|
|
| Line 1: |
Line 1: |
| SMTP-SINK(1) SMTP-SINK(1)
| | Postfix sudah menyediakan smtp-sink untuk mentest postfix dalam mengirimkan e-mail dalam jumlah besar. |
| | |
| NAME
| |
| smtp-sink - parallelized SMTP/LMTP test server
| |
| | |
| SYNOPSIS
| |
| smtp-sink [options] [inet:][host]:port backlog
| |
| | |
| smtp-sink [options] unix:pathname backlog
| |
| | |
| DESCRIPTION
| |
| smtp-sink listens on the named host (or address) and port. It takes
| |
| SMTP messages from the network and throws them away. The purpose is to
| |
| measure client performance, not protocol compliance.
| |
| | |
| smtp-sink may also be configured to capture each mail delivery transac-
| |
| tion to file. Since disk latencies are large compared to network
| |
| delays, this mode of operation can reduce the maximal performance by
| |
| several orders of magnitude.
| |
| | |
| Connections can be accepted on IPv4 or IPv6 endpoints, or on
| |
| UNIX-domain sockets. IPv4 and IPv6 are the default. This program is
| |
| the complement of the smtp-source(1) program.
| |
| | |
| Note: this is an unsupported test program. No attempt is made to main-
| |
| tain compatibility between successive versions.
| |
| | |
| Arguments:
| |
| | |
| -4 Support IPv4 only. This option has no effect when Postfix is
| |
| built without IPv6 support.
| |
| | |
| -6 Support IPv6 only. This option is not available when Postfix is
| |
| built without IPv6 support.
| |
| | |
| -8 Do not announce 8BITMIME support.
| |
| | |
| -a Do not announce SASL authentication support.
| |
| | |
| -A delay
| |
| Wait delay seconds after responding to DATA, then abort prema-
| |
| turely with a 550 reply status. Do not read further input from
| |
| the client; this is an attempt to block the client before it
| |
| sends ".". Specify a zero delay value to abort immediately.
| |
| | |
| -b soft-bounce-reply
| |
| Use soft-bounce-reply for soft reject responses. The default
| |
| reply is "450 4.3.0 Error: command failed".
| |
| | |
| -B hard-bounce-reply
| |
| Use hard-bounce-reply for hard reject responses. The default
| |
| reply is "500 5.3.0 Error: command failed".
| |
| | |
| -c Display running counters that are updated whenever an SMTP ses-
| |
| sion ends, a QUIT command is executed, or when "." is received.
| |
| | |
| -C Disable XCLIENT support.
| |
| | |
| -d dump-template
| |
| Dump each mail transaction to a single-message file whose name
| |
| is created by expanding the dump-template via strftime(3) and
| |
| appending a pseudo-random hexadecimal number (example:
| |
| "%Y%m%d%H/%M." expands into "2006081203/05.809a62e3"). If the
| |
| template contains "/" characters, missing directories are cre-
| |
| ated automatically. The message dump format is described below.
| |
| | |
| Note: this option keeps one capture file open for every mail
| |
| transaction in progress.
| |
| | |
| -D dump-template
| |
| Append mail transactions to a multi-message dump file whose name
| |
| is created by expanding the dump-template via strftime(3). If
| |
| the template contains "/" characters, missing directories are
| |
| created automatically. The message dump format is described
| |
| below.
| |
| | |
| Note: this option keeps one capture file open for every mail
| |
| transaction in progress.
| |
| | |
| -e Do not announce ESMTP support.
| |
| | |
| -E Do not announce ENHANCEDSTATUSCODES support.
| |
| | |
| -f command,command,...
| |
| Reject the specified commands with a hard (5xx) error code.
| |
| This option implies -p.
| |
| | |
| Examples of commands are CONNECT, HELO, EHLO, LHLO, MAIL, RCPT,
| |
| VRFY, DATA, ., RSET, NOOP, and QUIT. Separate command names by
| |
| white space or commas, and use quotes to protect white space
| |
| from the shell. Command names are case-insensitive.
| |
| | |
| -F Disable XFORWARD support.
| |
| | |
| -h hostname
| |
| Use hostname in the SMTP greeting, in the HELO response, and in
| |
| the EHLO response. The default hostname is "smtp-sink".
| |
| | |
| -H delay
| |
| Delay the first read operation after receiving DATA (time in
| |
| seconds). Combine with a large test message and a small TCP win-
| |
| dow size (see the -T option) to test the Postfix client
| |
| write_wait() implementation.
| |
| | |
| -L Enable LMTP instead of SMTP.
