute this step of APN creation only once


Execute this step of APN creation only once
Selanjutnya, select auc -> Create new AUC -> Press Try it out. Kemudian, di payload section gunakan contoh JSON berikut untuk mengisi ki, opc dan amf untuk SIM dan press Execute
 
Next, select auc -> Create new AUC -> Press on Try it out. Then, in payload section use the below example JSON to fill in ki, opc and amf for your SIM and then press Execute


  {
  {
Line 230: Line 335:
  }
  }


Take note of auc_id specified in Response body under Server response
* Catat auc_id yang di set di Response body dibawah Server response
* Ganti imsi, ki, opc dan amf sesuai yang kita ingin program ke SIM


Replace imsi, ki, opc and amf as per your programmed SIM
Selanjutnya, select subscriber -> Create new SUBSCRIBER -> Press Try it out. Selanjutnya, di payload section gunakan contoh JSON berikut untuk mengisi in imsi, auc_id dan apn_list untuk SIM dan press Execute
 
Next, select subscriber -> Create new SUBSCRIBER -> Press on Try it out. Then, in payload section use the below example JSON to fill in imsi, auc_id and apn_list for your SIM and then press Execute


  {
  {
Line 247: Line 351:
  }
  }


auc_id is the ID of the AUC created in the previous steps
* auc_id adalah ID untuk AUC dibuat di tahap sebelumnya.
default_apn is the ID of the internet APN created in the previous steps
* default_apn adalah ID untuk internet APN dibuat di tahap sebelumnya
apn_list is the comma separated list of APN IDs allowed for the UE i.e. APN ID for internet and ims APN created in the previous steps
* apn_list adalah comma separated list dari APN ID yang diijinkan untuk UE i.e. APN ID untuk internet dan ims APN dibuat di tahap sebelumnya
Replace imsi and msisdn as per your programmed SIM
* Ganti imsi dan msisdn sesuai dengan SIM yang kita program


Finally, select ims_subscriber -> Create new IMS SUBSCRIBER -> Press on Try it out. Then, in payload section use the below example JSON to fill in imsi, msisdn, msisdn_list, scscf_peer, scscf_realm and scscf for your SIM/deployment and then press Execute
Akhirnya, select ims_subscriber -> Create new IMS SUBSCRIBER -> Press Try it out. Selanjutnya, di payload section gunakan contoh JSON berikut untuk mengisi imsi, msisdn, msisdn_list, scscf_peer, scscf_realm dan scscf untuk SIM/deployment dan press Execute


  {
  {
Line 265: Line 369:
  }
  }


Replace imsi, msisdn and msisdn_list as per your programmed SIM
* Ganti imsi, msisdn dan msisdn_list sesuai dengan SIM yang kita program.
* Ganti scscf_peer, scscf dan scscf_realm seperti deployment kita
 
==Error==
 
===Error Deploy Open5GS CN===
 
error di 4G
 
pcscf        | 96(152) INFO: cdp [receiver.c:874]: peer_connect(): peer_connect(): Trying to connect to 172.22.0.4 port 3873
scscf        |  5(61) DEBUG: ims_dialog [dlg_handlers.c:1923]: print_all_dlgs(): ******************** 5(61) DEBUG: ims_dialog [dlg_handlers.c:1924]: print_all_dlgs(): printing 4096 dialogs
scscf        |  5(61) DEBUG: ims_dialog [dlg_handlers.c:1934]: print_all_dlgs(): ******************** 5(61) DEBUG: ims_auth [authorize.c:187]: reg_await_timer(): Looking for expired/useless at 72428826
scscf        |  5(61) DEBUG: ims_auth [authorize.c:232]: reg_await_timer(): [DONE] Looking for expired/useless at 72428826
pcscf        | 96(152) ERROR: cdp [receiver.c:922]: peer_connect(): peer_connect(): Error opening connection to to 172.22.0.4 port 3873 >No route to host
 
sesudah install ulang, masih error tapi beda ... masih di CDP yang error
 
 
osmohlr      | 20230912041343980 DLINP <000b> input/ipa.c:447 connected read/write
osmohlr      | 20230912041343980 DLINP <000b> input/ipa.c:403 172.22.0.31:33545 message received
icscf        | 28(58) ERROR: cdp [receiver.c:922]: peer_connect(): peer_connect(): Error opening connection to to 172.22.0.18 port 3875 >No route to host
scscf        | 28(62) ERROR: cdp [receiver.c:922]: peer_connect(): peer_connect(): Error opening connection to to 172.22.0.18 port 3875 >No route to host
 
