Ushare: Difference between revisions

From OnnoCenterWiki
Jump to navigationJump to search
← Older editNewer edit →
Onnowpurbo (talk | contribs)
69,477 edits
Onnowpurbo (talk | contribs)
69,477 edits
No edit summary
Onnowpurbo (talk | contribs)
69,477 edits
No edit summary
Line 1: Line 1:
At first you need to be sure that you have setup a multicast route for UPnP messages. If you don't but have a default route attributed, then this later will be used. Otherwise, simply declare a new route for UPnP multicasts (for example using eth0 interface) :
Kita perlu menset / memastikan bahwa router yang ada siap untuk UPnP message. Kita dapat menggunakan setup manual seperti


route add -net 239.0.0.0 netmask 255.0.0.0 eth0
route add -net 239.0.0.0 netmask 255.0.0.0 eth0


uShare runs from the console only. It supports the usual --help option which displays usage and option information.
Instalasi ushare menggunakan perintah


Options:
apt-get install ushare
  -n, --name=NAME              Set UPnP Friendly Name (default is 'uShare')
  -i, --interface=IFACE        Use IFACE Network Interface (default is 'eth0')
  -f, --cfg=FILE              Config file to be used
  -p, --port=PORT              Forces the HTTP server to run on PORT
  -q, --telnet-port=PORT      Forces the TELNET server to run on PORT
  -c, --content=DIR            Share the content of DIR directory (default is './')
  -w, --no-web                Disable the control web page (enabled
        by default)
  -t, --no-telnet              Disable the TELNET control (enabled by default)
  -o, --override-iconv-err    If iconv fails parsing name, still add to media contents (hoping the renderer can handle it)
  -v, --verbose                Set verbose display.
  -x, --xbox                  Use XboX 360 compliant profile
  -d, --dlna                  Use DLNA compliant profile (PlayStation3 needs this)
  -D, --daemon                Run as a daemon.
  -V, --version                Display the version of uShare and exit
  -h, --help                  Display this help


uShare expects at least one directory argument (-c argument), specifying where multimedia files are stored. You should probably also use the -i option to specify which interface uShare should listen on.
 
uShare jalan melalui konsol. Cara menjalankan uShare dapat di ketahui melalui option --help
 
Options:
    -n, --name=NAME              Set UPnP Friendly Name (default is 'uShare')
    -i, --interface=IFACE        Use IFACE Network Interface (default is 'eth0')
    -f, --cfg=FILE              Config file to be used
    -p, --port=PORT              Forces the HTTP server to run on PORT
    -q, --telnet-port=PORT      Forces the TELNET server to run on PORT
    -c, --content=DIR            Share the content of DIR directory (default is './')
    -w, --no-web                Disable the control web page (enabled by default)
    -t, --no-telnet              Disable the TELNET control (enabled by default)
    -o, --override-iconv-err    If iconv fails parsing name, still add to media contents (hoping the renderer can handle it)
    -v, --verbose                Set verbose display.
    -x, --xbox                  Use XboX 360 compliant profile
    -d, --dlna                  Use DLNA compliant profile (PlayStation3 needs this)
    -D, --daemon                Run as a daemon.
    -V, --version                Display the version of uShare and exit
    -h, --help                  Display this help
 
uShare membutuhkan satu directory yang di share menggunakan argumen -c, tempat di mana file multimedia tersimpan.
 
 
specifying where multimedia files are stored. You should probably also use the -i option to specify which interface uShare should listen on.


ushare -c /shares
ushare -c /shares
Line 32: Line 39:
Just go to :
Just go to :


http://ip_address:port/web/ushare.html
http://ip_address:port/web/ushare.html


See the manual page for more details :
See the manual page for more details :


