UBNT: olsr dengan openwrt: Difference between revisions

From OnnoCenterWiki
Jump to navigationJump to search
← Older edit
Onnowpurbo (talk | contribs)
69,477 edits
Onnowpurbo (talk | contribs)
69,477 edits
No edit summary
Onnowpurbo (talk | contribs)
69,477 edits
 
(7 intermediate revisions by the same user not shown)
Line 44: Line 44:
* install luci administration UI & olsr show
* install luci administration UI & olsr show


  opkg install luci-admin-full olsrd-luci luci-app-olsr
  mkdir /root/tmp
opkg install olsrd-luci-mod-dyn-gw olsrd-luci-mod-dyn-gw-plain olsrd-luci-mod-txtinfo
  opkg --tmp-dir /root/tmp install luci
  opkg install olsrd-luci-mod-dot-draw olsrd-luci-mod-watchdog olsrd-luci-mod-httpinfo
opkg install olsrd-luci-mod-bmf olsrd-luci-mod-arprefresh


==Konfigurasi==
==Konfigurasi==
Line 55: Line 53:
* Masuk ke Services>OLSR dan konfigurasi OLSR daemon.
* Masuk ke Services>OLSR dan konfigurasi OLSR daemon.


* Paket tambahan bisa di install di System>Process. Luci compatible OLSR plugins start with olsr-luci-*. Then configure them in Services>OLSR>Plugins


7. You can install additional packages in System>Process. Luci compatible OLSR plugins start with olsr-luci-*. Then configure them in Services>OLSR>Plugins
==Monitoring==
Monitor
OLSR status page in Luci UI


8. Go to Status>OLSR and you'll find the "Neighbour Quality", "Neighbour Link Quality" and "ETX".
Monitor OLSR status di Luci UI melalui Status>OLSR.
Kita akan menemukan "Neighbour Quality", "Neighbour Link Quality" and "ETX".


The NQ parameter shows how we see the neighbour from 0 (very bad) to 1 (very good). The NLQ parameter shows how the neighbour sees us from 0 (very bad) to 1 (very good). The ETX is the global transmission quality parameter and goes from 1 to infinite. Good links have ETX values from 1 to 2, regular ones from 2 to 3 and bad ones have values greater than 3. The colours help identifying the link quality
Cara membacanya:
 
NQ parameter   0 (sangat jelek) s/d 1 (sangat baik)
NLQ parameter 0 (sangat jelek) s/d 1 (sangat baik)
ETX paremeter (global transmission quality) dari 1 s/d tak terhingga
ETX antara 1-2 sambungan baik
ETX antara 2-3 sambungan normal
ETX di atas 3 sambungan tidak baik


==Referensi==
==Referensi==


* http://wiki.ubnt.com/OLSR_on_OpenWrt
* http://wiki.ubnt.com/OLSR_on_OpenWrt


==Pranala Menarik==
==Pranala Menarik==
Line 78: Line 82:
* [[UBNT: openwrt]]
* [[UBNT: openwrt]]
* [[UBNT: olsr dengan openwrt]]
* [[UBNT: olsr dengan openwrt]]
* [[UBNT: olsr dengan kamikaze openwrt]]
* [[UBNT: olsr dengan backfire openwrt]] '''RECOMMENDED'''
* [[UBNT: UniFi]]
* [[UBNT: UniFi]]
* [[UBNT: UniFi Konfigurasi Awal]]
* [[UBNT: UniFi Manajemen HotSpot]]
* [[UBNT: OLSR Pembuatan Firmware]]
* [[UBNT: OLSR Konfigurasi]]
* [[OLSR - di UBNT]]
* [[OLSR - di UBNT]]
* [[OLSR - di Ubuntu]]
* [[OpenWRT]]

Latest revision as of 00:58, 22 July 2012

Sumber: http://wiki.ubnt.com/OLSR_on_OpenWrt

Tulisan ini menerangkan cara menginstalasi, konfigurasi dan monitor OLSR di Ubiquiti Device dengan OpenWRT yang di install.


Kebutuhan

  • Komputer dengan Browser (mis. Firefox) dan ssh client.
  • Ubiquity Device dengan OpenWRT yang sudah terinstalasi. Pastikan menggunakan kamikaze firmware
http://downloads.openwrt.org/snapshots/trunk/atheros/
  • Akses Interent yang berlaku untuk Device & Computer. Edit network pada OpenWRT UBNT agar sesuai dengan jaringan,

Edit Network 

vi /etc/config/network

config interface lan
        option ifname   eth0
        option type     bridge
        option proto    static
        option ipaddr   192.168.0.10
        option netmask  255.255.255.0
        option gateway  192.168.0.222

Edit nameserver 

vi /etc/resolv.conf

nameserver 8.8.8.8

Instalasi

  • Pastikan kita sudah menset root password & akses ssh ke device
  • ssh ke device, misalnya
ssh root@192.168.1.1
  • update opkg.list
opkg update
  • install luci administration UI & olsr show
mkdir /root/tmp
opkg --tmp-dir /root/tmp install luci

Konfigurasi

  • Login ke Web OpenWRT menggunakan password root yang sudah di set sebelumnya
  • Masuk ke Services>OLSR dan konfigurasi OLSR daemon.
  • Paket tambahan bisa di install di System>Process. Luci compatible OLSR plugins start with olsr-luci-*. Then configure them in Services>OLSR>Plugins

Monitoring

Monitor OLSR status di Luci UI melalui Status>OLSR. Kita akan menemukan "Neighbour Quality", "Neighbour Link Quality" and "ETX".

Cara membacanya: 

NQ parameter   0 (sangat jelek) s/d 1 (sangat baik)
NLQ parameter  0 (sangat jelek) s/d 1 (sangat baik)
ETX paremeter (global transmission quality) dari 1 s/d tak terhingga
ETX antara 1-2 sambungan baik
ETX antara 2-3 sambungan normal
ETX di atas 3 sambungan tidak baik

Referensi

Pranala Menarik

Retrieved from "https://lms.onnocenter.or.id/wiki/index.php?title=UBNT:_olsr_dengan_openwrt&oldid=33206"