Mikrotik: OSPF Sederhana: Difference between revisions
From OnnoCenterWiki
Jump to navigationJump to search
Onnowpurbo (talk | contribs) No edit summary |
Onnowpurbo (talk | contribs) No edit summary |
||
| Line 23: | Line 23: | ||
Ada tiga (3) elemen dasar konfigurasi OSPF: | |||
* Enable OSPF instance | * Enable OSPF instance | ||
| Line 29: | Line 29: | ||
* OSPF network configuration | * OSPF network configuration | ||
instance name=default sudah ada, tidak perlu di tambahkan, tapi kalau perlu menambahkan caranya adalah sebagai berikut | |||
R1: | R1: | ||
/routing ospf instance> add name=default | |||
R2: | R2: | ||
/routing ospf instance> add name=default | |||
R3: | R3: | ||
/routing ospf instance> add name=default | |||
Cek | Cek | ||
/routing ospf instance> print | |||
Flags: X - disabled | Flags: X - disabled | ||
| Line 56: | Line 57: | ||
Buat bridge "loopback" untuk R1, R2, R3 | |||
/interface bridge add name=loopback | |||
/ip address add address=10.255.255.1/32 interface=loopback | |||
/routing ospf instance set 0 router-id=10.255.255.1 | |||
Catatan: Ingat bahwa backbone area-id adalah 0.0.0.0. | |||
R1 | |||
/routing ospf network add network=210.13.1.0/28 area=backbone | |||
/routing ospf network add network=0.0.0.0/0 area=backbone # default ke Internet | |||
/routing ospf network add network=10.10.1.0/30 area=backbone | |||
/routing ospf network add network=10.10.1.4/30 area=backbone | |||
R2 | |||
R3 | |||
Instead of typing in each network, you can aggregate networks using appropriate subnet mask. For example, to aggregate 10.10.1.0/30, 10.10.1.4/30, 10.10.1.8/30 networks, you can set up following ospf network: | Instead of typing in each network, you can aggregate networks using appropriate subnet mask. For example, to aggregate 10.10.1.0/30, 10.10.1.4/30, 10.10.1.8/30 networks, you can set up following ospf network: | ||
Revision as of 03:48, 13 November 2018
Router1:
/ip address add address=10.10.1.1/30 interface=ether1 /ip address add address=10.10.1.5/30 interface=ether2 /ip address add address=210.13.1.0/28 interface=ether3 # kalau ether3 statik /ip dhcp-client add interface=ether3 disabled=no # kalau ether3 DHCP client
Router2:
/ip address add address=10.10.1.6/30 interface=ether1 /ip address add address=10.10.1.9/30 interface=ether2 /ip address add address=172.16.1.0/16 interface=ether3
Router3:
/ip address add address=10.10.1.2 /30 interface=ether1 /ip address add address=10.10.1.10/30 interface=ether2 /ip address add address=192.168.1.0/24 interface=ether3
Ada tiga (3) elemen dasar konfigurasi OSPF:
- Enable OSPF instance
- OSPF area configuration
- OSPF network configuration
instance name=default sudah ada, tidak perlu di tambahkan, tapi kalau perlu menambahkan caranya adalah sebagai berikut
R1:
/routing ospf instance> add name=default
R2:
/routing ospf instance> add name=default
R3:
/routing ospf instance> add name=default
Cek
/routing ospf instance> print
Flags: X - disabled
0 name="default" router-id=0.0.0.0 distribute-default=never
redistribute-connected=as-type-1 redistribute-static=as-type-1
redistribute-rip=no redistribute-bgp=no redistribute-other-ospf=no
metric-default=1 metric-connected=20 metric-static=20 metric-rip=20
metric-bgp=auto metric-other-ospf=auto in-filter=ospf-in
out-filter=ospf-out
Buat bridge "loopback" untuk R1, R2, R3
/interface bridge add name=loopback /ip address add address=10.255.255.1/32 interface=loopback /routing ospf instance set 0 router-id=10.255.255.1
Catatan: Ingat bahwa backbone area-id adalah 0.0.0.0.
R1
/routing ospf network add network=210.13.1.0/28 area=backbone /routing ospf network add network=0.0.0.0/0 area=backbone # default ke Internet /routing ospf network add network=10.10.1.0/30 area=backbone /routing ospf network add network=10.10.1.4/30 area=backbone
R2
R3
Instead of typing in each network, you can aggregate networks using appropriate subnet mask. For example, to aggregate 10.10.1.0/30, 10.10.1.4/30, 10.10.1.8/30 networks, you can set up following ospf network:
[admin@MikroTikR1] /routing ospf network> add network=10.10.1.0/24 area=backbone
R2:
[admin@MikroTikR2] /routing ospf network> add network=172.16.1.0/16 area=backbone [admin@MikroTikR2] /routing ospf network> add network=10.10.1.0/24 area=backbone
R3:
[admin@MikroTikR3] /routing ospf network> add network=192.168.1.0/24 area=backbone [admin@MikroTikR3] /routing ospf network> add network=10.10.1.0/24 area=backbone
Verify
You can verify your OSPF operation as follows:
Look at the OSPF interface menu to verify that dynamic entry was created:
[admin@MikroTikR1] /routing ospf interface> print
Check your OSPF neighbors, what DR and BDR is elected and adjacencies established:
[admin@MikroTikR1] /routing ospf neighbor> print
Check router’s routing table (make sure OSPF routes are present):
[admin@MikroTik_CE1] > ip route print
Referensi