 
 
 
===Error deploy SRSLTE===
 
 
uhd_usrp_probe


Replace scscf_peer, scscf and scscf_realm as per your deployment
[INFO] [UHD] linux; GNU C++ version 11.2.0; Boost_107400; UHD_4.1.0.5-3
[WARNING] [B200] EnvironmentError: IOError: Could not find path for image: usrp_b200_fw.hex
Using images directory: <no images directory located>
Set the environment variable 'UHD_IMAGES_DIR' appropriately or follow the below instructions to download the images package.
Please run:
  "/lib/x86_64-linux-gnu/uhd/utils/uhd_images_downloader.py"
Error: LookupError: KeyError: No devices found for ----->
Empty Device Address


==Referensi==
==Referensi==


* https://github.com/herlesupreeth/docker_open5gs
* https://github.com/herlesupreeth/docker_open5gs

Latest revision as of 21:18, 11 September 2023

Sumber: https://github.com/herlesupreeth/docker_open5gs

Berbeda dengan nama repositorinya, repositori ini berisi file buruh docker untuk deploy jaringan 4G/5G simulasi Over-The-Air (OTA) atau RF menggunakan proyek berikut:

Test Setup

Docker host machine

  • Ubuntu 20.04 or 22.04

Over-The-Air (OTA) setup:

  • srsRAN (eNB/gNB) menggunakan Ettus USRP B210
  • srsRAN eNB menggunakan LimeSDR Mini v1.3
  • srsRAN eNB menggunakan LimeSDR-USB

RF simulasi setup:

  • srsRAN (gNB + UE) simulasi menggunakan ZMQ
  • UERANSIM (gNB + UE) simulator


Persyaratan wajib: 

docker-ce - Version 22.0.5 atau yang lebih tinggi
docker-compose - Version 2.14 atau yang lebih tinggi


Setup IP Statik

Edit 

sudo su
apt update
apt -y install net-tools



vi /etc/netplan/00-installer-config.yaml

Pastikan, 

# This is the network config written by 'subiquity'
# network:
#   ethernets:
#     enp0s31f6:
#       dhcp4: true
#   version: 2
#

network:
    version: 2
    renderer: networkd
    ethernets:
        enp0s31f6:
            addresses:
                - 192.168.0.5/24
            nameservers:
                addresses: [8.8.8.8, 8.8.4.4]
            routes:
                - to: default
                  via: 192.168.0.222

Install docker

Install pendukung 

sudo apt update
sudo apt upgrade
sudo apt -y install apt-transport-https ca-certificates curl software-properties-common

Add GPG Key Docker Repo & Sources List 

curl -fsSL https://download.docker.com/linux/ubuntu/gpg | sudo gpg --dearmor -o /usr/share/keyrings/docker-archive-keyring.gpg

echo "deb [arch=$(dpkg --print-architecture) signed-by=/usr/share/keyrings/docker-archive-keyring.gpg] https://download.docker.com/linux/ubuntu $(lsb_release -cs) stable" | sudo tee /etc/apt/sources.list.d/docker.list > /dev/null

sudo apt update

Install 

sudo apt -y install docker-ce docker-compose



Install

Clone repositori dan buat image docker dari open5gs, kamailio, ueransim 

sudo su
cd /usr/local/src/
git clone https://github.com/herlesupreeth/docker_open5gs
cd /usr/local/src/docker_open5gs/base
docker build --no-cache --force-rm -t docker_open5gs .

cd /usr/local/src/docker_open5gs/ims_base
docker build --no-cache --force-rm -t docker_kamailio .

cd /usr/local/src/docker_open5gs/srslte
docker build --no-cache --force-rm -t docker_srslte .

cd /usr/local/src/docker_open5gs/srsran
docker build --no-cache --force-rm -t docker_srsran .

cd /usr/local/src/docker_open5gs/ueransim
docker build --no-cache --force-rm -t docker_ueransim .

