OpenBTS: RangeNetwork Compile OpenBTS 3.1.3

Sumber: http://wush.net/trac/rangepublic/wiki/InstallOpenBTSrP313

Install Pendukung

sudo apt-get install autoconf libtool libosip2-dev libusb-1.0-0-dev g++ sqlite3 \
libsqlite3-dev erlang libreadline6-dev libncurses5-dev libortp-dev libortp

Install liba53

cd /home/openbts/software/public
cd a53/trunk
sudo make install

Compile

Building OpenBTS OpenBTS

The build is fairly similar to what is described in the guide. However, we don't want to build from trunk. Here we build with a USRP; substitute the "sudo ./configure" line with the appropriate line from http://wush.net/trac/rangepublic/wiki/BuildInstallRun#BuildingOpenBTS?. From the root source directory (public),

cd /home/openbts/software/public/openbts/tags/rP3.1.3
sudo autoreconf -i
sudo ./configure --with-uhd --with-resamp 
sudo make

cd apps
sudo ln -s ../Transceiver52M/transceiver .

You will then need to create the default OpenBTS configuration database.

sudo mkdir /etc/OpenBTS 
sudo sqlite3 -init ./apps/OpenBTS.example.sql /etc/OpenBTS/OpenBTS.db ".quit" 

Running the following should dump out the default configurations.

sqlite3 /etc/OpenBTS/OpenBTS.db .dump

Subscriber Registry

Make the Asterisk subscriber registry directory. Do not load the default as shown in the Wush guide, it will be automatically populated.

sudo mkdir -p /var/lib/asterisk/sqlite3dir  

Build SIPAuthServe. From the public directory:

cd subscriberRegistry/tags/rP3.1.3
sudo make

Then you will need to initialize the subscriberRegistry config database. Run:

cd subscriberRegistry
sudo sqlite3 -init subscriberRegistry.example.sql /etc/OpenBTS/sipauthserve.db ".quit" 

smqueue

Build SMQueue. From the public directory:

cd smqueue/tags/rP3.1.3
sudo autoreconf -i
sudo ./configure
sudo make

You can now run OpenBTS as you would a normal trunk install.

Referensi

• http://wush.net/trac/rangepublic/wiki/InstallOpenBTSrP313