UBNT: olsr dengan openwrt: Difference between revisions

From OnnoCenterWiki
Jump to navigationJump to search
← Older edit
Onnowpurbo (talk | contribs)
69,477 edits
Onnowpurbo (talk | contribs)
69,477 edits
Onnowpurbo (talk | contribs)
69,477 edits
 
(16 intermediate revisions by the same user not shown)
Line 9: Line 9:
* Ubiquity Device dengan OpenWRT yang sudah terinstalasi. Pastikan menggunakan kamikaze firmware
* Ubiquity Device dengan OpenWRT yang sudah terinstalasi. Pastikan menggunakan kamikaze firmware


  http://kamikaze.openwrt.org/8.09.2/atheros/
  http://downloads.openwrt.org/snapshots/trunk/atheros/


* Akses Interent yang berlaku untuk Device & Computer
* Akses Interent yang berlaku untuk Device & Computer. Edit network pada OpenWRT UBNT agar sesuai dengan jaringan,
 
Edit Network
 
vi /etc/config/network
 
config interface lan
        option ifname  eth0
        option type    bridge
        option proto    static
        option ipaddr  192.168.0.10
        option netmask  255.255.255.0
        option gateway  192.168.0.222
 
Edit nameserver
 
vi /etc/resolv.conf
 
nameserver 8.8.8.8


==Instalasi==
==Instalasi==
Line 26: Line 44:
* install luci administration UI & olsr show
* install luci administration UI & olsr show


  opkg install olsrd
  mkdir /root/tmp
  opkg install luci-admin-full olsrd-luci
  opkg --tmp-dir /root/tmp install luci
 


==Konfigurasi==
==Konfigurasi==


* Login ke Web OpenWRT menggunakan password root yang sudah di set sebelumnya


Configure
* Masuk ke Services>OLSR dan konfigurasi OLSR daemon.
OLSR configuration page in Luci UI
Package installation page in Luci UI
 
5. Log in into the Luci UI typing the address of the router in your favourite web browser and using the root password


6. Go to Services>OLSR and configure the daemon. Image show valid generic settings.
* Paket tambahan bisa di install di System>Process. Luci compatible OLSR plugins start with olsr-luci-*. Then configure them in Services>OLSR>Plugins


7. You can install additional packages in System>Process. Luci compatible OLSR plugins start with olsr-luci-*. Then configure them in Services>OLSR>Plugins
==Monitoring==
Monitor
OLSR status page in Luci UI


8. Go to Status>OLSR and you'll find the "Neighbour Quality", "Neighbour Link Quality" and "ETX".
Monitor OLSR status di Luci UI melalui Status>OLSR.
Kita akan menemukan "Neighbour Quality", "Neighbour Link Quality" and "ETX".


The NQ parameter shows how we see the neighbour from 0 (very bad) to 1 (very good). The NLQ parameter shows how the neighbour sees us from 0 (very bad) to 1 (very good). The ETX is the global transmission quality parameter and goes from 1 to infinite. Good links have ETX values from 1 to 2, regular ones from 2 to 3 and bad ones have values greater than 3. The colours help identifying the link quality
Cara membacanya:


NQ parameter  0 (sangat jelek) s/d 1 (sangat baik)
NLQ parameter  0 (sangat jelek) s/d 1 (sangat baik)
ETX paremeter (global transmission quality) dari 1 s/d tak terhingga
ETX antara 1-2 sambungan baik
ETX antara 2-3 sambungan normal
ETX di atas 3 sambungan tidak baik


==Referensi==
==Referensi==


* http://wiki.ubnt.com/OLSR_on_OpenWrt
* http://wiki.ubnt.com/OLSR_on_OpenWrt


==Pranala Menarik==
==Pranala Menarik==
Line 64: Line 82:
* [[UBNT: openwrt]]
* [[UBNT: openwrt]]
* [[UBNT: olsr dengan openwrt]]
* [[UBNT: olsr dengan openwrt]]
* [[UBNT: olsr dengan kamikaze openwrt]]
* [[UBNT: olsr dengan backfire openwrt]] '''RECOMMENDED'''
* [[UBNT: UniFi]]
* [[UBNT: UniFi]]
* [[UBNT: UniFi Konfigurasi Awal]]
* [[UBNT: UniFi Manajemen HotSpot]]
* [[UBNT: OLSR Pembuatan Firmware]]
* [[UBNT: OLSR Konfigurasi]]
* [[OLSR - di UBNT]]
* [[OLSR - di UBNT]]
* [[OLSR - di Ubuntu]]
* [[OpenWRT]]

Latest revision as of 00:58, 22 July 2012

Sumber: http://wiki.ubnt.com/OLSR_on_OpenWrt

Tulisan ini menerangkan cara menginstalasi, konfigurasi dan monitor OLSR di Ubiquiti Device dengan OpenWRT yang di install.


Kebutuhan

  • Komputer dengan Browser (mis. Firefox) dan ssh client.
  • Ubiquity Device dengan OpenWRT yang sudah terinstalasi. Pastikan menggunakan kamikaze firmware
http://downloads.openwrt.org/snapshots/trunk/atheros/
  • Akses Interent yang berlaku untuk Device & Computer. Edit network pada OpenWRT UBNT agar sesuai dengan jaringan,

Edit Network 

vi /etc/config/network

config interface lan
        option ifname   eth0
        option type     bridge
        option proto    static
        option ipaddr   192.168.0.10
        option netmask  255.255.255.0
        option gateway  192.168.0.222

Edit nameserver 

vi /etc/resolv.conf

nameserver 8.8.8.8

Instalasi

  • Pastikan kita sudah menset root password & akses ssh ke device
  • ssh ke device, misalnya
ssh root@192.168.1.1
  • update opkg.list
opkg update
  • install luci administration UI & olsr show
mkdir /root/tmp
opkg --tmp-dir /root/tmp install luci

Konfigurasi

  • Login ke Web OpenWRT menggunakan password root yang sudah di set sebelumnya
  • Masuk ke Services>OLSR dan konfigurasi OLSR daemon.
  • Paket tambahan bisa di install di System>Process. Luci compatible OLSR plugins start with olsr-luci-*. Then configure them in Services>OLSR>Plugins

Monitoring

Monitor OLSR status di Luci UI melalui Status>OLSR. Kita akan menemukan "Neighbour Quality", "Neighbour Link Quality" and "ETX".

Cara membacanya: 

NQ parameter   0 (sangat jelek) s/d 1 (sangat baik)
NLQ parameter  0 (sangat jelek) s/d 1 (sangat baik)
ETX paremeter (global transmission quality) dari 1 s/d tak terhingga
ETX antara 1-2 sambungan baik
ETX antara 2-3 sambungan normal
ETX di atas 3 sambungan tidak baik

Referensi

Pranala Menarik

Retrieved from "https://lms.onnocenter.or.id/wiki/index.php?title=UBNT:_olsr_dengan_openwrt&oldid=33206"