Build dan Run menggunakan docker-compose 

sudo su
apt-get install -y linux-tools-common linux-tools-6.2.0-32-generic linux-cloud-tools-6.2.0-32-generic linux-tools-generic linux-cloud-tools-generic

cd /usr/local/src/docker_open5gs/
set -a
source .env
sudo ufw disable
docker-compose -f 4g-volte-deploy.yaml build
docker-compose -f sa-deploy.yaml build
sudo sysctl -w net.ipv4.ip_forward=1
sudo cpupower frequency-set -g performance

Deployment

4G deployment 

cd /usr/local/src/docker_open5gs/

# 4G Core Network + IMS + SMS over SGs
docker-compose -f 4g-volte-deploy.yaml up

# srsRAN eNB using SDR (OTA)
docker-compose -f srsenb.yaml up -d && docker container attach srsenb

# srsRAN ZMQ eNB (RF simulated)
docker-compose -f srsenb_zmq.yaml up -d && docker container attach srsenb_zmq

# srsRAN ZMQ 4G UE (RF simulated)
docker-compose -f srsue_zmq.yaml up -d && docker container attach srsue_zmq

5G SA deployment 

cd /usr/local/src/docker_open5gs/

# 5G Core Network
docker-compose -f sa-deploy.yaml up

# srsRAN gNB using SDR (OTA)
docker-compose -f srsgnb.yaml up -d && docker container attach srsgnb

# srsRAN ZMQ gNB (RF simulated)
docker-compose -f srsgnb_zmq.yaml up -d && docker container attach srsgnb_zmq

# srsRAN ZMQ 5G UE (RF simulated)
docker-compose -f srsue_5g_zmq.yaml up -d && docker container attach srsue_5g_zmq

# UERANSIM gNB (RF simulated)
docker-compose -f nr-gnb.yaml up -d && docker container attach nr_gnb

# UERANSIM NR-UE (RF simulated)
docker-compose -f nr-ue.yaml up -d && docker container attach nr_ue

Konfigurasi

Untuk quick run (eNB/gNB, CN berada dalam docker network yang sama), edit hanya parameter berikut di .env sesuai setup kita 

cd /usr/local/src/docker_open5gs
vi .env

Parametery yang di ubah,

  • MCC
  • MNC
  • TEST_NETWORK --> Ubah ini hanya jika bentrok dengan jaringan internal di rumah/kantor Anda
  • DOCKER_HOST_IP --> Ini adalah alamat IP dari host yang menjalankan pengaturan docker Anda
  • SGWU_ADVERTISE_IP --> Ubah ini ke nilai DOCKER_HOST_IP yang ditetapkan di atas hanya jika eNB tidak menjalankan jaringan/host docker yang sama
  • UPF_ADVERTISE_IP --> Ubah ini ke nilai DOCKER_HOST_IP yang ditetapkan di atas hanya jika gNB tidak menjalankan jaringan/host docker yang sama
  • UE_IPV4_INTERNET --> Ubah ini ke rentang ip jaringan UE yang Anda inginkan (agar tidak konflik) untuk APN internet
  • UE_IPV4_IMS --> Ubah ini ke rentang ip jaringan UE yang Anda inginkan (agar tidak konflik) untuk ims APN

Jika eNB/gNB TIDAK berjalan di jaringan/host docker yang sama dengan host yang menjalankan Core/IMS yang melakukan docker, ikuti langkah-langkah tambahan di bawah ini

Contoh .env

vi /usr/local/src/docker_open5gs/.env

MCC=001
MNC=01
TEST_NETWORK=172.22.0.0/24
DOCKER_HOST_IP=192.168.0.5
UE_IPV4_INTERNET=10.45.0.0/24
UE_IPV4_IMS=10.46.0.0/24
# SGW
SGWC_IP=172.22.0.5
SGWU_IP=172.22.0.6
SGWU_ADVERTISE_IP=172.22.0.6
# SMF
SMF_IP=172.22.0.7
SMF_DNS1=8.8.8.8
SMF_DNS2=8.8.4.4
# UPF
UPF_IP=172.22.0.8
UPF_ADVERTISE_IP=172.22.0.8