man ushare
man ushare


top Supported File Formats List
top Supported File Formats List


    * Video files: asf, avi, dv, divx, wmv, mjpg, mjpeg, mpeg, mpg, mpe, mp2p, vob, mp2t, m1v, m2v, m4v, m4p, mp4ps, ts, ogm, mkv, rmvb, mov, qt, hdmov
* Video files: asf, avi, dv, divx, wmv, mjpg, mjpeg, mpeg, mpg, mpe, mp2p, vob, mp2t, m1v, m2v, m4v, m4p, mp4ps, ts, ogm, mkv, rmvb, mov, qt, hdmov
    * Audio files: aac, ac3, aif, aiff, at3p, au, snd, dts, rmi, mp1, mp2, mp3, mp4, mpa, ogg, wav, pcm, lpcm, l16, wma, mka, ra, rm, ram, flac
* Audio files: aac, ac3, aif, aiff, at3p, au, snd, dts, rmi, mp1, mp2, mp3, mp4, mpa, ogg, wav, pcm, lpcm, l16, wma, mka, ra, rm, ram, flac
    * Images files: bmp, ico, gif, jpeg, jpg, jpe, pcd, png, pnm, ppm, qti, qtf, qtif, tif, tiff
* Images files: bmp, ico, gif, jpeg, jpg, jpe, pcd, png, pnm, ppm, qti, qtf, qtif, tif, tiff
    * Playlist files: pls, m3u, asx
* Playlist files: pls, m3u, asx
    * Subtitle files: dks, idx, mpl, pjs, psb, scr, srt, ssa, stl, sub, tts, vsf, zeg
* Subtitle files: dks, idx, mpl, pjs, psb, scr, srt, ssa, stl, sub, tts, vsf, zeg
    * Various text files: bup, ifo
* Various text files: bup, ifo
 
 


==Referensi==
==Referensi==

Revision as of 07:58, 24 May 2011

Kita perlu menset / memastikan bahwa router yang ada siap untuk UPnP message. Kita dapat menggunakan setup manual seperti 

route add -net 239.0.0.0 netmask 255.0.0.0 eth0

Instalasi ushare menggunakan perintah 

apt-get install ushare


uShare jalan melalui konsol. Cara menjalankan uShare dapat di ketahui melalui option --help 

Options:
   -n, --name=NAME              Set UPnP Friendly Name (default is 'uShare')
   -i, --interface=IFACE        Use IFACE Network Interface (default is 'eth0')
   -f, --cfg=FILE               Config file to be used
   -p, --port=PORT              Forces the HTTP server to run on PORT
   -q, --telnet-port=PORT       Forces the TELNET server to run on PORT
   -c, --content=DIR            Share the content of DIR directory (default is './')
   -w, --no-web                 Disable the control web page (enabled by default)
   -t, --no-telnet              Disable the TELNET control (enabled by default)
   -o, --override-iconv-err     If iconv fails parsing name, still add to media contents (hoping the renderer can handle it)
   -v, --verbose                Set verbose display.
   -x, --xbox                   Use XboX 360 compliant profile
   -d, --dlna                   Use DLNA compliant profile (PlayStation3 needs this)
   -D, --daemon                 Run as a daemon.
   -V, --version                Display the version of uShare and exit
   -h, --help                   Display this help

uShare membutuhkan satu directory yang di share menggunakan argumen -c, tempat di mana file multimedia tersimpan.


specifying where multimedia files are stored. You should probably also use the -i option to specify which interface uShare should listen on.

ushare -c /shares ushare -c /shares1 --content=/shares2

You can also perform remote control of uShare UPnP Media Server through its web interface. This let you define new content locations at runtime or update the currently shared one in case the filesystem has changed.

Just go to : 

http://ip_address:port/web/ushare.html

See the manual page for more details : 

man ushare

top Supported File Formats List

  • Video files: asf, avi, dv, divx, wmv, mjpg, mjpeg, mpeg, mpg, mpe, mp2p, vob, mp2t, m1v, m2v, m4v, m4p, mp4ps, ts, ogm, mkv, rmvb, mov, qt, hdmov
  • Audio files: aac, ac3, aif, aiff, at3p, au, snd, dts, rmi, mp1, mp2, mp3, mp4, mpa, ogg, wav, pcm, lpcm, l16, wma, mka, ra, rm, ram, flac
  • Images files: bmp, ico, gif, jpeg, jpg, jpe, pcd, png, pnm, ppm, qti, qtf, qtif, tif, tiff
  • Playlist files: pls, m3u, asx
  • Subtitle files: dks, idx, mpl, pjs, psb, scr, srt, ssa, stl, sub, tts, vsf, zeg
  • Various text files: bup, ifo

Referensi

Pranala Menarik

Retrieved from "https://lms.onnocenter.or.id/wiki/index.php?title=Ushare&oldid=26723"