Arduino: minicom 9600bps: Difference between revisions
From OnnoCenterWiki
Jump to navigationJump to search
Created page with " sudo apt-get install minicom sudo dmesg | grep tty sudo minicom -b 9600 -o -D /dev/ttyUSB0" |
No edit summary |
||
| Line 2: | Line 2: | ||
sudo dmesg | grep tty | sudo dmesg | grep tty | ||
[ 0.145092] printk: legacy console [tty0] enabled | |||
[ 0.489285] 0000:00:16.3: ttyS4 at I/O 0xf0a0 (irq = 19, base_baud = 115200) is a 16550A | |||
[ 2434.115161] usb 1-1: pl2303 converter now attached to ttyUSB0 | |||
onno@dell:~$ | |||
sudo minicom -b 9600 -o -D /dev/ttyUSB0 | sudo minicom -b 9600 -o -D /dev/ttyUSB0 | ||
Revision as of 01:51, 30 May 2024
sudo apt-get install minicom
sudo dmesg | grep tty
[ 0.145092] printk: legacy console [tty0] enabled [ 0.489285] 0000:00:16.3: ttyS4 at I/O 0xf0a0 (irq = 19, base_baud = 115200) is a 16550A [ 2434.115161] usb 1-1: pl2303 converter now attached to ttyUSB0
onno@dell:~$
sudo minicom -b 9600 -o -D /dev/ttyUSB0
