Cisco: Static Routing Sedehana: Difference between revisions

From OnnoCenterWiki
Jump to navigationJump to search
← Older edit
Onnowpurbo (talk | contribs)
69,477 edits
Onnowpurbo (talk | contribs)
69,477 edits
No edit summary
Onnowpurbo (talk | contribs)
69,477 edits
 
(8 intermediate revisions by the same user not shown)
Line 17: Line 17:
  configure terminal
  configure terminal
   interface ethernet1/1
   interface ethernet1/1
     ip address 10.1.1.2 255.255.255.0  # static ke internet
     ip address dhcp
     ip address dhcp                    # dhcp ke internet
     ip dhcp client request
     no shutdown
     no shutdown
     exit
     exit
Line 47: Line 47:
   exit
   exit
  copy running-config startup-config
  copy running-config startup-config
==Request DHCP==
enable
config terminal
  interface ethernet1/1
    ip dhcp client request
    exit
  exit




Line 68: Line 59:
  ping 192.168.1.1
  ping 192.168.1.1


==Tambahan Kalau Membutuhkan NAT==
Router1:
Using NAT to Allow Internal Users Access to the Internet
Perform this task to allow your internal users access to the Internet and conserve addresses in the inside global address pool using overloading of global addresses.
SUMMARY STEPS
enable
configure terminal
ip nat pool name start-ip end-ip {netmask netmask | prefix-length prefix-length }
access-list access-list-number permit source [source-wildcard ]
ip nat inside source list access-list-number pool name overload
interface type number
ip address ip-address mask
ip nat inside
exit
interface type number
ip address ip-address mask
ip nat outside
end
===Referensi===
* https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipaddr_nat/configuration/15-mt/nat-15-mt-book/iadnat-addr-consv.html


==Setting Client==
==Setting Client==
Line 117: Line 77:
==Pranala Menarik==
==Pranala Menarik==


* [[TCP/IP: Advanced Routing]]
* [[Quagga]]
* [[Mikrotik]]
* [[Cisco]]
* [[Cisco]]
* [[Juniper]]
* [[BIRD: Routing]]
* [[IPv6]]
* [[TCP/IP: Advanced Routing]]
* [[IPv6: Advanced Routing]]
* [[IPv6: Quagga]]
* [[IPv6: Mikrotik]]
* [[IPv6: Cisco]]
* [[IPv6: Juniper]]
* [[IPv6: BIRD: Routing]]
* [[IPv6]]

Latest revision as of 03:09, 5 January 2019


R1: 

Ethernet1/1 - ke Internet
Ethernet1/2 - R2: Ethernet 1/1
Ethernet1/3 - LAN

R2: 

Ethernet1/1 - R1: Ethernet1/2
Ethernet1/2 - LAN


R1: 

enable
configure terminal
  interface ethernet1/1
    ip address dhcp
    ip dhcp client request
    no shutdown
    exit
  interface ethernet1/2
    ip address 172.16.1.1 255.255.255.252
    no shutdown
    exit
  interface ethernet1/3
    ip address 192.168.1.1 255.255.255.0
    exit
  ip route 192.168.2.0 255.255.255.0 172.16.1.2
  exit
copy running-config startup-config

R2: 

enable
config terminal
   interface ethernet1/1
    ip address 172.16.1.2 255.255.255.252
    no shutdown
    exit
  interface ethernet1/2
    ip address 192.168.2.1 255.255.255.0
    exit
  ip route 192.168.1.0 255.255.255.0 172.16.1.1
  ip route 0.0.0.0 0.0.0.0 172.16.1.1
  exit
copy running-config startup-config


Test

R1: 

ping 192.168.2.1

R2: 

ping 192.168.1.1


Setting Client

LAN 1 Client: 

ip 192.168.1.2
gw 192.168.1.1


LAN 2 Client: 

ip 192.168.2.2
gw 192.168.2.1


Pranala Menarik


Retrieved from "https://lms.onnocenter.or.id/wiki/index.php?title=Cisco:_Static_Routing_Sedehana&oldid=54087"