Cisco: Static Routing Sedehana

Router1:

enable
configure terminal
  interface ethernet1/1
    ip address 10.1.1.2 255.255.255.0
    no shutdown
    exit
  interface ethernet1/2
    ip address 172.16.1.1 255.255.255.252
    no shutdown
    exit
  interface ethernet1/3
    ip address 192.168.1.1 255.255.255.0
    no shutdown 
    exit
  ip route 192.168.1.0 255.255.0.0 10.10.10.2
  exit

/ip address 
add address=10.1.1.2 interface=ether1 # ether1 kemungkinan dapat DHCP dari gateway Internet
add address=172.16.1.1/30 interface=ether2
add address=192.168.1.1/24 interface=ether3

/ip route 
add gateway=10.1.1.1
add dst-address=192.168.2.0/24 gateway=172.16.1.2

Router2:

/ip address
add address=172.16.1.2/30 interface=ether1
add address=192.168.2.1/24 interface=ether2

/ip route 
add gateway=172.16.1.1

Test

Router1:

ping 192.168.2.1

Router2:

ping 192.168.1.1

Tambahan Kalau Membutuhkan NAT

Router1:

/ip firewall nat add chain=srcnat out-interface=ether1 action=masquareade
/ip firewall nat print

Setting Client

LAN 1 Client:

ip 192.168.1.2
gw 192.168.1.1

LAN 2 Client:

ip 192.168.2.2
gw 192.168.2.1