UBNT: Teknik Recovery: Difference between revisions
From OnnoCenterWiki
Jump to navigationJump to search
Onnowpurbo (talk | contribs) |
Onnowpurbo (talk | contribs) |
||
| Line 21: | Line 21: | ||
* [[UBNT: Upload Firmware]] | * [[UBNT: Upload Firmware]] | ||
* [[UBNT: Rebuild Firmware]] | * [[UBNT: Rebuild Firmware]] | ||
* [[UBNT: firmware dengan OLSR]] | |||
* [[UBNT: openwrt]] | * [[UBNT: openwrt]] | ||
* [[UBNT: olsr dengan openwrt]] | * [[UBNT: olsr dengan openwrt]] | ||
* [[UBNT: UniFi]] | |||
* [[OLSR - di UBNT]] | * [[OLSR - di UBNT]] | ||
Revision as of 02:11, 21 July 2012
Kalau salah flash firmware langkah yang perlu dilakukan
- Set IP PC 192.168.1.x
- Matikan Device UBNT
- Tekan tombol Reset
- Nyalakan Device UBNT
- Lepaskan tombol Reset setelah ~10 detik (tidak lebih) sesudah device UBNT di nyalakan. Kita akan mengetahui-nya karena LED akan berubah.
- Ping 192.168.1.20. Jika ada responds, kita siap untuk meng-upload image. Jika tidak maka mulai lagi dari awal.
- tftp image menggunakan mode binary ke 192.168.1.20 sebagai 'flash_update'.
tftp 192.168.1.20 tftp> binary tftp> trace tftp> put image.bin flash_update
