OpenWRT: Flash UBNT NanoStation Loco M2: Difference between revisions

From OnnoCenterWiki
Jump to navigationJump to search
← Older edit
Onnowpurbo (talk | contribs)
69,477 edits
Onnowpurbo (talk | contribs)
69,477 edits
Onnowpurbo (talk | contribs)
69,477 edits
 
Line 9: Line 9:
* lakukan chmod 777 shellscript.sh tersebut
* lakukan chmod 777 shellscript.sh tersebut
* Jalankan di folder tempat firmware berada
* Jalankan di folder tempat firmware berada
* Nyalakan UBNT
* Matikan UBNT
* Tekan Reset ~10 detik
* Nyalakan UBNT sambil reset di tekan.
* Pastikan lampu '''FLIP-FLOP'''
 
* '''JALANKAN SCRIPT'''
* Jika transfer berhasil maka lampu akan menyala ke kiri dan ke kanan terus menerus.
* Jika transfer berhasil maka lampu akan menyala ke kiri dan ke kanan terus menerus.
* ping sampai ada responds.
 
* Setelah Selesai ping sampai ada responds.


  ping 192.168.1.20 (utk firmware UBNT)
  ping 192.168.1.20 (utk firmware UBNT)
  ping 192.168.1.1  (utk firmware OpenWRT)
  ping 192.168.1.1  (utk firmware OpenWRT)


==Pranala Menarik==
==Pranala Menarik==

Latest revision as of 21:46, 10 December 2013

Coba Menggunakan Shell Scipt

  • Buat shell script sederhana isinya
ifconfig eth0 192.168.1.254
cp  openwrt-ar71xx-generic-ubnt-nano-m-squashfs-factory.bin code.bin
echo -e "binary\nrexmt 1\ntimeout 60\ntrace\nput code.bin flash_update\n" | tftp 192.168.1.20
  • lakukan chmod 777 shellscript.sh tersebut
  • Jalankan di folder tempat firmware berada
  • Matikan UBNT
  • Tekan Reset ~10 detik
  • Nyalakan UBNT sambil reset di tekan.
  • Pastikan lampu FLIP-FLOP
  • JALANKAN SCRIPT
  • Jika transfer berhasil maka lampu akan menyala ke kiri dan ke kanan terus menerus.
  • Setelah Selesai ping sampai ada responds.
ping 192.168.1.20 (utk firmware UBNT)
ping 192.168.1.1  (utk firmware OpenWRT)

Pranala Menarik

Build Firmware

APRX

IPv6

Flash Firmware

Misc

UBNT

Retrieved from "https://lms.onnocenter.or.id/wiki/index.php?title=OpenWRT:_Flash_UBNT_NanoStation_Loco_M2&oldid=38895"