View source for Konfigurasi WPA di Slackware

 Date: Sun, 10 Aug 2008 08:53:49 -0700 (PDT)
 From: Dani Firman Syah <xnuxer@yahoo.com>
 To: muniardi munir <muniardi_ti@yahoo.co.id>, Onno W. Purbo <onno@indo.net.id>
 Cc: dani@xnuxer.or.id

Install terlebih dahulu paket wpa_supplicant di slackware, silahkan download di:

 http://www.slackware.com/~alien/slackbuilds/wpa_supplicant/pkg/current/wpa_supplicant-0.5.9-i486-1.tgz

buat konfigurasi wpa_supplicant.conf :

    # This line enables the use of wpa_cli which is used by rc.wireless
    # if possible (to check for successful association)
    ctrl_interface=/var/run/wpa_supplicant
    # By default, only root (group 0) may use wpa_cli
    ctrl_interface_group=0
    eapol_version=1
    ap_scan=1
    fast_reauth=1

    # WPA
    network={
    scan_ssid=0
    ssid="xxxx" # Sesuaikan dg SSID yg di pakai
    proto=WPA
    key_mgmt=WPA-PSK
    pairwise=CCMP TKIP
    group=CCMP TKIP WEP104 WEP40
    psk="xxxxxxxx"  # tulis PSK-Key nya disini
    }

Jalankan aplikasi wpa_supplicant, misal kalo device wireless Atheros-nya adalah ATH0 :

 wpa_supplicant -d -c /etc/wpa_supplicant.conf -iath0 -Dmadwifi

Konfigurasikan IP address sesuai dengan konfigurasi jaringan, kalo DHCP gunakan dhclient atau dhcpcd. Untuk static IP cukup gunakan ifconfig.

DNF