Mikrotik: Router Sederhana: Difference between revisions
From OnnoCenterWiki
Jump to navigationJump to search
Onnowpurbo (talk | contribs) No edit summary |
Onnowpurbo (talk | contribs) No edit summary |
||
| Line 8: | Line 8: | ||
add bridge=bridge1 interface=ethe | add bridge=bridge1 interface=ethe | ||
ip address add interface= | /ip address add interface=bridge1 address=192.168.1.1/24 | ||
ip route add gateway= | /ip route add gateway=bridge1 | ||
ip dns set servers=8.8.8.8 | /ip dns set servers=8.8.8.8 | ||
ip dns set allow-remote-request=yes | /ip dns set allow-remote-request=yes | ||
/ip dhcp-server setup | |||
/ip dhcp-server enable | |||
/ip dhcp-server print | |||
ip dhcp-server enable | |||
ip dhcp-server print | |||
/ip firewall nat add chain=srcnat out-interface=ether1 action=masquareade | |||
ip firewall nat add chain=srcnat out-interface=ether1 action=masquareade | /ip firewall nat print | ||
ip firewall nat print | |||
Revision as of 00:48, 25 November 2018
/interface bridge add name=bridge1 /interface bridge port add bridge=bridge1 interface=ether2 add bridge=bridge1 interface=ether3 add bridge=bridge1 interface=ether4 add bridge=bridge1 interface=ethe
/ip address add interface=bridge1 address=192.168.1.1/24 /ip route add gateway=bridge1
/ip dns set servers=8.8.8.8 /ip dns set allow-remote-request=yes
/ip dhcp-server setup /ip dhcp-server enable /ip dhcp-server print
/ip firewall nat add chain=srcnat out-interface=ether1 action=masquareade /ip firewall nat print