Alternatif contoh 

vi /usr/local/src/docker_open5gs/.env

MCC=999
MNC=70
TEST_NETWORK=172.22.0.0/24
DOCKER_HOST_IP=192.168.0.5
UE_IPV4_INTERNET=10.45.0.0/24
UE_IPV4_IMS=10.46.0.0/24
# SGW
SGWC_IP=172.22.0.5
SGWU_IP=172.22.0.6
SGWU_ADVERTISE_IP=172.22.0.6
# SMF
SMF_IP=172.22.0.7
SMF_DNS1=8.8.8.8
SMF_DNS2=8.8.4.4
# UPF
UPF_IP=172.22.0.8
UPF_ADVERTISE_IP=172.22.0.8

# UERANSIM
NR_GNB_IP=172.22.0.23
NR_UE_IP=172.22.0.24

UE1_IMEI=356938035643803
UE1_IMEISV=4370816125816151
UE1_IMSI=999701234567895
UE1_KI=11111111111111111111111111111111
UE1_OP=11111111111111111111111111111111
UE1_AMF=8000

4G deployment

Di bawah mme section di docker compose file (4g-volte-deploy.yaml), uncomment bagian berikut, 

...
    # ports:
    #   - "36412:36412/sctp"
...

Kemudian, uncomment bagian berikut di bawah sgwu section 

...
    # ports:
    #   - "2152:2152/udp"
...

5G SA deployment

Di bawah amf section di docker compose file (sa-deploy.yaml), uncomment bagian berikut, 

...
    # ports:
    #   - "38412:38412/sctp"
...

Kemudian, uncomment bagian berikut dibawah upf section 

...
    # ports:
    #   - "2152:2152/udp"
...

Provisioning SIM information

Provisioning SIM information di open5gs HSS sebagai berikut:

  • Buka (http://<DOCKER_HOST_IP>:3000) di web browser, dimana <DOCKER_HOST_IP> adalah IP dari machine/VM yang menjalankan open5gs container. Login dengan credential berikut,
Username : admin
Password : 1423
  • Gunakan Web UI, tambahkan subscriber

Provisioning IMSI dan MSISDN dengan OsmoHLR sebagai berikut,

  • Pertama-tama, login ke osmohlr container
docker exec -it osmohlr /bin/bash
  • Kemudian, telnet ke localhost
telnet localhost 4258

OsmoHLR> enable
OsmoHLR#
  • Akhirnya, register subscriber information contoh berikut,
OsmoHLR# subscriber imsi 001010123456790 create
OsmoHLR# subscriber imsi 001010123456790 update msisdn 9076543210
  • Ganti IMSI dan MSISDN seperti SIM yang kita program.

Provisioning SIM information di pyHSS sebagai berikut,

  • Akses http://172.22.0.18:8080/docs/
  • Pilih apn -> Create new APN -> Press Try it out. Kemudian, di payload section gunakan contoh JSON berikut dan tekan Execute
{
  "apn": "internet",
  "apn_ambr_dl": 0,
  "apn_ambr_ul": 0
}
  • Catat apn_id yang di set di Response body dibawah Server response untuk internet APN
  • Ulangi creation step untuk payload berikut,
{
  "apn": "ims",
  "apn_ambr_dl": 0,
  "apn_ambr_ul": 0
}
  • Catat apn_id yang di set di Response body dibawah Server response untuk ims APN
  • Execute this step of APN creation only once

Selanjutnya, select auc -> Create new AUC -> Press Try it out. Kemudian, di payload section gunakan contoh JSON berikut untuk mengisi ki, opc dan amf untuk SIM dan press Execute 

{
  "ki": "8baf473f2f8fd09487cccbd7097c6862",
  "opc": "8E27B6AF0E692E750F32667A3B14605D",
  "amf": "8000",
  "sqn": 0,
  "imsi": "001010123456790"
}
  • Catat auc_id yang di set di Response body dibawah Server response
  • Ganti imsi, ki, opc dan amf sesuai yang kita ingin program ke SIM

Selanjutnya, select subscriber -> Create new SUBSCRIBER -> Press Try it out. Selanjutnya, di payload section gunakan contoh JSON berikut untuk mengisi in imsi, auc_id dan apn_list untuk SIM dan press Execute 

