UBNT: Upload Firmware: Difference between revisions
From OnnoCenterWiki
Jump to navigationJump to search
Onnowpurbo (talk | contribs) No edit summary |
Onnowpurbo (talk | contribs) No edit summary |
||
| Line 2: | Line 2: | ||
* Set IP PC 192.168.1.x | * Set IP PC 192.168.1.x | ||
* Pindah ke folder tempat image, misalnya | |||
~/ubnt-4.x/SDK.UBNT.v4.0.1.4978/rootfs/XS2.ar2316.v4.0.1.SDK.120721.0508 | |||
* Matikan Device UBNT | * Matikan Device UBNT | ||
* Tekan tombol Reset | * Tekan tombol Reset | ||
| Line 12: | Line 16: | ||
tftp> binary | tftp> binary | ||
tftp> trace | tftp> trace | ||
tftp> put | tftp> put XS2.ar2316.v4.0.1.SDK.120721.0508.bin flash_update | ||
==Pranala Menarik== | ==Pranala Menarik== | ||
Revision as of 22:23, 20 July 2012
Teknik upload firmware sama dengan teknik recovery
- Set IP PC 192.168.1.x
- Pindah ke folder tempat image, misalnya
~/ubnt-4.x/SDK.UBNT.v4.0.1.4978/rootfs/XS2.ar2316.v4.0.1.SDK.120721.0508
- Matikan Device UBNT
- Tekan tombol Reset
- Nyalakan Device UBNT
- Lepaskan tombol Reset setelah ~10 detik (tidak lebih) sesudah device UBNT di nyalakan. Kita akan mengetahui-nya karena LED akan berubah.
- Ping 192.168.1.20. Jika ada responds, kita siap untuk meng-upload image. Jika tidak maka mulai lagi dari awal.
- tftp image menggunakan mode binary ke 192.168.1.20 sebagai 'flash_update'.
tftp 192.168.1.20 tftp> binary tftp> trace tftp> put XS2.ar2316.v4.0.1.SDK.120721.0508.bin flash_update
