UBNT: Upload Firmware: Difference between revisions

From OnnoCenterWiki
Jump to navigationJump to search
← Older edit
Onnowpurbo (talk | contribs)
69,477 edits
Onnowpurbo (talk | contribs)
69,477 edits
Onnowpurbo (talk | contribs)
69,477 edits
No edit summary
 
(23 intermediate revisions by the same user not shown)
Line 1: Line 1:
Teknik upload firmware sama dengan teknik recovery
Teknik upload firmware sama dengan teknik recovery


* Set IP PC 192.168.1.x
* Set IP PC 192.168.1.254/24
 
ifconfig eth5 192.168.1.254 netmask 255.255.255.0
 
* Pindah ke folder tempat image, misalnya
* Pindah ke folder tempat image, misalnya


  ~/ubnt-4.x/SDK.UBNT.v4.0.1.4978/rootfs/XS2.ar2316.v4.0.1.SDK.120721.0508
  ~/openwrt.trunk/trunk/bin/atheros


* Matikan Device UBNT
* Matikan Device UBNT
* Tekan tombol Reset
* Tekan tombol Reset
* Nyalakan Device UBNT
* Nyalakan Device UBNT
* Lepaskan tombol Reset setelah ~10 detik (tidak lebih) sesudah device UBNT di nyalakan. Kita akan mengetahui-nya karena LED akan berubah.
* Lepaskan tombol Reset setelah ~10 detik (tidak lebih) sesudah device UBNT di nyalakan. Kita akan mengetahui-nya karena LED akan berubah / menyala seperti '''flip-flop'''.
* Ping 192.168.1.20. Jika ada responds, kita siap untuk meng-upload image. Jika tidak maka mulai lagi dari awal.
* Ping 192.168.1.20. Jika ada responds, kita siap untuk meng-upload image. Jika tidak maka mulai lagi dari awal.
* tftp image menggunakan mode binary ke 192.168.1.20 sebagai 'flash_update', misalnya,
* tftp image menggunakan mode binary ke 192.168.1.20 sebagai 'flash_update', misalnya,
Line 16: Line 19:
  tftp> binary
  tftp> binary
  tftp> trace
  tftp> trace
  tftp> put XS2.ar2316.v4.0.1.SDK.120721.0508.bin flash_update
  tftp> put openwrt-ath25-ubnt2-squashfs.bin flash_update
  ..
  ..
  ..
  ..
Line 26: Line 29:
  tftp> quit
  tftp> quit


==Coba Menggunakan Shell Scipt==
* install aplikasi
apt-get install tftp
* Buat shell script sederhana isinya
ifconfig eth5 192.168.1.254
cp openwrt-atheros-ubnt2-squashfs.bin code.bin
echo -e "binary\nrexmt 1\ntimeout 60\ntrace\nput openwrt-atheros-ubnt2-squashfs.bin flash_update\n" | tftp 192.168.1.20
* lakukan chmod 777 shellscript.sh tersebut
* Jalankan di folder tempat firmware berada
* Matikan UBNT
* Tekan Reset ~10 detik
* Nyalakan UBNT sambil reset di tekan.
* Pastikan lampu '''FLIP-FLOP'''
* '''JALANKAN SCRIPT'''
* Jika transfer berhasil maka lampu akan menyala ke kiri dan ke kanan terus menerus.
* Setelah Selesai ping sampai ada responds.
ping 192.168.1.20 (utk firmware UBNT)
ping 192.168.1.1  (utk firmware OpenWRT)


==Cek UBNT==
==Cek UBNT==


* Matikan Device UBNT
* Diamkan beberapa saat. Device jangan di apa-apakan.
* Nyalakan Device UBNT
* Tunggu sekitar 1 menit-an
* Tunggu sekitar 1 menit-an
* ping 192.168.1.20
* ping 192.168.1.20 atau 192.168.1.1
* Semoga ada responds :) ...
* Semoga ada responds :) ...
==Telnet untuk Reset Password==
* Setelah bisa ping
* telnet ke 192.168.1.1 untuk reset password