{
  "imsi": "001010123456790",
  "enabled": true,
  "auc_id": 1,
  "default_apn": 1,
  "apn_list": "0,1",
  "msisdn": "9076543210",
  "ue_ambr_dl": 0,
  "ue_ambr_ul": 0
}
  • auc_id adalah ID untuk AUC dibuat di tahap sebelumnya.
  • default_apn adalah ID untuk internet APN dibuat di tahap sebelumnya
  • apn_list adalah comma separated list dari APN ID yang diijinkan untuk UE i.e. APN ID untuk internet dan ims APN dibuat di tahap sebelumnya
  • Ganti imsi dan msisdn sesuai dengan SIM yang kita program

Akhirnya, select ims_subscriber -> Create new IMS SUBSCRIBER -> Press Try it out. Selanjutnya, di payload section gunakan contoh JSON berikut untuk mengisi imsi, msisdn, msisdn_list, scscf_peer, scscf_realm dan scscf untuk SIM/deployment dan press Execute 

{
    "imsi": "001010123456790",
    "msisdn": "9076543210",
    "sh_profile": "string",
    "scscf_peer": "scscf.ims.mnc001.mcc001.3gppnetwork.org",
    "msisdn_list": "[9076543210]",
    "ifc_path": "default_ifc.xml",
    "scscf": "sip:scscf.ims.mnc001.mcc001.3gppnetwork.org:6060",
    "scscf_realm": "ims.mnc001.mcc001.3gppnetwork.org"
}
  • Ganti imsi, msisdn dan msisdn_list sesuai dengan SIM yang kita program.
  • Ganti scscf_peer, scscf dan scscf_realm seperti deployment kita

Error

Error Deploy Open5GS CN

error di 4G 

pcscf        | 96(152) INFO: cdp [receiver.c:874]: peer_connect(): peer_connect(): Trying to connect to 172.22.0.4 port 3873
scscf        |  5(61) DEBUG: ims_dialog [dlg_handlers.c:1923]: print_all_dlgs(): ******************** 5(61) DEBUG: ims_dialog [dlg_handlers.c:1924]: print_all_dlgs(): printing 4096 dialogs
scscf        |  5(61) DEBUG: ims_dialog [dlg_handlers.c:1934]: print_all_dlgs(): ******************** 5(61) DEBUG: ims_auth [authorize.c:187]: reg_await_timer(): Looking for expired/useless at 72428826
scscf        |  5(61) DEBUG: ims_auth [authorize.c:232]: reg_await_timer(): [DONE] Looking for expired/useless at 72428826
pcscf        | 96(152) ERROR: cdp [receiver.c:922]: peer_connect(): peer_connect(): Error opening connection to to 172.22.0.4 port 3873 >No route to host

sesudah install ulang, masih error tapi beda ... masih di CDP yang error 


osmohlr      | 20230912041343980 DLINP <000b> input/ipa.c:447 connected read/write
osmohlr      | 20230912041343980 DLINP <000b> input/ipa.c:403 172.22.0.31:33545 message received
icscf        | 28(58) ERROR: cdp [receiver.c:922]: peer_connect(): peer_connect(): Error opening connection to to 172.22.0.18 port 3875 >No route to host
scscf        | 28(62) ERROR: cdp [receiver.c:922]: peer_connect(): peer_connect(): Error opening connection to to 172.22.0.18 port 3875 >No route to host



Error deploy SRSLTE

uhd_usrp_probe

[INFO] [UHD] linux; GNU C++ version 11.2.0; Boost_107400; UHD_4.1.0.5-3
[WARNING] [B200] EnvironmentError: IOError: Could not find path for image: usrp_b200_fw.hex
Using images directory: <no images directory located>
Set the environment variable 'UHD_IMAGES_DIR' appropriately or follow the below instructions to download the images package.
Please run:
 "/lib/x86_64-linux-gnu/uhd/utils/uhd_images_downloader.py"
Error: LookupError: KeyError: No devices found for ----->
Empty Device Address

Referensi

Retrieved from "https://lms.onnocenter.or.id/wiki/index.php?title=Open5gs:_docker&oldid=69822"