OpenWRT IPv6: Setup tunnel ke tunnelbroker: Difference between revisions
From OnnoCenterWiki
Jump to navigationJump to search
Onnowpurbo (talk | contribs) No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
opkg update | opkg update | ||
opkg install 6in4 | opkg install 6in4 | ||
uci set network.henet=interface | uci set network.henet=interface | ||
uci set network.henet.proto=6in4 | uci set network.henet.proto=6in4 | ||
uci set network.henet.peeraddr=216.218.221.42 | uci set network.henet.peeraddr=216.218.221.42 | ||
uci set network.henet.ip6addr='2001:470:35:ab6::2/64' | uci set network.henet.ip6addr='2001:470:35:ab6::2/64' | ||
uci set network.henet.tunnelid=208951 | uci set network.henet.tunnelid=208951 | ||
uci set network.henet.username=tb51aa9310a105d0.19920640 | uci set network.henet.username=tb51aa9310a105d0.19920640 | ||
uci set network.henet.password='YOUR_PASSWORD' | uci set network.henet.password='YOUR_PASSWORD' | ||
uci commit network | uci commit network | ||
uci set firewall.@zone[1].network='wan henet' | uci set firewall.@zone[1].network='wan henet' | ||
uci commit firewall | uci commit firewall | ||
ifup henet | ifup henet | ||
/etc/init.d/firewall restart | /etc/init.d/firewall restart | ||
Revision as of 03:24, 3 June 2013
opkg update opkg install 6in4 uci set network.henet=interface uci set network.henet.proto=6in4 uci set network.henet.peeraddr=216.218.221.42 uci set network.henet.ip6addr='2001:470:35:ab6::2/64' uci set network.henet.tunnelid=208951 uci set network.henet.username=tb51aa9310a105d0.19920640 uci set network.henet.password='YOUR_PASSWORD' uci commit network uci set firewall.@zone[1].network='wan henet' uci commit firewall ifup henet /etc/init.d/firewall restart
Replace YOUR_PASSWORD above with your tunnelbroker.net account password.
NOTE: When behind a firewall appliance that passes protocol 41, use the IPv4 address you get from your appliance's DHCP service instead of the IPv4 endpoint you provided to our broker.
The configurations provided are example configurations and may be different depending on the version of the OS or the tools you are using. If you have any issues getting your tunnel to work please contact us at ipv6@he.net and we will be happy to assist you.