==Pranala Menarik==
==Pranala Menarik==
* [[OpenWRT]]
* [[OpenWRT: Download Firmware yang sudah jadi]]
* [[OpenWRT: Source Repository Download]]
* [[OpenWRT: Melihat Daftar Package]]
===Build Firmware===
* [[OpenWRT: Build Firmware]]
* [[OpenWRT: Build Firmware Download Source Pendukung]]
* [[OpenWRT: Build Firmware Buffalo WZRHPG450H]]
* [[OpenWRT: Build Firmware Buffalo WZRHPG300N]]
* [[OpenWRT: Build Firmware Buffalo WZRHPG300NH2]]
* [[Buffalo]]
* [[Buffalo: WZRHPG450H Cara Recovery]]
* [[Buffalo: WZRHPG450H OpenWRT mengaktifkan setelah di flash]]
* '''[[Buffalo: WZRHPG450H Membuat Firmware OpenWRT Sendiri]]''' '''RECOMMENDED'''
* [[Buffalo: WZRHPG450H OpenWRT instalasi aplikasi Pendukung OLSRD]]
* [[OpenWRT: Build Firmware Ubiquiti NanoStation2]] '''RECOMMENDED'''
* [[OpenWRT: Build Firmware Ubiquiti NanoStationM2]] '''RECOMMENDED'''
* [[OpenWRT: Build Firmware Mikrotik RB433]]
* [[OpenWRT: Build Firmware Linksys WRT160NL]]
* [[OpenWRT: Build Firmware Linksys WRT54GL]]
===APRX===
* [[OpenWRT: Build Firmware Buffalo WZRHPG300NH2 untuk APRX]]
===IPv6===
* [[OpenWRT: IPv6]]
* [[OpenWRT IPv6: Build Firmware Linksys WRT160NL]]
* [[OpenWRT IPv6: Build Firmware Linksys WRT160NL Tanpa WebGUI]]
* [[OpenWRT IPv6: Build Firmware Buffalo WZRHPG450H]]
* [[OpenWRT IPv6: Build Firmware Buffalo WZRHPG300NH2]]
* [[OpenWRT IPv6: Setup tunnel ke tunnelbroker]]
* [[OpenWRT IPv6: Konfigurasi]]
* [[OpenWRT IPv6: Konfigurasi WAN6 dengan radvd]]
===Flash Firmware===
* [[OpenWRT: Flash Linksys WRT54GL]]
* [[OpenWRT: Flash Linksys WRT160NL]]
* [[OpenWRT: Flash Buffalo WZRHP450H]] '''RECOMMENDED'''
* [[OpenWRT: Flash Buffalo WZRHP300N]]
* [[OpenWRT: Flash UBNT NanoStation2]] '''RECOMMENDED'''
* [[OpenWRT: Flash UBNT NanoStation M2]] '''RECOMMENDED'''
* [[OpenWRT: Flash UBNT NanoStation Loco M2]]
* [[OpenWRT: Flash UBNT Bullet M2]] '''RECOMMENDED'''
* [[OpenWRT: Flash Mikrotik RB433]] '''RECOMMENDED'''
* [[OpenWRT: Flash Mikrotik RB450]]
===Misc===
* [[OpenWRT: Setup WiFi]]
* [[OpenWRT: Setup PPTP VPN Server]]
* [[OpenWRT: Setup OLSR di UBNT via CLI]] '''RECOMMENDED'''
* [[OpenWRT: Mikrotik RB433]] '''RECOMMENDED'''
* [[OpenWRT: Setup OLSR Sederhana]]
* [[OpenWRT: Setup OLSR via Web]] '''RECOMMENDED'''
* [[OLSR - di OpenWRT]]
* [[OpenWRT: 3G modem]]
* [[OpenWRT: Build Firmware dengan 3G Modem Support]]
* [[OpenWRT: Setup Firewall]]
* [[OpenWRT: Konfigurasi UBNT NanoStation2 tanpa WebGUI]]
* [[OpenWRT: OLSR nameservice plugin]]
===UBNT===