| |
| | |
| -m count (default: 256)
| |
| An upper bound on the maximal number of simultaneous connections
| |
| that smtp-sink will handle. This prevents the process from run-
| |
| ning out of file descriptors. Excess connections will stay
| |
| queued in the TCP/IP stack.
| |
| | |
| -M count
| |
| Terminate after receiving count messages.
| |
| | |
| -n count
| |
| Terminate after count sessions.
| |
| | |
| -N Do not announce support for DSN.
| |
| | |
| -p Do not announce support for ESMTP command pipelining.
| |
| | |
| -P Change the server greeting so that it appears to come through a
| |
| CISCO PIX system. Implies -e.
| |
| | |
| -q command,command,...
| |
| Disconnect (without replying) after receiving one of the speci-
| |
| fied commands.
| |
| | |
| Examples of commands are CONNECT, HELO, EHLO, LHLO, MAIL, RCPT,
| |
| VRFY, DATA, ., RSET, NOOP, and QUIT. Separate command names by
| |
| white space or commas, and use quotes to protect white space
| |
| from the shell. Command names are case-insensitive.
| |
| | |
| -Q command,command,...
| |
| Send a 421 reply and disconnect after receiving one of the spec-
| |
| ified commands.
| |
| | |
| Examples of commands are CONNECT, HELO, EHLO, LHLO, MAIL, RCPT,
| |
| VRFY, DATA, ., RSET, NOOP, and QUIT. Separate command names by
| |
| white space or commas, and use quotes to protect white space
| |
| from the shell. Command names are case-insensitive.
| |
| | |
| -r command,command,...
| |
| Reject the specified commands with a soft (4xx) error code.
| |
| This option implies -p.
| |
| | |
| Examples of commands are CONNECT, HELO, EHLO, LHLO, MAIL, RCPT,
| |
| VRFY, DATA, ., RSET, NOOP, and QUIT. Separate command names by
| |
| white space or commas, and use quotes to protect white space
| |
| from the shell. Command names are case-insensitive.
| |
| | |
| -R root-directory
| |
| Change the process root directory to the specified location.
| |
| This option requires super-user privileges. See also the -u
| |
| option.
| |
| | |
| -s command,command,...
| |
| Log the named commands to syslogd.
| |
| | |
| Examples of commands are CONNECT, HELO, EHLO, LHLO, MAIL, RCPT,
| |
| VRFY, DATA, ., RSET, NOOP, and QUIT. Separate command names by
| |
| white space or commas, and use quotes to protect white space
| |
| from the shell. Command names are case-insensitive.
| |
| | |
| -S start-string
| |
| An optional string that is prepended to each message that is
| |
| written to a dump file (see the dump file format description
| |
| below). The following C escape sequences are supported: \a
| |
| (bell), \b (backspace), \f (formfeed), \n (newline), \r (car-
| |
| riage return), \t (horizontal tab), \v (vertical tab), \ddd (up
| |
| to three octal digits) and \\ (the backslash character).
| |
| | |
| -t timeout (default: 100)
| |
| Limit the time for receiving a command or sending a response.
| |
| The time limit is specified in seconds.
| |
| | |
| -T windowsize
| |
| Override the default TCP window size. To work around broken TCP
| |
| window scaling implementations, specify a value > 0 and < 65536.
| |
| | |
| -u username
| |
| Switch to the specified user privileges after opening the net-
| |
| work socket and optionally changing the process root directory.
| |
| This option is required when the process runs with super-user
| |
| privileges. See also the -R option.
| |
| | |
| -v Show the SMTP conversations.
| |
| | |
| -w delay
| |
| Wait delay seconds before responding to a DATA command.
| |
| | |
| -W command:delay[:odds]
| |
| Wait delay seconds before responding to command. If odds is
| |
| also specified (a number between 1-99 inclusive), wait for a
| |
| random multiple of delay. The random multiplier is equal to the
| |
| number of times the program needs to roll a dice with a range of
| |
| 0..99 inclusive, before the dice produces a result greater than
| |
| or equal to odds.
| |
| | |
| [inet:][host]:port
| |
| Listen on network interface host (default: any interface) TCP
| |
| port port. Both host and port may be specified in numeric or
| |
| symbolic form.
| |
| | |
| unix:pathname
| |
| Listen on the UNIX-domain socket at pathname.
| |
| | |
| backlog
| |
| The maximum length the queue of pending connections, as defined
| |
| by the listen(2) system call.
| |
| | |
| DUMP FILE FORMAT
| |
| Each dumped message contains a sequence of text lines, terminated with
| |
| the newline character. The sequence of information is as follows:
| |
| | |
| o The optional string specified with the -S option.
