OpenWRT: Flash UBNT NanoStation Loco M2

Coba Menggunakan Shell Scipt

• Buat shell script sederhana isinya

ifconfig eth0 192.168.1.254
cp  openwrt-atheros-ubnt2-squashfs.bin code.bin
echo -e "binary\nrexmt 1\ntimeout 60\ntrace\nput openwrt-atheros-ubnt2-squashfs.bin flash_update\n" | tftp 192.168.1.20

• lakukan chmod 777 shellscript.sh tersebut
• Jalankan di folder tempat firmware berada
• Nyalakan UBNT
• Jika transfer berhasil maka lampu akan menyala ke kiri dan ke kanan terus menerus.
• ping sampai ada responds.

ping 192.168.1.20 (utk firmware UBNT)
ping 192.168.1.1  (utk firmware OpenWRT)

Pranala Menarik

• OpenWRT
• OpenWRT: Download Firmware yang sudah jadi
• OpenWRT: Source Repository Download
• OpenWRT: Melihat Daftar Package

Build Firmware

• OpenWRT: Build Firmware
• OpenWRT: Build Firmware Buffalo WZRHPG450H
• OpenWRT: Build Firmware Buffalo WZRHPG300N
• Buffalo
• Buffalo: WZRHPG450H Cara Recovery
• Buffalo: WZRHPG450H OpenWRT mengaktifkan setelah di flash
• Buffalo: WZRHPG450H Membuat Firmware OpenWRT Sendiri COOL
• Buffalo: WZRHPG450H OpenWRT instalasi aplikasi Pendukung OLSRD
• OpenWRT: Build Firmware Ubiquiti NanoStation2
• OpenWRT: Build Firmware Mikrotik RB433
• OpenWRT: Build Firmware Linksys WRT160NL
• OpenWRT: Build Firmware Linksys WRT54GL

Flash Firmware

• OpenWRT: Flash Linksys WRT54GL
• OpenWRT: Flash Linksys WRT160NL
• OpenWRT: Flash Buffalo WZRHP450H
• OpenWRT: Flash Buffalo WZRHP300N
• OpenWRT: Flash UBNT NanoStation2
• OpenWRT: Flash UBNT NanoStation M2
• OpenWRT: Flash UBNT NanoStation Loco M2

Misc

• OpenWRT: Setup OLSR di UBNT via CLI
• OpenWRT: Mikrotik RB433
• OpenWRT: Setup OLSR Sederhana
• OLSR - di OpenWRT
• OpenWRT: 3G modem
• OpenWRT: Build Firmware dengan 3G Modem Support
• OpenWRT: Setup Firewall
• OpenWRT: Konfigurasi UBNT NanoStation2 tanpa WebGUI
• UBNT