* [[UBNT]]
* [[UBNT]]
Line 44: Line 150:
* [[UBNT: openwrt]]
* [[UBNT: openwrt]]
* [[UBNT: olsr dengan openwrt]]
* [[UBNT: olsr dengan openwrt]]
* [[UBNT: olsr dengan kamikaze openwrt]]
* [[UBNT: olsr dengan backfire openwrt]]
* [[UBNT: UniFi]]
* [[UBNT: UniFi]]
* [[UBNT: UniFi Konfigurasi Awal]]
* [[UBNT: UniFi Manajemen HotSpot]]
* [[UBNT: OLSR Pembuatan Firmware]]
* [[UBNT: OLSR Konfigurasi]]
* [[OLSR - di UBNT]]
* [[OLSR - di UBNT]]
* [[OLSR - di Ubuntu]]
* [[OpenWRT]]
* [[OLSR: NAT di UBNT dengan OLSR]]

Latest revision as of 08:51, 2 November 2015

Teknik upload firmware sama dengan teknik recovery

  • Set IP PC 192.168.1.254/24
ifconfig eth5 192.168.1.254 netmask 255.255.255.0
  • Pindah ke folder tempat image, misalnya
~/openwrt.trunk/trunk/bin/atheros
  • Matikan Device UBNT
  • Tekan tombol Reset
  • Nyalakan Device UBNT
  • Lepaskan tombol Reset setelah ~10 detik (tidak lebih) sesudah device UBNT di nyalakan. Kita akan mengetahui-nya karena LED akan berubah / menyala seperti flip-flop.
  • Ping 192.168.1.20. Jika ada responds, kita siap untuk meng-upload image. Jika tidak maka mulai lagi dari awal.
  • tftp image menggunakan mode binary ke 192.168.1.20 sebagai 'flash_update', misalnya,
tftp 192.168.1.20
tftp> binary
tftp> trace
tftp> put openwrt-ath25-ubnt2-squashfs.bin flash_update
..
..
sent DATA <block=6228, 512 bytes>
received ACK <block=6228>
sent DATA <block=6229, 351 bytes>
received ACK <block=6229>
Sent 3189087 bytes in 23.6 seconds
tftp> quit


Coba Menggunakan Shell Scipt

  • install aplikasi
apt-get install tftp
  • Buat shell script sederhana isinya
ifconfig eth5 192.168.1.254
cp openwrt-atheros-ubnt2-squashfs.bin code.bin
echo -e "binary\nrexmt 1\ntimeout 60\ntrace\nput openwrt-atheros-ubnt2-squashfs.bin flash_update\n" | tftp 192.168.1.20
  • lakukan chmod 777 shellscript.sh tersebut
  • Jalankan di folder tempat firmware berada
  • Matikan UBNT
  • Tekan Reset ~10 detik
  • Nyalakan UBNT sambil reset di tekan.
  • Pastikan lampu FLIP-FLOP
  • JALANKAN SCRIPT
  • Jika transfer berhasil maka lampu akan menyala ke kiri dan ke kanan terus menerus.
  • Setelah Selesai ping sampai ada responds.
ping 192.168.1.20 (utk firmware UBNT)
ping 192.168.1.1  (utk firmware OpenWRT)

Cek UBNT

  • Diamkan beberapa saat. Device jangan di apa-apakan.
  • Tunggu sekitar 1 menit-an
  • ping 192.168.1.20 atau 192.168.1.1
  • Semoga ada responds :) ...

Telnet untuk Reset Password

  • Setelah bisa ping
  • telnet ke 192.168.1.1 untuk reset password



Pranala Menarik

Build Firmware

APRX

IPv6

Flash Firmware

Misc

UBNT

Retrieved from "https://lms.onnocenter.or.id/wiki/index.php?title=UBNT:_Upload_Firmware&oldid=44796"