| |
| | |
| o The smtp-sink generated headers as documented below.
| |
| | |
| o The message header and body as received from the SMTP client.
| |
| | |
| o An empty line.
| |
| | |
| The format of the smtp-sink generated headers is as follows:
| |
| | |
| X-Client-Addr: text
| |
| The client IP address without enclosing []. An IPv6 address is
| |
| prefixed with "ipv6:". This record is always present.
| |
| | |
| X-Client-Proto: text
| |
| The client protocol: SMTP, ESMTP or LMTP. This record is always
| |
| present.
| |
| | |
| X-Helo-Args: text
| |
| The arguments of the last HELO or EHLO command before this mail
| |
| delivery transaction. This record is present only if the client
| |
| sent a recognizable HELO or EHLO command before the DATA com-
| |
| mand.
| |
| | |
| X-Mail-Args: text
| |
| The arguments of the MAIL command that started this mail deliv-
| |
| ery transaction. This record is present exactly once.
| |
| | |
| X-Rcpt-Args: text
| |
| The arguments of an RCPT command within this mail delivery
| |
| transaction. There is one record for each RCPT command, and they
| |
| are in the order as sent by the client.
| |
| | |
| Received: text
| |
| A message header for compatibility with mail processing soft-
| |
| ware. This three-line header marks the end of the headers pro-
| |
| vided by smtp-sink, and is formatted as follows:
| |
| | |
| from helo ([addr])
| |
| The HELO or EHLO command argument and client IP address.
| |
| If the client did not send HELO or EHLO, the client IP
| |
| address is used instead.
| |
| | |
| by host (smtp-sink) with proto id random;
| |
| The hostname specified with the -h option, the client
| |
| protocol (see X-Client-Proto above), and the pseudo-ran-
| |
| dom portion of the per-message capture file name.
| |
| | |
| time-stamp
| |
| A time stamp as defined in RFC 2822.
| |
| | |
| SEE ALSO
| |
| smtp-source(1), SMTP/LMTP message generator
| |
| | |
| LICENSE
| |
| The Secure Mailer license must be distributed with this software.
| |
| | |
| AUTHOR(S)
| |
| Wietse Venema
| |
| IBM T.J. Watson Research
| |
| P.O. Box 704
| |
| Yorktown Heights, NY 10598, USA
| |
|
| |
|
|
| |
|
| ==Menjalankan== | | ==Menjalankan== |
|
| |
|
| Now let's turn our attention to smtp-sink to find out how many messages per second your server can handle from your horrible mass mailing sofware. Postfix has to process each outgoing message even if the server on the other side throws it away (therefore, you can't use this to test the raw performance of your mass mailer unless you connect your mailer directly to smtp-sink).
| | Pertama-tama sinkronkan waktu di kedua mesin |
|
| |
|
| The following example sets up an SMTP listener on port 25 of localhost:
| | ntpdate pool.ntp.org |
|
| |
|
| $ ./smtp-sink -c localhost:25 1000
| |
|
| |
|
| Now you can run your client tests.
| | Setup SMTP listenser di port 25 (misalnya di localhost) |
|
| |
|
| If you want to get an idea for how much overhead the network imposes and also get a control experiment to see what the theoretical maximum throughput for a mail server, you can make smtp-source and smtp-sink talk to each other. Open two windows. In the first, start up the dummy server like this:
| |
|
| |
|
| # ./smtp-sink -c localhost:25 1000
| | smtp-sink -c localhost:25 1000 |
| 100
| |
|
| |
|
| With this in place, start throwing messages at this server with smtp-source in the other window:
| |
|
| |
|
| $ time ./smtp-source -s 20 -l 5120 -m 100 -c \
| | Bisa menggunakan postfix untuk mengirim atau dengan smtp-source. |
| -f sender@example.com -t recipient@example.com localhost:25
| |
| 100
| |
|
| |
|
| real 0m0.239s
| | time smtp-source -s 20 -l 5120 -m 100 -c 100 -f sender@example.com -t recipient@example.com localhost:25 |
| user 0m0.000s
| |
| sys 0m0.040s
| |
|
| |
|
| This output shows that smtp-sink is much faster at accepting messages than Postfix. It took only 0.239 seconds to accept the messages, which is 18 times faster than the Postfix injection process. Now, wouldn't it be nice if you could throw away all incoming email like this?
| | real 0m0.239s |
| | user 0m0.000s |
| | sys 0m0.040s |
|
| |
|
|
| |
|
