BIRD: Static Routing Sederhana

Topologi

R1
e1 --> CLOUD nat0
e2 --> R2 e1
e3 --> LAN 192.168.1.1/24

R2
e1 --> R1 e2
e2 --> LAN 192.168.2.1/24

Jika menggunakan BIRD appliance di GNS3, maka PC / laptop kita perlu menjalankan

sudo chown root:onno /dev/kvm

Tapi jika menggunakan BIRD VirtualBox (dari OpenWRT), kita tidak perlu menjalankan perintah di atas.

Konfigurasi Shell

R1:

ifconfig eth1 192.168.122.100 netmask 255.255.255.0
ifconfig eth2 172.16.1.1 netmask 255.255.255.252
ifconfig eth3 192.168.1.1 netmask 255.255.255.0

R2:

ifconfig eth1 172.16.1.2 netmask 255.255.255.252
ifconfig eth2 192.168.2.1 netmask 255.255.255.0

Routing

R1:

vi /usr/local/etc/bird6.conf 

edit

router id 172.16.1.1; 
#
protocol direct {                                                    
        interface "-eth*", "*"; # Restrict network interfaces it works with
}   
#
protocol static {                                                               
       route 192.168.2.0/24 via 172.16.1.2;
} 

Restart BIRD

killall bird6
/usr/local/sbin/bird6 -u gns3 -g staff &

R2:

vi /usr/local/etc/bird6.conf 

edit

router id 172.16.1.2; 
#
protocol direct {                                                    
        interface "-eth*", "*"; # Restrict network interfaces it works with
}   
#
protocol static {                                                               
       route 192.168.1.0/24 via 172.16.1.1;
}

Restart BIRD

killall bird6
/usr/local/sbin/bird6 -u gns3 -g staff &

Test

R1:

ping 172.16.1.2
ping 192.168.2.1

R2:

ping 172.16.1.1
ping 192.168.1.1

Setting Client

LAN 1 Client:

ip 192.168.1.100/24 192.168.1.1

LAN 2 Client:

ip 192.168.2.100/24 192.168.1.1

Referensi

• https://wiki.mikrotik.com/wiki/Manual:Simple_Static_Routing

Pranala Menarik

• TCP/IP: Advanced Routing
• Quagga
• Mikrotik
• Cisco
• Juniper
• BIRD: Routing
• IPv6